Floor Joint Sealing in Gunnista
Planning work on a floor joint in Gunnista? We assess it, carry out the work and guarantee our workmanship for 12 months.
- A gap opening alongside old joint filler
- Dock area joints that have failed first
- Scruffy, dirty joint lines on a shop or showroom floor
Floor joint sealing for Gunnista sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle floor joint sealing in Gunnista
Across Gunnista and the rest of the Shetland Islands, it runs the same way: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. Approximate joint lengths, a few photos and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. We work on retail and showroom floors, joints along racking aisles and saw-cut induced joints, and the usual reasons a site gets in touch are loading bay joints breaking down and unfilled floor joints collecting dirt and grit. A specialist sealant contractor works differently from a general builder: on jobs in Gunnista, preparation and product choice get the time they need.
Travel to smaller places like Gunnista is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Gunnista (ZE2)
- Wider area
- Shetland Islands
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
- Structural cracking in the slab
- Damaged or worn floor coatings and screeds
If in doubt, give us a call on 01277 525 020 or send photos by email and we will say what we think before you book.
Surfaces we seal
- Loading bays
- Construction joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Retail and showroom floors
- Saw-cut induced joints
Gunnista: questions and answers
Would you work within a site like Montfield Hospital?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Will you travel to Gunnista on the island?
Yes, Gunnista is within the area we cover. Every Scottish council area is within our area. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Do you use semi-rigid filler or flexible sealant on floor joints?
There isn’t one answer for a whole floor. Where hard wheels cross, a semi-rigid filler is typically right, and movement joints or perimeters need something flexible. You will see the choice for each area in the quote.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and we will price the work to it.
Do you guarantee industrial floor joints?
Every job has our 12-month guarantee. It covers our workmanship, not later slab movement or damage from impacts.
Maintenance after handover
For the best life from the joints:
- Sweep debris out of open joints until they can be filled
- Expect fillers on young slabs to need a top-up
- Record damaged joints with a photo and a location
- Remind operators to lift rather than drag
Problems inside the 12-month guarantee period are ours to put right. Beyond that, an inspection once or twice a year catches failing joints early.
Every vehicle on a busy aisle hits a damaged joint. Sorting it early looks after your equipment as well as the slab.
Surface by surface
Forklift and pallet-truck routes
Trucks running over open joints wear wheels and shake loads. Filling them gives a smoother run and saves the edges.
Isolation joints at walls and columns
We plan column and wall joints around racking and fixed plant.
Floor joint sealing in Gunnista: the local picture
Gunnista lies within about 1 mile of the sea. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, which is why split joints are worth sealing before the edges deteriorate. At least three named trading, business or retail sites lie within about 3 miles of Gunnista. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Schools such as Anderson High School have movement joints in their walls and floors that are easy to overlook. Another example is North Gremista Industrial Estate, 2 miles to the west of Gunnista, where floors and yards would be done in stages around the occupiers.
Gunnista is in the Shetland Islands. Commercial clients in Gunnista can call on us for floor joints. Gunnista is one of 63 places we cover in the Shetland Islands for floor joints.
We take on floor joints across the ZE2 postcode area, whatever the building. Just outside Gunnista, we also work in Heogan (1 mile west), Gremista (2 miles west), Grindiscol (2 miles south), Lerwick (2 miles south-west) and Sound (3 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you give us a call on 01277 525 020 or send details through our quote form.
Around Gunnista
Well-known places in the area include Shetland Museum (2 miles south-west) and Montfield Hospital (2.2 miles south-west). Green spaces nearby include Loch of Aith.
Other services in Gunnista
When to call us in Gunnista
A soft, flexible sealant on a forklift route can’t hold the arrises up and the edges fail regardless. It can go the other way too: a stiff filler in a joint that keeps moving splits or comes away from the sides.
Look out for the following:
- Filler that has parted from one face
- Soft sealant dragged out of trafficked joints
- Brittle joint filler breaking up
- Broken arrises where pallet trucks cross
Hospital campuses such as Montfield Hospital, 2.2 miles south-west of Gunnista, grow in stages, leaving movement joints wherever new blocks meet old.
What to look for in a quote
- Their plan for phasing and protecting the area
- Are they CHAS accredited or on Constructionline?
- Will RAMS and insurance details be available?
- The terms of the workmanship guarantee
When to bring in a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
From enquiry to sign-off
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking a day or more, depending on the metres of joint and how many zones the floor is split into. For work around Gunnista, we aim for one trip, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Getting the site ready
- Agree which areas must stay open
- Make sure the joints can be reached
- Have the specification and drawings to hand
Quotes
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or send photos by email.