Floor Joint Sealing contractors in Ollaberry
Sealant work in Ollaberry for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Joint fill separating from the concrete
- A rough ride across broken joints
- Loading bay joints breaking down
Need floor joint sealing in Ollaberry?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
What happens if it’s left?
Duct tape or a general builders’ sealant can seem to buy some time. Neither is made to carry wheels, and it normally ends up dragged across the floor. The right filler or sealant saves doing it twice. Renewing every failing joint on one visit is the sensible approach for a place like Ollaberry. Send photos and we’ll quote for everything together.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why choose Mastic Doctor in Ollaberry
- Health and safety: CHAS accredited
- Fixed quotes based on photos, drawings or a visit
- Old sealant cut out, never sealed over
- Our applicators hold CSCS cards
Take a look at our cost guide or our accreditations.
Floor joint sealing for commercial buildings in Ollaberry
Sometimes the concrete either side of a joint has already spalled. Filling against a crumbled arris won’t hold for long, so we’ll tell you if the joint edges need repairing first and explain how it affects the programme. We work on saw-cut induced joints, forklift and pallet-truck routes and retail and showroom floors, and the failures we are asked to look at most are joint edges breaking up under truck wheels and cracked and crumbling joint fill. Looking for mastic applicators who cover Ollaberry? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
For floor or movement joints around smaller places like Ollaberry, we plan to finish in one visit where we can. Photos, approximate widths and what uses the floor help us bring the right materials.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Ollaberry (ZE2)
- Region
- Shetland Islands
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Floor joint sealing around Ollaberry: how the place shapes the job
Ollaberry sits close to the coast, within about 1 mile. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, and edges left open tend to break up faster. Being on an island, Ollaberry means planning around ferry times as well as the weather. Joint widths, lengths and the traffic over them help us bring the right fillers and sealants.
In and around Ollaberry, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Ollaberry is in the Shetland Islands. We send applicators to Ollaberry for floor joints, handled exactly as we handle every other area. Ollaberry is one of 63 places we cover in the Shetland Islands.
If you need floor joint sealing in ZE2, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Just outside Ollaberry, we also work in Hogaland (1 mile south-west), Urafirth (4 miles west), Sullom (5 miles south), Hillswick (5 miles west) and Scatsta (5 miles south). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you phone 01277 525 020 or send details through our quote form.
What’s near Ollaberry
For a walk, there’s Burgan Loch and Hill of Skea.
Owners, agents and contractors
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Questions we’re asked in Ollaberry
Can you take on a job in Ollaberry, on the island?
Yes. Every Scottish council area is within our area, and that includes island locations such as Ollaberry. We group island work where we can and plan around the crossings.
Our building in Ollaberry is near the coast: does that change the sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Is it normal for joint filler to separate?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. It is usually dealt with by topping up.
Do you guarantee industrial floor joints?
There is a 12-month guarantee on our workmanship and the work is covered by public liability insurance.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Diagnose, treat, sign off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before the next one starts. For work around Ollaberry, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
What we need from you
- Arrange parking or a loading space
- Tell us what induction or permit system the site runs
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, ring 01277 525 020 or email the details over.
Related advice
Do you need floor joint sealing in Ollaberry?
An ageing filler or sealant can go brittle and split especially under daily scrubbing and traffic. Once it has gone hard or come loose, it protects nothing.
It’s worth sending us details if you spot any of the following:
- Broken arrises where pallet trucks cross
- Untidy open joints in a retail unit
- Loading bay joints breaking down
- Flexible sealant torn out by wheels
A joint near Ollaberry that has lost its sealant lets in water and grit, and the edges suffer next; we will tell you if the edges need repairing first.
Questions to ask before you book
- Will failed sealant be removed rather than covered?
- Health and safety accreditation such as CHAS
- What the guarantee covers, and for how long
- Proof of insurance
Other services in Ollaberry
Maintenance after handover
Once the work is signed off, a little attention goes a long way:
- Let us know what the floor is cleaned with
- Expect fillers on young slabs to need a top-up
- Record damaged joints with a photo and a location
- Sweep debris out of open joints until they can be filled
On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. That is common and is typically dealt with by topping up once the slab has settled down in the majority of cases.
Every vehicle on a busy aisle hits a damaged joint. Early treatment protects wheels, loads and drivers as much as the floor.