Industrial and floor joint sealing in Sandwick, Shetland Islands
Floor joint sealing in Sandwick, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Filler that has parted from one face
- Soft sealant dragged out of trafficked joints
- A rough ride across broken joints
Floor joint sealing in Sandwick
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Sandwick
We diagnose the floor first rather than guessing at a product: how wide the joints are, signs of ongoing movement, the wheel types crossing them and the state of the arrises. From that we choose between a semi-rigid filler and a more flexible sealant and the answer can differ from one zone to the next. The enquiries we see most involve a gap opening alongside old joint filler and trucks and loads jolting over damaged joints, on forklift and pallet-truck routes, saw-cut induced joints and retail and showroom floors. For commercial sealant work in Sandwick, you deal with one contact from quote to sign-off, whether it’s one building or several.
Travel to smaller places like Sandwick is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Place
- Sandwick (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
FAQs: Sandwick
Is Sandwick inside the area you cover, given it’s on an island?
Yes. We cover the whole of Scotland, and that includes island locations such as Sandwick. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
Can being near the sea in Sandwick affect the sealant we need?
It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Is it normal for joint filler to separate?
On newer slabs, the concrete keeps shrinking after the joints are filled and a stiff filler can separate down one side. A top-up normally puts it right.
What do you need from us to quote?
A rough joint length, a few photographs and a site plan are usually enough for a quick quote. For larger floors, a site visit is often best so speak to us on 01277 525 020 or email the details over to set one up.
For managing agents and facilities managers
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Sandwick can sit alongside others in a wider programme.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Floor joint sealing in Sandwick: the local picture
Sandwick is within about 1 mile of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. Island jobs, Sandwick among them, are planned around the ferry and the forecast. Joint widths, lengths and the traffic over them help us bring the right fillers and sealants.
A joint near Sandwick that has lost its sealant lets in water and grit, and the edges suffer next.
Sandwick is about 14 miles north of Lerwick, in the Shetland Islands. Looking for floor joint sealing in Sandwick? We can help. Across the Shetland Islands, 63 places are covered, Sandwick among them.
Commercial sites across ZE2 are covered for floor joints. For a building on Rocky Road, Saeter and Harlsdale or nearby, we can quote for floor joints. Nearby places we also cover include Clate (1 mile south), Symbister (1 mile north-east), Hamister (1 mile north), Huxter (1 mile east) and Tripwell (2 miles north-east) for floor joints. Nearby towns on our patch include Lerwick (14 miles south), Sound (14 miles south) and Brae (12 miles west). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
Near you in Sandwick
Open spaces near Sandwick include Ward of Clett and Loch of Sandwick.
Do you need floor joint sealing in Sandwick?
Oil, laitance, dust and old cleaning chemicals build up inside joints. Without cutting back to sound, clean concrete, the new material simply lifts out.
Most enquiries start with one or more of the following:
- Grimy joint lines spoiling a showroom floor
- Chipped and spalling edges along forklift routes
- Trucks and loads jolting over damaged joints
- Flexible sealant torn out by wheels
In and around Sandwick, the right filler or sealant for each joint depends on the traffic and the movement it takes.
What to look for in a quote
- Is the sealant right for the movement and the substrate?
- How they’ll work around occupants
- Their public liability cover
- Do they follow the manufacturer’s priming guidance?
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
When it isn’t the sealant
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Spalled arrises, which need an edge repair first
- Unstable slabs moving under traffic
- Worn screed or surface finishes
If you’re not sure, just ring 01277 525 020 or email us and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Retail and showroom floors
- Loading bays
- Construction joints
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Joints along racking aisles
Diagnose, treat, sign off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. For a building near Sandwick, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Before we start on site
- Point out any areas we must not close
- Warn occupants and staff about the work
- For older buildings, check the asbestos register before work
Request a quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or email a schedule or drawings to discuss it first.
Related advice
How the job changes by surface
Flexible floor sealants
Flexible floor sealants come in several colours so ask if the colour matters.
Isolation joints at walls and columns
Joints around columns and along walls let the slab move without cracking against the structure. A flexible product suits them better than a stiff filler.