Industrial and floor joint sealing in Meikleour, Perth and Kinross
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Meikleour and the surrounding area. Send details for a fixed quote.
- Failing joints at loading bays and dock doors
- Chipped and spalling edges along forklift routes
- Unfilled floor joints collecting dirt and grit
Floor joint sealing for Meikleour sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Why it’s worth doing now in Meikleour
Every jolt over a broken joint passes into the truck, the load and the driver. Wheels and bearings wear faster and loads can shift, adding costs nobody plans for. A properly filled joint smooths the route. Around smaller places like Meikleour, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.
A quote for floor joints depends on how many there are, their condition and the access, plus any specification you are working to. Ask us for a fixed quote.
What you get with us
- Old sealant cut out, never sealed over
- CSCS-carded applicators
- Sealing commercial buildings since 2005
- CHAS accredited
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
Floor joint sealing in Meikleour, done properly
Sometimes the concrete either side of a joint has already spalled. A filler laid against broken edges has nothing sound to grip, so if the edges need repair before any filling, we will say so and explain how it affects the programme. Most enquiries involve open saw cuts full of debris and broken arrises where pallet trucks cross, on retail and showroom floors, construction joints and joints along racking aisles. A specialist sealant contractor works differently from a general builder: on jobs in Meikleour, preparation and product choice get the time they need.
In smaller places such as Meikleour, the joints we are asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Meikleour (PH2)
- Wider area
- Perth and Kinross
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Cracks across panels caused by settlement or overload
- Spalled arrises, which need an edge repair first
- A failing floor coating, which is a flooring contractor’s job
Not sure which it is? You can ring 01277 525 020 or email drawings and photos and we will tell you honestly before you book.
Joints and surfaces we work on
- Joints along racking aisles
- Retail and showroom floors
- Construction joints
- Loading bays
- Saw-cut induced joints
- Forklift and pallet-truck routes
Joints that move: notes for Meikleour
The east of Scotland, where Meikleour is, gets less rain than the west. Freezing weather and salt still attack open external joints. Autumn is a sensible time to seal them.
Sites like Blairgowrie Community Hospital (3.3 miles north of Meikleour) carry ambulances, deliveries and visitors’ cars over their road and deck joints. In and around Meikleour, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Meikleour is about 4 miles south of Blairgowrie and Rattray, in Perth and Kinross. We send applicators to Meikleour for floor joints. Our Perth and Kinross coverage takes in 114 places, large and small. Dundee is covered too, around 16 miles from Meikleour.
Postcode districts covered here: PH2. We cover commercial and managed buildings on Mercer Green, Old Military Road and Carsie Road. Just outside Meikleour, we also work in Carsie (2 miles north-east), Burrelton (3 miles south-east), Woodside (3 miles south-east), Spittalfield (3 miles west) and Kinloch (3 miles north). Nearby towns on our patch include Perth (10 miles south), Blairgowrie and Rattray (4 miles north), Letham (10 miles south-west), Scone (8 miles south), Tulloch (10 miles south-west) and Alyth (8 miles north-east).
Local landmarks in Meikleour
In Meikleour, that means premises near Meikleour Hotel, among other places. Well-known places in the area include Kinclaven Castle (1.1 miles south) and Blairgowrie Community Hospital (3.3 miles north). The countryside around Meikleour includes Fingask Loch.
After the work
Keep the joints in good shape with a few simple steps:
- Put loading bays at the top of the list
- Sweep debris out of open joints until they can be filled
- Hold traffic back until the product has cured
- Record damaged joints with a photo and a location
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
Every day an open joint stays full of grit, the edges take more punishment. Filling it ends that cycle while it is still a straightforward job.
FAQs: Meikleour
Is hospital work, at somewhere like Blairgowrie Community Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
Does a site in Meikleour have to shut while its joints are sealed?
Usually not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we’ll plan from there.
What information helps you price floor joint sealing?
Send details through our quote form or by email, with the traffic on each area. A fixed quote follows that shows the products and zones.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we will send them with the quote.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
What guarantee do you give on joint filling?
Our workmanship carries a 12-month guarantee, and we hold public liability insurance.
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Travel to smaller Scottish places like Meikleour is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
What we need from you
- Send any specification or drawings in advance
- Warn occupants and staff about the work
- Tell us your opening times and when work is allowed
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.
Related advice
What the job involves on each surface
Construction joints
Where a day joint crosses a truck route, its edges take heavy punishment. Movement and traffic are both checked before we decide what goes in.
Isolation joints at walls and columns
Joints around columns and along walls let the slab move without cracking against the structure. Something flexible normally suits them, not a stiff filler.
Cost factors for floor joints
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- How much there is to seal
- How much existing material needs removing
- Which sealant the job calls for
- Joint width, depth and condition
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
What to include in your enquiry
We can often quote from photographs and a few details. Please tell us:
- A wide shot and a close-up of the area
- Any specification or named product
- The postcode of the building
- Approximate linear metres or a joint schedule
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.