The Mastic Doctor team standing beside their branded vans outside an office building
Perth and Kinross · Scotland

Kinloch floor joint sealing

Planning work on a floor joint in Kinloch? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Sealant pulled out along a truck route
  • Loading bay joints breaking down
  • Grimy joint lines spoiling a showroom floor
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
Covering the South East & Scotland
Constructionline member
£5m public liability

Floor joint sealing in Kinloch

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

What the job involves on each surface

Semi-rigid joint fillers

If a joint is still opening, a semi-rigid filler may part from one face. That is normally dealt with by topping up later and we will flag it at quote stage.

Isolation joints at walls and columns

We plan column and wall joints around racking and fixed plant so nothing has to move unexpectedly.

About our floor joint sealing in Kinloch

For sites in Kinloch and across Perth and Kinross, the process is short: send details, get a fixed quote, we seal, and the work is guaranteed. Approximate joint lengths, a few photos and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. We work on loading bays, forklift and pallet-truck routes and retail and showroom floors, and the usual reasons a site gets in touch are filler that has parted from one face and broken arrises where pallet trucks cross. Whether you call it commercial sealant work, mastic application or joint sealing, in Kinloch it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.

For outside joints near Kinloch, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range. Inside slabs aren’t affected and can be scheduled around the occupier.

Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.

Mastic Doctor team members lined up next to their branded vans outside an office building
Location
Kinloch (PH10)
Wider area
Perth and Kinross
Cover
12 months on every job
Quotes
Quoted before any work starts
Telephone
01277 525 020
Last updated
3 November 2026

Questions about Kinloch

Do you take on work at healthcare sites like Blairgowrie Community Hospital?

Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.

Is Kinloch too far out for you?

No. Places such as Kinloch are covered as much as the big towns. Every Scottish council area is within our area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.

What do you need from us to quote?

Approximate metres of joint, photographs of typical and worst areas, and a floor plan are normally enough for a quick quote. For larger floors, a site visit is often best, and you can phone 01277 525 020 or email drawings and photos to arrange it.

What if there’s asbestos in the old mastic?

Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.

Will you just go over the old sealant?

No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.

Do you hold CHAS accreditation?

Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.

Can you follow the specification on our project?

Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.

On site: what to expect

Working in a building that stays open takes some planning. We sign and contain the area we are in, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For work around Kinloch, we aim for one trip, so photographs, sizes and a full list matter. External joints need a dry spell as well.

  1. We look at joint widths, edge condition and the traffic on each route.
  2. A fixed quote follows, listing the treatment for each area and the order of work.
  3. We remove failed material and packed debris until sound concrete is exposed on both faces.
  4. Dust is extracted from the joint and primer applied where the manufacturer specifies it.
  5. We fill each joint to depth and finish it flush so wheels roll straight across.
  6. Each phase reopens when the product is ready for wheels, then we start the next.

What we need from you

  • For older buildings, check the asbestos register before work
  • Let us know about inductions and permits
  • Clear stock, furniture or equipment away from the joints

Request a quote

Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.

Ask for a quote

Advice

Should maintenance staff do it?

A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.

Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.

Signs you need floor joint sealing in Kinloch

Small, hard wheels put a lot of load through a very small area. Crossing an open joint, the wheel drops and knocks the opposite arris, and repeated impacts break the concrete away.

Things that normally lead to an enquiry:

  • A gap opening alongside old joint filler
  • Drivers complaining about joints on a route
  • Grimy joint lines spoiling a showroom floor
  • Joint edges breaking up under truck wheels

Hospital campuses such as Blairgowrie Community Hospital (to the east of Kinloch) grow in stages, leaving movement joints wherever new blocks meet old.

Questions to ask before you book

  • The named product and why it was chosen
  • Their public liability cover
  • Can the work be phased to keep areas open?
  • What the guarantee covers, and for how long

Questions to ask before you appoint anyone

Quoting for work in Kinloch

Each job is priced on its own details. The main factors are:

  • Distance, for remote addresses
  • Which sealant the job calls for
  • Whether the work must be split into stages
  • Joint width, depth and condition

A quote for floor joints depends on how many there are, their condition and the access. Call for a quote.

Before you send an enquiry

For an accurate fixed quote, we need a clear picture of the site. Send us:

  • Approximate linear metres or a joint schedule
  • Any dates the work must fit around
  • Whether an asbestos survey exists
  • A wide shot and a close-up of the area

Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.

Traffic, movement and joints around Kinloch

Kinloch is in the east of Scotland, which is drier than the west. Frost and winter road salt still work into open joints in car parks and yards. Autumn is a sensible time to seal them.

On industrial estates such as Welton Industrial Estate (2.3 miles east of Kinloch), saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. For a school such as Blairgowrie High School, playground and building joints can be done in the holidays.

Kinloch is about 2 miles west of Blairgowrie and Rattray, in Perth and Kinross. Across the PH10 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Across Perth and Kinross, 114 places are covered, including Kinloch. Dundee is covered too, some 18 miles away.

Anyone looking for floor joint sealing in PH10 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We also cover Carsie (2 miles south-east), Blairgowrie and Rattray (2 miles east), Rattray (2 miles east), Meikleour (3 miles south) and Spittalfield (3 miles south-west). A short drive away, we cover Perth (13 miles south), Letham (13 miles south), Scone (11 miles south), Pitlochry (15 miles north-west), Tulloch (12 miles south) and Alyth (7 miles east).

Around Kinloch

Well-known places in the area include Lethendy House (1.9 miles south) and Blairgowrie Community Hospital (1.7 miles east). For a walk, there’s Loch of Drumellie.

Map of Kinloch © OpenStreetMap contributors

When something else is needed

A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is one of these:

  • Uneven floors that need grinding or levelling
  • Unstable slabs moving under traffic
  • Wide or random cracking that suggests a structural issue

If you’re not sure, just ring 01277 525 020 or email us and we will give you a straight answer.

Where we work in Kinloch

  • Loading bays
  • Construction joints
  • Saw-cut induced joints
  • Forklift and pallet-truck routes
  • Joints along racking aisles
  • Retail and showroom floors
Accreditations

Trusted. Accredited. Insured.