Sealant specialists in Vidlin
Our CSCS-carded applicators take on sealant work for offices, shops, hotels and other commercial buildings in Vidlin and the surrounding area. Send photographs or drawings for a fixed quote.
- Untidy joints in a reception, shop floor or lobby
- Mouldy silicone around WCs, urinals and vanity tops
- External beads that have gone brittle and cracked
Commercial sealant contractors for businesses in Vidlin
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our commercial sealant contractors in Vidlin
Most commercial buildings carry hundreds of metres of sealant that nobody thinks about until it fails, and in an occupied building failure usually announces itself as a stained ceiling or an unhappy tenant. Mastic Doctor works as a commercial sealant contractor for facilities managers, managing agents and main contractors. Our job is to diagnose the failure, remove the old bead and seal again using a product chosen for the movement and exposure. We work on external facade joints, window and door perimeters and kitchen worktops and splashbacks, and what we are called in for most is gaps behind commercial kitchen worktops and sinks and a top-up bead over failed sealant, now lifting. Searching for sealant specialists in Vidlin? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Quotes for commercial sealant in Vidlin can come from photos and a joint schedule, or from a walk-round, with the scope listed so everyone knows what’s included.
In smaller Scottish places like Vidlin, commercial buildings are often hotels, pubs, shops, schools, surgeries and farm or estate buildings put to new use. Each has kitchens, washrooms and frames that depend on sound joints.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Location
- Vidlin (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
General trades versus a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.
How the job changes by surface
Facade and cladding joints
On a facade, a failed joint is often only visible close up. Photos from a closer viewpoint help us price, with colours confirmed for the product chosen.
Movement joints in walls and floors
Brickwork, blockwork and floor slabs all have movement joints that need a flexible seal. Failed seals let grit and water in, and the edges start to suffer. The joints are resealed using a sealant matched to the movement and any traffic.
What sealant work can’t fix
Being straight saves everyone time. New sealant won’t cure:
- Broken glass or blown double-glazed units
- Suspect materials that need testing and specialist removal
- Water from a services leak rather than a joint
If you are not sure, just call 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
Where we work in Vidlin
- Movement joints in walls and floors
- Window and door perimeters
- Kitchen worktops and splashbacks
- Floor and threshold joints
- External facade joints
- Washrooms and tea points
Our process
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then handed back before the next one starts. Tell us who will meet us and how to get in at your building near Vidlin. That goes into the plan alongside the quote.
- Send details through our quote form, or ask for a site visit.
- The cause is diagnosed and the scope priced as a fixed quote.
- Where parts of the building must stay open, the work is phased.
- Old sealant is cut out completely, never sealed over.
- Each joint gets a suitable sealant, laid to depth and tooled.
- We check the work with you, and the 12-month guarantee starts.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Point out parking and an unloading spot
- Clear stock, furniture or equipment away from the joints
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, phone 01277 525 020 or send photos by email.
Related advice
What else we do in Vidlin
Common questions from Vidlin clients
Can the sealant on our Vidlin premises match the finishes?
Yes, we can typically get close to most finishes from the product’s colour range. The quote lists the colours the product is made in.
Will you travel to Vidlin on the island?
Yes, Vidlin is within the area we cover. Every Scottish council area is within our area. Ferry times and the weather set the plan, so we ask for photos and a full list first.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Is your work guaranteed?
Our workmanship on each job is backed by a 12-month guarantee. Public liability insurance is in place too.
How do we get a quote?
Price depends on joint lengths and widths, how much removal is involved, the product, access and phasing. To get a fixed price, send details through our quote form, or phone or email us.
Do you check for asbestos before removing sealant?
It can, on some older buildings. That’s why we ask for the asbestos information first, and stop if a material is suspect until it’s tested.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
What happens if it’s left?
On many buildings the mastic was done by whichever trade was on site. Choosing the product, setting the depth and preparing the faces are what a specialist brings, and they’re where most failures begin. It shows over the following seasons rather than at handover. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Vidlin before they leak.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Why clients in Vidlin choose us
- Constructionline member for supplier checks
- Coloured sealants to suit the setting, where available
- Colour agreed before work starts
- One number for every site we cover
Take a look at our cost guide or our accreditations and insurance.
Commercial premises in Vidlin
The sea is no more than about 1 mile from Vidlin. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. A matched colour is only half the brief on an exposed frontage. Vidlin is on Scotland’s drier eastern side. Winter frost and damp frames still stop outside sealing on some days.
A lasting commercial joint around Vidlin begins with the old bead fully out and the faces clean and dry.
Vidlin is in the Shetland Islands. Businesses, contractors and managing agents in Vidlin use us for work on sealant joints, as part of our coverage of the Shetland Islands. Our the Shetland Islands coverage takes in 63 places.
Anyone looking for commercial sealant contractors in ZE2 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Sites close to Vidlin are covered too, including Dury (4 miles south), Hamister (4 miles east), Voe (4 miles west), Symbister (4 miles south-east) and Sandwick (4 miles south-east). Where a site is remote or on an island, we plan travel and materials carefully.
Around Vidlin
A little further out are The Cabin Museum (1.5 miles south-west). Not far away are Kirkhouse Loch and Setter Hill.
When to call us in Vidlin
External sealant takes a steady beating from the weather. UV hardens the surface while wind and rain work at the edges; in time the surface chalks, hardens and cracks. Once it stiffens, the joint opens up at the next big temperature swing.
What tends to prompt an enquiry:
- Expansion joints with the sealant torn out
- Frame sealant that has cracked, shrunk or pulled away
- Weathered facade sealant that no longer flexes
- Mouldy silicone around WCs, urinals and vanity tops
For premises around Vidlin where the joint is seen, colour options for the product are confirmed with the quote.
Questions to ask before you book
- How the existing material will be dealt with
- What site paperwork they can supply
- What level of public liability insurance do they hold?
- How they’ll work around occupants