Kinloch fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Kinloch and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Unsealed openings around new pipes and cables
- Hidden openings found during inspections
- Expanding foam used as fire stopping
Fire stopping in Kinloch
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Kinloch
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, and they are easy to forget. Those on your schedule are closed with the specified product. The enquiries we see most involve expanding foam used as fire stopping and fire sealant pulled out of the opening, across pipe penetrations, small duct penetrations where the tested detail allows and service gaps in risers. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Kinloch, preparation and product choice get the time they need.
Refurbishments in small hotels, schools and care homes around places like Kinloch can leave gaps around new services. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Kinloch (PH10)
- Wider area
- Perth and Kinross
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Fire-rated sealing for Kinloch buildings
The 2 miles around Kinloch include two care or nursing homes. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. We install fire-rated sealant to that tested detail where it is specified.
At a healthcare site like Blairgowrie Community Hospital (1.7 miles east of Kinloch), new services through compartment walls are a constant, and each needs the specified seal. Holiday works at schools like Blairgowrie High School often leave service openings to seal before pupils return.
Kinloch is about 2 miles west of Blairgowrie and Rattray, in Perth and Kinross. Kinloch sits inside our coverage and the rest of Perth and Kinross, with the same fixed quotes and 12-month guarantee as everywhere else. Kinloch is one of 114 places in Perth and Kinross on our list for service penetrations. We also cover Dundee, some 18 miles away.
Anyone looking for fire stopping in PH10 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Just outside Kinloch, we also work in Carsie (2 miles south-east), Blairgowrie and Rattray (2 miles east), Rattray (2 miles east), Meikleour (3 miles south) and Spittalfield (3 miles south-west). Bigger towns within reach include Perth (13 miles south), Letham (13 miles south), Scone (11 miles south), Pitlochry (15 miles north-west), Tulloch (12 miles south) and Alyth (7 miles east).
Landmarks near Kinloch
Well-known places in the area include Lethendy House (1.9 miles south) and Blairgowrie Community Hospital (1.7 miles east). Open spaces near Kinloch include Loch of Drumellie.
Quoting for work in Kinloch
Before we quote, we look at:
- Phasing around occupants
- Joint width, depth and condition
- The total length or number of joints
- Induction, permit and paperwork requirements
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
Details that help us quote
For an accurate fixed quote, we need a clear picture of the site. Send us:
- Any specification or named product
- The site address and postcode
- What the building is and how it’s used
- Your programme or deadline
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, give us a call on 01277 525 020 or email drawings and photos.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is any of the following:
- Signing off or certifying a building’s fire stopping
- Construction that lacks the fire resistance the seal relies on
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you are not sure, just speak to us on 01277 525 020 or use the quote form and we will give you a straight answer.
Joints and surfaces we work on
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
Diagnose, treat, sign off
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, and the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For work around Kinloch, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Explain the parking and delivery arrangements
- Tell us what induction or permit system the site runs
- Make sure the joints can be reached
Get a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or email the details over.
Related advice
Your questions answered
Which Scottish guidance covers penetration seals in Kinloch?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Would you work within a site like Blairgowrie Community Hospital?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Can you send site paperwork?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
Can the sealant be colour-matched?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Is your workmanship covered by a guarantee?
Yes. Our workmanship is backed for 12 months.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
Are you insured?
Yes. We’re fully insured, including public liability cover.
Nearby places to Kinloch
What else we do in Kinloch
How the job changes by surface
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement, with no gaps along the run.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance.
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
Common problems we fix in Kinloch
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Movement in the frame or slab can open the joint. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Look out for the following:
- Openings found when ceilings come down for a refit
- Expanding foam used as fire stopping
- Fire seals cut back for extra cables and never reinstated
- Openings left by services added after handover
Halls and meeting rooms at places like Kinloch Parish Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
What to look for in a quote
- How the joint faces will be prepared and primed
- Whether old or failed sealant will be cut out, not overlaid
- Their plan for phasing and protecting the area
- Their approach to joint depth and backing