The Mastic Doctor team standing beside their branded vans outside an office building
Shetland Islands · Scotland

Mastic contractors in Ollaberry

Mastic packages for new-build and refurbishment projects in Ollaberry. CHAS accredited and fully insured, with a 12-month guarantee.

  • Oversized or tapered gaps around new frames
  • Window and door perimeters that won’t pass inspection
  • Early adhesion failures on new external joints
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
Constructionline member
£5m public liability

Need construction mastic in Ollaberry?

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Mastic packages on Ollaberry sites

With the shore within about 1 mile, Ollaberry counts as a coastal location. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, so joint design, primers and product choice deserve extra care. Ollaberry is in the east of Scotland, which is drier than the west. Winter mornings can still bring frost and condensation on steel and glass. We programme around it with the site team.

Window perimeters and facade joints around Ollaberry need correct width, depth and backing rod as much as a neat finish. For contractors building in or near Ollaberry, we seal to the drawings, the specification and the programme.

Ollaberry is in the Shetland Islands. Ollaberry sits inside our coverage and the rest of the Shetland Islands, with the same fixed quotes and 12-month guarantee as everywhere else. Ollaberry is one of 63 places in the Shetland Islands on our list.

If you need construction mastic in ZE2, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Just outside Ollaberry, we also work in Hogaland (1 mile south-west), Urafirth (4 miles west), Sullom (5 miles south), Hillswick (5 miles west) and Scatsta (5 miles south). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you ring 01277 525 020 or email us.

Near you in Ollaberry

For a walk, there’s Burgan Loch and Hill of Skea.

Map of Ollaberry © OpenStreetMap contributors

About our construction mastic in Ollaberry

External mastic depends on the weather in a way most internal trades don’t. Each sealant has a temperature range, and damp, frost or condensation on frames stops work so it helps to sequence elevations with some flexibility. Internal areas can typically carry on while the outside waits. If you’re dealing with snag items on joints that need redoing before handover and old sealant on a refurbishment that needs stripping before new work, we can put it right, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Ollaberry is the same: the right product in a properly prepared joint.

Outside mastic in Scotland needs a dry, frost-clear joint, and in a place like Ollaberry that means watching the forecast. A little flexibility in the programme lets external joints go in on suitable days.

We stand by our work with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.

The Mastic Doctor team standing beside their branded vans outside an office building
Location
Ollaberry (ZE2)
Region
Shetland Islands
Cover
12 months on every job
Quotes
A fixed quote before we start
Call
01277 525 020
Last updated
3 November 2026

Your questions answered

Can you take on a job in Ollaberry, on the island?

Yes. Islands are part of our area, Ollaberry included. Ferry times and the weather set the plan, so we ask for photographs and a full list first.

Can the mastic package for our job in Ollaberry follow the site programme?

Yes, we work to the programme and the sequence the site sets. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.

When can you be on site?

Mention the site’s hours and access windows in your enquiry, and we will plan around them. Our office runs Monday to Friday, 8am until 5pm.

How long does a job like this take?

We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.

Can you work to our specification?

Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.

How do you work with the site programme?

We follow the trades through the building. Areas are sealed as they’re released by the site team and we tell you if something stops an area being sealed.

What accreditations do you hold?

We’re CHAS accredited and a Constructionline member, and our applicators hold CSCS cards. We’re fully insured for public liability.

What we can’t put right

Being straight saves everyone time. New sealant won’t cure:

  • Joints damaged after sign-off by following trades
  • Frame gaps too wide for sealant, which the installer needs to correct
  • Joint design decisions that belong to the architect or engineer

Not sure which it is? You can speak to us on 01277 525 020 or email the details over and we’ll tell you honestly.

Where we work in Ollaberry

  • Brick and block movement joints
  • Cladding and panel joints
  • Window and door perimeters
  • Sanitary and kitchen joints
  • Internal decorators’ caulk
  • Floor and skirting junctions

When to bring in a specialist

The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.

For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.

For managing agents and facilities managers

We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, which keeps the paperwork simple.

For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.

What happens if it’s left?

Clearing snags piecemeal is tempting when handover is close. A planned sweep of each plot or floor catches the lot in one go and saves applicators coming back again and again. We can run snagging as its own phase before handover. Around smaller places like Ollaberry, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.

Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.

Why clients in Ollaberry choose us

  • Joints cleaned back to sound surfaces
  • Clear, fixed quotes
  • CSCS-carded applicators
  • Coloured sealants to suit the setting, where available

Take a look at how commercial sealant jobs are priced and our accreditations and insurance.

From enquiry to sign-off

Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then handed back before the next one starts. For a building near Ollaberry, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.

  1. We start with the drawings, specification and programme.
  2. Quantities are measured and a fixed price returned.
  3. We agree with the site team which areas come first.
  4. Each area is sealed when it’s released.
  5. Every joint is cleaned, set to depth and sealed with the specified product.
  6. After snagging, the work is handed over under our 12-month guarantee.

What we need from you

  • Confirm the product named in the specification
  • Tell staff and tenants when we’ll be in
  • Make sure the joints can be reached

Request a quote

A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.

Get a price

Related advice

What sets the cost

What shapes the price:

  • Whether the work must be split into stages
  • Backing rod, priming and other preparation
  • Induction, permit and paperwork requirements
  • Specialist products, such as fire-rated or hygienic sealants

Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.

Before you send an enquiry

Diagnosis starts before we arrive. Tell us:

  • Asbestos survey details if the building is older
  • Specification clauses that apply
  • Your programme or deadline
  • Whether the building will be occupied during the work

Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.

Accreditations

Trusted. Accredited. Insured.