Industrial and floor joint sealing in Tulloch, Perth and Kinross
Work needed on a floor joint in Tulloch? We assess it, carry out the work and guarantee our workmanship for 12 months.
- A rough ride across broken joints
- Grimy joint lines spoiling a showroom floor
- Filler that has parted from one face
Floor joint sealing near Tulloch
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Tulloch, done properly
Not every floor joint we treat is in a warehouse. Retail units, showrooms and trade counters have slab joints crossed by trolleys, footfall and cleaning machines, where a gappy, dirty joint looks untidy and snags castors. A neat, flush fill makes the floor easier to clean and look after. Most enquiries involve old filler gone hard, cracked or loose and broken arrises where pallet trucks cross, on saw-cut induced joints, forklift and pallet-truck routes and retail and showroom floors. Whoever orders the work in Tulloch, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
In smaller places such as Tulloch, the joints we are asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Tulloch (PH1)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Where floor joints take the most wear near Tulloch
Tulloch is on Scotland’s drier eastern side. Cold winters and gritting are hard on any yard or deck joint left open. Resealing before the cold months helps protect the edges. At least three named trading, business or retail sites lie within about 3 miles of Tulloch. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Large sites such as Perth Royal Infirmary, 1.3 miles south-east of Tulloch, have car parks, service roads and long elevations with movement joints in brick and panels. Schools like Bertha Park High School often have long brick elevations with movement joints that age quietly. For buildings at a park such as Inveralmond Business Centre, under half a mile north-west of Tulloch, brick and panel movement joints are easy to forget until one leaks.
Tulloch is about 1 mile north-west of Perth, in Perth and Kinross. Commercial clients in Tulloch use us for work on floor joints. We work across 114 places in Perth and Kinross, from busy centres to rural villages. We also cover Dundee, some 19 miles away.
Commercial sites across PH1 are covered for floor joints. Buildings on Arran Road, Crieff Road and Milton Road are within our area for floor joints. Being close to the A9, Tulloch is easy to get to with materials and equipment. If your building is just outside Tulloch, we cover Hillyland (1 mile south-west), Ruthvenfield (1 mile west), Letham (1 mile south), Huntingtower (1 mile south-west) and Stormontfield (3 miles north). Further afield, our area takes in Blairgowrie and Rattray (13 miles north), Crieff (14 miles west), Auchterarder (12 miles south-west), Kinross (14 miles south), Coupar Angus (12 miles north-east) and Rattray (13 miles north-east). As one of the bigger centres in Perth and Kinross, Tulloch has a broad mix of commercial, public and industrial buildings, and we cover them all.
Around Tulloch
Recent enquiries here include premises near St John's Academy and North Inch. The closest station to Tulloch is Perth station, about 1.9 miles south-east of the centre. Other landmarks nearby include Murray Royal Hospital (2.1 miles south-east) and Huntingtower Castle (0.8 miles west). Open spaces near Tulloch include St Magdalene's Hill.
How a job runs
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. For a building near Tulloch, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- We tell you when each zone can carry trucks again and move on to the next.
What we need from you
- Confirm the product named in the specification
- Point out any areas we must not close
- Send your site hours and access windows
Quotes
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. If you have questions first, give us a call on 01277 525 020 or use the quote form.
Advice
Surface by surface
Isolation joints at walls and columns
Joints at walls and columns are often missed when floors are sealed and fill up with dirt. We include them in the survey.
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. A later top-up normally puts that right, and we’ll explain it when we quote.
How the quote is worked out
Before we quote, we look at:
- Whether the work must be split into stages
- How much existing material needs removing
- Which sealant the job calls for
- Backing rod, priming and other preparation
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Details that help us quote
To price the job accurately, we need to understand the site. Useful things to include:
- The site address and postcode
- The product your specification calls for
- Clear photographs of the problem areas
- Your programme or deadline
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
FAQs: Tulloch
Is Tulloch too small for you to travel to?
Not at all. Tulloch is within our area. Our area covers all of Scotland, cities, towns and islands alike. Good photographs up front let us bring everything on the first visit.
Is Inveralmond Business Centre, near Tulloch, within your area?
Yes. We cover Tulloch and the area around it, including industrial estates, business parks and retail parks such as Inveralmond Business Centre. Send details of the unit and the work through our quote form for a quick quote.
Are you fully insured?
Yes. We are fully insured, including public liability cover.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Should floor joints be filled or sealed?
The answer comes from the traffic and the joint’s movement. Trafficked joints on truck routes normally need a semi-rigid filler to support the edges and joints with more movement take a flexible sealant.
How many days will you need on site?
It depends on the scope, but the work usually takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
How soon can traffic go back on the floor?
Cure times vary with the product and the conditions. You will get a reopening time for each area before we start.
For managing agents and facilities managers
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Why it’s worth doing now in Tulloch
Open joints are where dirt collects where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Filled joints are far simpler to keep clean. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Tulloch before they leak.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
Why appoint us
- Our applicators hold CSCS cards
- Products installed to the manufacturer’s instructions
- Sealing commercial buildings since 2005
- Fixed quotes based on photos, drawings or a visit
Take a look at what affects the cost or how we’re accredited.
After the work
A few simple habits keep the new joints working:
- Hold traffic back until the product has cured
- Tell us about strong cleaning chemicals before we quote
- Check joint lines on busy aisles regularly
- Remind operators to lift rather than drag
We’ll give you a time before trucks can run over the new joints and it pays to stick to it. Cones or barriers stop the first driver cutting the corner.
Joints are easiest to look after when someone checks them regularly. A phased plan, worst routes first, spreads the work out so nothing is left to fail.