Expansion Joint Sealing in Kinloch
Expansion and movement joint sealing in walls, decks and floors across Kinloch, by CSCS-carded applicators. CHAS accredited and fully insured.
- Expansion joints split through the centre of the bead
- Previous reseals laid over old sealant
- Car park joints leaking onto vehicles below
Expansion joint sealing in Kinloch
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle expansion joint sealing in Kinloch
Mastic Doctor has sealed movement joints since 2005, for main contractors, FMs, managing agents and building owners. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. Most enquiries involve joints where the bead has lost adhesion and car park joints leaking onto vehicles below, across precast concrete panel joints, brickwork movement joints and podiums and floor movement joints. Most enquiries from Kinloch start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For floor or movement joints around smaller places like Kinloch, we plan to finish in one visit where we can. Send photos, joint widths and details of the traffic first.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Kinloch (PH10)
- Region
- Perth and Kinross
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Kinloch
Will you take on work at estates like Welton Industrial Estate, close to Kinloch?
Yes, sites like Welton Industrial Estate are within our area, along with the rest of Kinloch. To start, just phone 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Is a smaller place like Kinloch outside your area?
Not at all. Kinloch is within our area. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
Do you use silicone or polyurethane in movement joints?
Movement capability matters most as set out in BS EN ISO 11600. Where two different materials meet, a hybrid sealant can be the better choice.
Can the sealant be colour-matched?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Are you CHAS accredited?
Yes. We are CHAS accredited and a Constructionline member.
Can you work on car park ramps and decks?
Yes. Let us know the opening hours and which levels or bays have to stay available.
What happens if it rains on the day?
Sealing onto a damp surface leads to adhesion failure so we’d rather rearrange than seal in the rain. The work is simply moved to the next suitable day.
How a job runs
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. Jobs near Kinloch are often grouped with others in the same area. Let us know if your dates have any give.
- First, the joints are inspected for width, movement and the type of failure.
- A fixed quote follows, naming the sealant and its movement class.
- We strip out the old seal and prepare the faces, flagging any broken edges that need repair before sealing.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Arrange parking or a loading space
- Send any specification or drawings in advance
Getting a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Advice
Towns and villages near Kinloch
What else we do in Kinloch
Aftercare for building managers
Problems stay small when the joints are checked regularly. Specifically:
- Keep traffic off new joints until the cure time is up
- Avoid parking heavy plant or pallets on joint lines
- Clear dirt from joint lines during routine cleaning
- Raise snow-clearing blades over deck joints where possible
Every joint we seal is backed by a 12-month guarantee on workmanship. Keep the handover details, product and date with your O&M records.
An open joint fills with grit, and a joint full of grit can’t close. The edges then take the pressure and start to spall and the reseal becomes an edge repair as well. Keeping the seal sound avoids all of that.
Floors, slabs and movement joints in Kinloch
The east of Scotland, where Kinloch is, gets less rain than the west. Frost and winter road salt still work into open joints in car parks and yards. Autumn is a sensible time to seal them.
Schools such as Blairgowrie High School have movement joints in their walls and floors that are easy to overlook. Large sites such as Blairgowrie Community Hospital (1.7 miles east of Kinloch) have car parks, service roads and long elevations with movement joints in brick and panels. On industrial estates such as Welton Industrial Estate, which lies east of Kinloch, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Kinloch is about 2 miles west of Blairgowrie and Rattray, in Perth and Kinross. Looking for expansion joint sealing in Kinloch? We can help, as we do across Perth and Kinross. Kinloch is one of 114 places in Perth and Kinross on our list for movement joints. Our Dundee page has more on work in that area.
Work on movement joints is covered throughout PH10. Nearby places we also cover include Carsie (2 miles south-east), Blairgowrie and Rattray (2 miles east), Rattray (2 miles east), Meikleour (3 miles south) and Spittalfield (3 miles south-west) for movement joints. Further afield, our area takes in Perth (13 miles south), Letham (13 miles south), Scone (11 miles south), Pitlochry (15 miles north-west), Tulloch (12 miles south) and Alyth (7 miles east).
Near you in Kinloch
Other landmarks nearby include Lethendy House (1.9 miles south) and Blairgowrie Community Hospital (1.7 miles east). Not far away are Loch of Drumellie.
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Crumbling edges that would give a new bead nothing sound to grip
- Cracking or settlement that calls for an engineer’s assessment
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
If you’re not sure, just speak to us on 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
What we seal
- Blockwork control joints
- Precast concrete panel joints
- Cladding panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Brickwork movement joints
Quoting for work in Kinloch
Before we quote, we look at:
- Any access equipment needed
- Phasing around occupants
- Which sealant the job calls for
- How much there is to seal
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site rules also count.
What to include in your enquiry
A good diagnosis starts with the right details. Let us know:
- Whether an asbestos survey exists
- A wide shot and a close-up of the area
- What the building is and how it’s used
- Drawings or a marked-up plan, if available
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Owners, agents and contractors
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
What happens if it’s left?
Doing joint resealing alongside other planned works can save on access. But joints already letting water in shouldn’t wait for a programme because damage continues. We can split the scope into urgent and planned. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Kinloch, a repair visit takes planning, so it’s better to act early.
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we will explain how it’s made up.
Why us?
- Constructionline member for supplier checks
- CHAS accredited
- Fully insured, including public liability cover
- One contact handling all your sites
See how commercial sealant jobs are priced or our accreditations and insurance.