Industrial and floor joint sealing in Brough, Shetland Islands
Planning work on a floor joint in Brough? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- A gap opening alongside old joint filler
- Flexible sealant torn out by wheels
- Drivers complaining about joints on a route
Floor joint sealing near Brough
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Brough, done properly
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. If you’re dealing with chipped and spalling edges along forklift routes and soft sealant dragged out of trafficked joints, we can help, whatever the surface. Facilities teams, main contractors and managing agents in Brough tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For outside joints near Brough, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range. Inside slabs aren’t affected and can be scheduled around the occupier.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Place
- Brough (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Keeping the joints sound
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Respect the cure time before traffic returns
- Check joint lines on busy aisles regularly
- Photograph any joint that starts to chip
- Put loading bays at the top of the list
Dragged forks and pallets gouge joints and edges alike. Steel tines will mark a good joint over time if it keeps happening.
Treating joints while the arrises are sound keeps the work simple. After the edges go, repairs come into it, with more downtime and more disruption.
Surface by surface
Retail and showroom floors
Shop and showroom floors often have exposed slab joints, especially with polished or coated concrete. A flush, neat fill in a suitable colour keeps the floor looking right and confirm which colours the product comes in.
Flexible floor sealants
A flexible sealant suits perimeter and movement joints away from the heaviest traffic. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Diagnose, treat, sign off
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. For work around Brough, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- You get a time for each zone to reopen.
What we need from you
- Agree which areas must stay open
- Move anything stored against the joints
- Send asbestos survey details if the building is pre-2000
Quotes
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, give us a call on 01277 525 020 or email drawings and photos.
Read more
How the quote is worked out
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- Phasing around occupants
- Joint width, depth and condition
- Site requirements such as inductions and permits
- Specialist products, such as fire-rated or hygienic sealants
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Sending details for a quote
A few photos plus some basic facts will normally do. Please tell us:
- Clear photos of the problem areas
- Access details, including height
- Any dates the work must fit around
- The asbestos register, for older buildings
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or email a schedule or drawings.
More services for Brough
Leave it or put it right?
Some runs only need partial renewal or topping up. Where existing filler is well bonded and the gap beside it is small, a full strip-out isn’t always needed, and we’ll say which joints need what. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
Why clients in Brough choose us
- Workmanship guaranteed for 12 months
- A Constructionline member, so easy to vet
- Fully insured, including public liability cover
- One phone line for London, the South East and Scotland
Questions about Brough
Do you work on the island where Brough is?
Yes. Islands are part of our area, Brough included. We group island work where we can and plan around the crossings.
Does a site in Brough have to shut while its joints are sealed?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we’ll plan from there.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Is colour matching possible?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
What information helps you price floor joint sealing?
A rough joint length, a few photos and a site plan are usually enough for a quick quote. We can visit where that helps so phone 01277 525 020 or email drawings and photos to set one up.
Floor joint sealing around Brough: how the place shapes the job
The sea is no more than about 1 mile from Brough. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so it pays to keep them sealed. For an island location such as Brough, work is planned around ferry crossings and the weather. Approximate joint lengths and widths let us bring enough material first time.
For floors and slabs around Brough, the product is chosen for the traffic and the movement at each joint. A joint near Brough that has lost its sealant lets in water and grit, and the edges suffer next.
Brough is in the Shetland Islands. Looking for floor joint sealing in Brough? We can help. Our the Shetland Islands coverage takes in 63 places.
Work on floor joints is covered throughout ZE2. Streets here include Houll and Tripwell. Just outside Brough, we also work in Tripwell (1 mile south-west), Hamister (1 mile south-west), Huxter (2 miles south), Symbister (2 miles south-west) and Sandwick (2 miles south-west). For island and remote sites, travel and materials need planning ahead.
What’s near Brough
Green spaces nearby include Setter Hill and Loch of Houll.
Building owners, agents and FMs in Brough
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.