Industrial and floor joint sealing in Pilrig, Edinburgh
Floor joint sealing and filling in warehouses, factories and industrial units throughout Pilrig and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Saw-cut joints left open and packed with grit
- Grimy joint lines spoiling a showroom floor
- Joint edges breaking up under truck wheels
Floor joint sealing in Pilrig
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle floor joint sealing in Pilrig
We diagnose the floor first rather than guessing at a product: how wide the joints are, signs of ongoing movement, the wheel types crossing them and the state of the arrises. That tells us whether semi-rigid filler or flexible sealant suits each run and the answer can differ from one zone to the next. We work on construction joints, loading bays and joints along racking aisles, and what we’re called in for most is loading bay joints breaking down and soft sealant dragged out of trafficked joints. For commercial sealant work in Pilrig, you deal with one contact from quote to sign-off, whether it’s one building or several.
In Scotland’s cities, buildings from car parks and malls to university and hospital estates rely on movement joints. When the sealant goes, water and grit get in, and a Scottish winter makes it worse.
A 12-month guarantee applies to all our work. If an installation problem shows up, speak to us on 01277 525 020 or send photos by email and we will arrange a return visit.
- Place
- Pilrig (EH6, EH7, EH1)
- Wider area
- Edinburgh
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Plan for a top-up on newer floors
- Treat loading bay joints first if they’re failing
- Ask drivers not to drag forks or pallets
- Keep grit out of unfilled joints in the meantime
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
A broken joint on a main route is crossed by every truck on that route. Sorting it early looks after your equipment as well as the slab.
Floors, slabs and movement joints in Pilrig
Pilrig is within about 1 mile of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. At least three named trading, business or retail sites lie within about 3 miles of Pilrig. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
At places like Bonnington Business Centre, which lies north of Pilrig, joints are sealed a section at a time so operations carry on. For estates staff at a university like University of Edinburgh - Holyrood Campus (1 mile south of Pilrig), building and paving joints are part of the planned maintenance list.
Pilrig is about 2 miles north-east of Edinburgh, in Edinburgh. Our applicators travel to Pilrig for work on floor joints, handled exactly as we handle every other area. Across Edinburgh, 174 places are covered, including Pilrig.
Commercial sites across EH6, EH7 and EH1 are covered. If your site is on Fyfe Lane, Haig Lane and Easter Road or close by, send details and we’ll quote for floor joints. Main routes into Pilrig include the A900, which helps when planning parking and deliveries for the job. Sites close to Pilrig are covered too, including Bonnington (1 mile north), Gayfield (1 mile south-west), Powderhall (1 mile west), Greenside (1 mile south) and Broughton (1 mile south-west). A short drive away, we cover Queensferry (9 miles west), South Portobello (3 miles south-east), Southhouse (5 miles south), Gilmerton (5 miles south-east), Shandon (3 miles south-west) and Muirhouse (3 miles west).
Around Pilrig
In Pilrig, that means premises near 23 Elm Row and 2 Montgomery Street pub, McDonald Road Library and Taylor Gardens and the streets around them. Also close by are London Street Primary School (0.5 miles south-west) and Drummond Community High School (0.5 miles south-west). Pilrig’s nearest station is Edinburgh Waverley station, roughly 1 mile south-west of the centre. Well-known places in the area include St. James Centre (0.8 miles south-west) and Leith Community Treatment Centre (0.5 miles north). Open spaces near Pilrig include Dunsapie Loch and Salisbury Crags.
Site staff or a sealant specialist?
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Also near Pilrig
Other services in Pilrig
What the job involves on each surface
Retail and showroom floors
We plan shop-floor work so trading can continue. Give us your opening pattern and access windows and the phasing follows.
Semi-rigid joint fillers
A semi-rigid fill can separate along one side while a slab is still shrinking. A later top-up usually puts that right and we’ll flag it at quote stage.
Diagnose, treat, sign off
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we’ll work to them.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- We fill the joints with the agreed product, finished level.
- You get a time for each zone to reopen.
Before we start on site
- Share your working hours and any access restrictions
- Tell us which areas need to stay in use
- Make sure the joints can be reached
Ask for a quote
To get a fixed quote, ring 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. You can also send details through our quote form.
Read more
Your questions answered
Do you take on work at healthcare sites like Western General Hospital (Edinburgh)?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Do you cover business parks and estates near Pilrig, such as Jane Street Industrial Estate?
Yes, sites like Jane Street Industrial Estate are within our area, along with the rest of Pilrig. Send details of the unit and the work through our quote form for a quick quote.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
For managing agents and facilities managers
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Pilrig can sit alongside others in a wider programme across Edinburgh.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Common problems we fix in Pilrig
Floor joints collect dust, oil, curing compound and cleaning residue. Without cutting back to sound, clean concrete the new filler can’t stay bonded.
Typical triggers for a call:
- Broken arrises where pallet trucks cross
- Loading bay joints breaking down
- Grimy joint lines spoiling a showroom floor
- Joint fill separating from the concrete
On industrial estates such as Jane Street Industrial Estate, which lies north of Pilrig, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
What your quote should include
- Their public liability cover
- Whether old or failed sealant will be cut out, not overlaid
- Whether their applicators hold CSCS cards
- Can the work be phased to keep areas open?