Shetland Islands · Scotland
Commercial sealant contractors in ZE3
Our applicators cover all of the ZE3 postcode district, which takes in Hestingott, Scatness and Toab. Failed sealant is always cut out completely, with a 12-month guarantee.
Sealant contractors for ZE3
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Places in ZE3
Our services across ZE3
- Construction and new-build mastic
- Expansion and movement joint sealing
- Industrial and floor joint sealing
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Coloured and colour-matched sealant
- Commercial sealant contractors
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Every service
Tell us what needs doing and your postcode and we’ll come back with a price: call the office on 01277 525 020 or send details through our quote form.
Nearby postcode districts
Across the Shetland Islands
All places in the Shetland Islands
All areas
Commercial sealant contractors in ZE3: how it works
On older buildings, particularly those put up before 2000, some old mastics and sealants may contain asbestos. We ask to see the asbestos register or survey before old sealant is disturbed, because the duty to manage asbestos sits with the dutyholder. Anything suspect is left alone until it has been tested (removing asbestos-containing materials isn’t something we do). We work on washrooms and tea points, movement joints in walls and floors and window and door perimeters, and the failures we’re asked to look at most are wall and floor joints that have lost their seal and greasy, split joints in a kitchen or tea point.
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then handed back before we move to the next.
- We start with the evidence: photos, drawings or a look on site.
- You get a fixed quote covering removal, preparation and the new sealant.
- Sequence, access and working times are settled before the first joint is touched.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Backing goes in, the new sealant is laid and tooled, and the area is left neat.
- We hand back each area with its cure time and our 12-month guarantee.
Pricing in ZE3
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What you get with us
- Work carried out by CSCS-carded applicators
- Fixed quotes based on photographs, drawings or a visit
- One phone line for London, the South East and Scotland
- Fully insured
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to ring 01277 525 020 or email a schedule or drawings.
Around Hestingott
Around Hestingott, our work takes us to commercial buildings near Cross Kirk. Nearby you’ll also find Shetland Crofthouse Museum (1.7 miles north-east). For a walk, there’s Sumburgh Head RSPB reserve and Loch of Huesbreck.
Where commercial joints are in ZE3
Commercial buildings across ZE3 range from older premises altered many times to recent units on business parks. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
Our area covers every Scottish council area, ZE3 included. Longer journeys are planned so each job is done in one go if at all possible. ZE3 includes coastal places, where facades, frames and external slabs take more weather than inland. We take that exposure into account when choosing the product.
Hestingott: For any commercial premises in Hestingott, a lasting joint depends on full removal of the old sealant and clean, dry faces. Colour matters on frontages and fit-outs, so the quote confirms which colours the chosen product comes in.
Commercial clients in ZE3
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Common problems we fix in ZE3
When a bead peels cleanly off one face, it has failed in adhesion. Typical reasons include rushed preparation, no primer where one was needed, dust or release agents on the surface, or three-sided adhesion. We see it often where joints were sealed in a hurry.
Common reasons buildings call us in:
- Water staining near frames, panels or ceilings
- Messy, uneven beads from earlier work that let the building down
- A top-up bead over failed sealant, now lifting
- External beads that have gone brittle and cracked
After the work
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Note dates and locations of sealant work for future planning
- Report cracked or peeling sealant early
- Put external and wet-area joints on a regular inspection round
- Brief cleaning contractors to avoid scourers and blades on sealant
Good ventilation keeps wet-area sealant in better condition. Fans that are broken or switched off leave joints damp for longer, and mould follows damp. Your maintenance team can look at extract fans at the same time.
In kitchens and washrooms, a failed joint is a cleaning problem as well as a leak risk. Cleanability is something environmental health officers pay attention to.
Different surfaces, different methods
Commercial kitchens and tea points
Gaps and ragged beads trap dirt that cleaning can’t reach, which matters when environmental health officers look at a kitchen. Work is timed around the hours you give us so the kitchen isn’t out of use longer than needed.
Facade and cladding joints
Facade joints move every day as panels warm and cool. They need a sealant with the right movement capability, laid at the right depth. We confirm the access in place before we quote.
How the quote is worked out
There’s no standard rate for sealant work, because every site is different. What we look at:
- The site’s rules and procedures
- How much existing material needs removing
- Travel to remote or island sites
- Phasing around occupants
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- Anything awkward about access or site hours
- Where the site is, with the postcode
- Whether an asbestos survey exists
- When you need the work done
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
ZE3: questions and answers
How is commercial sealant work priced?
Start with whatever information is to hand. We follow up with questions or a visit where needed.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Can weather delay the job?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Do you work for facilities managers and managing agents?
Yes. FMs, managing agents and landlords are among our regular clients. We can work to your instruction process and site rules.
Can you work to our specification?
Yes. Send it with your enquiry, and the quote will be based on it.
Is it OK to apply fresh sealant over existing beads?
Removal comes first, every time. After that come cleaning, primer where needed, backing and the new sealant.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards.