Industrial and floor joint sealing in Murrayfield, Edinburgh
Floor joint sealing for Murrayfield, from a contractor working since 2005. Fully insured and CHAS accredited.
- Old filler gone hard, cracked or loose
- Chipped and spalling edges along forklift routes
- Soft sealant dragged out of trafficked joints
Floor joint sealing near Murrayfield
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Murrayfield
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in, and the quote is fixed before we mobilise. If you have sealant pulled out along a truck route and a gap opening alongside old joint filler, we can put it right, whatever the surface. For commercial sealant work in Murrayfield, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
In Scotland’s cities, buildings from car parks and malls to university and hospital estates rely on movement joints. When the sealant goes, water and grit get in, and a Scottish winter makes it worse.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Location
- Murrayfield (EH12, EH4, EH11)
- Wider area
- Edinburgh
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Work for main contractors and building owners
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
When to call us in Murrayfield
Concrete slabs shrink as they dry out, and the saw cuts are there so it cracks in straight, controlled lines. As the panels contract, the joints widen, and a filler placed early can part company with one face.
Most enquiries start with one or more of the following:
- Dock area joints that have failed first
- Sealant pulled out along a truck route
- Untidy open joints in a retail unit
- Joint edges breaking up under truck wheels
Phasing is what makes joint work possible on busy sites such as Craigleith Retail Park (0.8 miles north of Murrayfield): one bay, aisle or car park row at a time.
What to look for in a quote
- What site paperwork they can supply
- How long is the guarantee, and what does it include?
- Health and safety accreditation such as CHAS
- How the joint faces will be prepared and primed
Slabs, ramps and loading bays in Murrayfield
Murrayfield sits close to the coast, within about 2 miles. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. Being in the east of Scotland, Murrayfield gets less rain than the west coast. Freezing weather and salt still attack open external joints. Autumn is a sensible time to seal them.
In a school such as The Mary Erskine School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Sites like Spire Murrayfield Hospital (to the west of Murrayfield) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Murrayfield is about 2 miles west of Edinburgh, in Edinburgh. We send applicators to Murrayfield for floor joints, handled exactly as we handle every other area. Across Edinburgh, 174 places are covered, including Murrayfield.
Postcode districts covered here: EH12, EH4 and EH11. If your site is on Baird Avenue, Ellersly Road and Campbell Road or close by, send details and we’ll quote for floor joints. Close to Murrayfield, our area also takes in Saughtonhall (1 mile south), Roseburn (1 mile east), Ravelston (1 mile north), Beechmount (1 mile south-west) and Balgreen (1 mile south-west). Bigger towns within reach include Leith (4 miles north-east), Bonnington (3 miles north-east), Pilrig (3 miles north-east), North Leith (3 miles north-east), Dumbiedykes (3 miles east) and Newington (3 miles east).
Local landmarks in Murrayfield
We work on buildings around St Columba's Parish Church, Gabrielle Keiller Library and Balgreen Primary School and the streets around them. Nearby too are St George's School (0.6 miles north-east), Saughton Park (0.8 miles south) and Roseburn Bar (0.5 miles east). Murrayfield’s nearest station is Haymarket station, roughly 1 mile east of the centre. Nearby you will also find Craigcrook Castle (1 mile north-west) and Murrayfield Experience (less than half a mile south). Not far away are The New Leaf Co-op and Dunsapie Loch.
FAQs: Murrayfield
Our building in Murrayfield is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Does your area include sites such as Russell Road Industrial Estate, near Murrayfield?
Yes, sites like Russell Road Industrial Estate are within our area, along with the rest of Murrayfield. Send details of the unit and the work through our quote form for a quick quote.
What do you need from us to quote?
A rough joint length, a few photographs and a site plan are typically enough for a quick quote. We can visit where that helps, and you can call 01277 525 020 or email us to arrange it.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is it normal for joint filler to separate?
On newer slabs, the concrete keeps shrinking after the joints are filled, so a semi-rigid filler can part from one face. A top-up normally puts it right.
Is the floor joint work guaranteed?
Every job has our 12-month guarantee. It covers our workmanship, not later slab movement or damage from impacts.
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking a day for smaller units, with bigger warehouse floors programmed over several visits. Work on a big city site in Scotland usually involves inductions and permits. Tell us the rules and we will work to them.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Preparing the site
- Explain the parking and delivery arrangements
- Tell us what induction or permit system the site runs
- Send asbestos survey details if the building is pre-2000
Quotes
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, call 01277 525 020 or email us.
Read more
Places near Murrayfield
More services for Murrayfield
After the work
Keep the joints in good shape with a few simple steps:
- Treat loading bay joints first if they’re failing
- Hold traffic back until the product has cured
- Ask drivers not to drag forks or pallets
- Sweep debris out of open joints until they can be filled
Problems inside the 12-month guarantee period are ours to put right. Beyond that, an inspection once or twice a year catches failing joints early.
Every vehicle on a busy aisle hits a damaged joint. Sorting it early looks after your equipment as well as the slab.
How the job changes by surface
Construction joints
Some construction joints have steel edge protection, others are plain concrete. We’ll tell you if the edges or any armouring look like they need attention before filling.
Loading bays and dock areas
At loading bays, product choice has to suit the loads, the temperature and the wet. Phasing is planned around your delivery schedule.
What affects the price in Murrayfield
Before we quote, we look at:
- Whether the work must be split into stages
- Joint width, depth and condition
- The product specified
- Removal of failed or old sealant
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Details that help us quote
To price the job accurately, we need to understand the site. Send us:
- Approximate linear metres or a joint schedule
- Whether an asbestos survey exists
- Where the site is, with the postcode
- Clear photographs of the problem areas
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.