Fire Stopping in Ollaberry
Looking for fire stopping in Ollaberry? It’s simple: send details, get a quote, we seal, guaranteed.
- Unsealed openings around new pipes and cables
- Improvised or mixed-product fire seals
- Hidden openings found during inspections
Fire stopping for businesses in Ollaberry
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Ollaberry
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Ollaberry. We work on service gaps in risers, linear gaps at wall heads and small duct penetrations where the tested detail allows, and what we are called in for most is fire stopping installed outside its tested range and builders’ foam or ordinary silicone in compartment walls. Whether you call it commercial sealant work, mastic application or joint sealing, in Ollaberry it comes down to the same thing: the right product in a properly prepared joint.
In smaller Scottish places like Ollaberry, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Location
- Ollaberry (ZE2)
- Region
- Shetland Islands
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Keeping the joints sound
For the best life from the joints:
- Brief every trade that openings they make must be sealed
- Record which product was used where
- Leave fire sealant to cure fully before covering it
- Settle who seals which penetrations at the start of a project
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job; found late, it can be one of many.
What affects the price in Ollaberry
These are the things that shape the price:
- How accessible the joints are
- Whether old sealant has to be cut out first
- Whether the work must be split into stages
- How much there is to seal
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Before you send an enquiry
To price the job accurately, we need to understand the site. Useful things to include:
- How the joints are reached, and at what height
- Drawings or a marked-up plan, if available
- The product your specification calls for
- Photos of the joints, close up and from further back
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or email the details over if you’d rather talk the job through.
FAQs: Ollaberry
Is Ollaberry inside the area you cover, given it’s on an island?
Yes. Islands are part of our area, Ollaberry included. We group island work where we can and plan around the crossings.
How do Scotland’s building standards affect fire-rated sealant in Ollaberry?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Does the weather affect the work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
How long does a typical visit take?
That varies with the scale of the job, though a typical visit typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we’ll set out a timescale with the quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Surface by surface
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers and the installation has to fit inside those limits.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening, so the sealant and any backing sit properly.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Fire doors, dampers or other fire safety equipment
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Approving the work on behalf of building control
If you’re not sure, just call 01277 525 020 or use the quote form and we will give you a straight answer before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Joints between fire-resisting walls and floors
Building owners, agents and FMs in Ollaberry
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
How a job runs
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Travel to smaller Scottish places like Ollaberry is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Share the asbestos register for older buildings
- Tell us your opening times and when work is allowed
- Clear stock, furniture or equipment away from the joints
Get a fixed quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Advice
More services for Ollaberry
Fire stopping around Ollaberry: how the place shapes the job
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Being on an island, Ollaberry means planning around ferry times as well as the weather. With the specification and photos of the openings, the right fire-rated products travel with us.
Around Ollaberry, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product. For a building such as Ollaberry Church and Churchyard with Monument, new heating or data runs are the usual reason penetrations need sealing.
Ollaberry is in the Shetland Islands. Ollaberry sits inside our coverage and the rest of the Shetland Islands, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across the Shetland Islands, 63 places are covered, including Ollaberry.
We take on service penetrations across the ZE2 postcode area, for business premises of every kind. Sites close to Ollaberry are covered too, including Hogaland (1 mile south-west), Urafirth (4 miles west), Sullom (5 miles south), Hillswick (5 miles west) and Scatsta (5 miles south). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
What’s near Ollaberry
The countryside around Ollaberry includes Burgan Loch and Hill of Skea.