Coloured Sealant contractors in Brae
Coloured sealant for Brae, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Weathered sealant that no longer matches
- Failed coloured sealant that has split or peeled
- Smeared sealant on stone or joinery
Need coloured sealant in Brae?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Coloured sealant for commercial buildings in Brae
In retail, hospitality and office fit-outs, joints are seen close up every day. A mismatched bead can make good joinery look unfinished, even when the seal is sound. The aim is a colour from the product’s range that disappears into the surface. We work on hotel bathrooms and public areas, natural stone and brick and office fit-out finishes, and what we are called in for most is colour changes after a rebrand or refit and coloured joints that have cracked with movement. Whoever orders the work in Brae, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In smaller Scottish places like Brae, commercial buildings are often hotels, pubs, shops, schools, surgeries and farm or estate buildings put to new use. Their kitchens, washrooms and window perimeters all need joints that keep water out.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Brae (ZE2)
- Region
- Shetland Islands
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Coloured sealant around Brae: what changes locally
Brae lies within about 1 mile of the sea. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. We choose a product rated for the exposure, then confirm the colours available for it. Being in the east of Scotland, Brae gets less rain than the west coast. Cold, frosty mornings and condensation on steel and glass can still delay outside work.
Whatever the building in Brae, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material. A hotel such as The Brae Hotel Shetland (to the south of Brae) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Brae is in the Shetland Islands. We cover commercial sites throughout Brae, for single jobs and planned programmes alike. Our the Shetland Islands coverage takes in 63 places, large and small.
Postcode districts covered here: ZE2 for colour-matched joints. We cover commercial and managed buildings on Runafirth, Ladieside and Hevdaland and the roads nearby. Close to Brae, our area also takes in Sullom (3 miles north), Scatsta (3 miles north-east), Voe (4 miles south-east), Firth (6 miles north-east) and Hogaland (7 miles north). Brae ranks among the main centres of the Shetland Islands, with offices, shops, schools and other public and commercial buildings. Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
Local landmarks in Brae
For a walk, there’s Houlls Water.
Building owners, agents and FMs in Brae
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
We work for building owners and managing agents on everything from one building to a spread of sites around Brae. Several sites can go on one quote, which keeps the paperwork simple.
Diagnose, treat, sign off
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Where we can, we combine work around Brae with other jobs nearby. Tell us how flexible your dates are.
- The sealant type is chosen for the joint first, then the colour.
- Colour references, samples or photographs of the finish are checked against the product’s range.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We remove the existing bead, clean the faces and set the depth.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Before we start on site
- For older buildings, check the asbestos register before work
- Tell us what induction or permit system the site runs
- Let building users know which areas are affected
Get a fixed quote
To get a fixed quote, call 01277 525 020 or email us, telling us the site location and the nature of the job. You can also send details through our quote form.
Advice
Cost factors for colour-matched joints
There’s no standard rate for sealant work, because every site is different. What we look at:
- Site requirements such as inductions and permits
- Joint width, depth and condition
- Travel to remote or island sites
- How accessible the joints are
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Sending details for a quote
To price the job accurately, we need to understand the site. Send us:
- What the building is and how it’s used
- The asbestos register, for older buildings
- A wide shot and a close-up of the area
- The postcode of the building
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- Keep the same sealant colour across a brand
- Protect fresh coloured sealant from dust and handling
- Insist on the agreed colour for any repair
- Keep harsh solvents away from visible joints
Clean coloured joints with mild, non-abrasive products. Harsh chemicals and scouring can change how the colour looks over time.
Put the sealant colour into the specification or finishes schedule. When colour is left to the last minute, it is often wrong, so agree it with the designer at the start.
Different surfaces, different methods
Shop-fit and joinery finishes
Counters, display units and wall linings are seen close up. Clean masking and neat tooling matter as much as colour.
Cladding panels
Cladding joints are often seen across a whole elevation. The colour is picked from the range of a sealant that suits the panel joint, suited to the expected movement.
Your questions answered
Must a hotel around Brae close while you work?
Almost never. The work is phased so most rooms stay available. The plan is built around your bookings.
Will you travel to Brae on the island?
Yes. Islands are part of our area, Brae included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Does coloured sealant change colour outdoors?
Some change is normal outdoors. UV and grime can soften or alter the colour, and resealing brings the look back.
Does the colour affect how the joint performs?
The product type decides performance, not the colour. The joint gets the product it needs, in a colour from that product’s range, installed in exactly the same way.
Can we specify the colour by RAL number?
Yes. We compare the RAL reference with the colours made for the specified sealant. We will tell you which colour is closest before work starts.
Can coloured sealant be used in washrooms and kitchens?
Yes, where the product range allows. Coloured sanitary sealant suits tiled and stone wet areas.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
When something else is needed
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. It won’t fix:
- Finishes that change colour from one area to another
- Paintable products in joints they aren’t suited to
- Stopping sealant from ever changing colour outdoors
If you are not sure, just speak to us on 01277 525 020 or email us and we will give you a straight answer before you book.
What we seal
- Natural stone and brick
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Office fit-out finishes
- Cladding panels
- Shop-fit joinery and counters