Floor Joint Sealing in Rattray
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Rattray. Send photographs or drawings for a fixed quote.
- Filler that has parted from one face
- Drivers complaining about joints on a route
- Flexible sealant torn out by wheels
Floor joint sealing in Rattray
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Questions we are asked in Rattray
Do you take on work at healthcare sites like Blairgowrie Community Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Rattray too small for you to travel to?
Not at all. Rattray is within our area. Our area covers all of Scotland, cities, towns and islands alike. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
How long does a typical visit take?
It depends on the scope, but the work usually takes a day or more, depending on the metres of joint and how many zones the floor is split into. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Do you use semi-rigid filler or flexible sealant on floor joints?
It depends on the traffic and the movement. Forklift routes generally call for a semi-rigid filler that holds the arrises, while joints that move more take a flexible sealant.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Floor joint sealing for commercial buildings in Rattray
A working floor can rarely be closed for days on end, so the work is split into zones and treated one area at a time. Tell us your site hours and access windows and we’ll plan around them so the rest of the operation keeps going. If you are dealing with a gap opening alongside old joint filler and failing joints at loading bays and dock doors, we can help, whatever the surface. Facilities teams, main contractors and managing agents in Rattray tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For outside joints near Rattray, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range. Internal floors can be done whenever suits the site.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Location
- Rattray (PH10)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Towns and villages near Rattray
What else we do in Rattray
After the work
Once the work is signed off, these steps help:
- Stop forks and pallets being dragged across joints
- Photograph any joint that starts to chip
- Expect fillers on young slabs to need a top-up
- Keep trucks off new joints until we say they’re ready
Young concrete carries on shrinking, so some fillers part slightly from one face. That is common and is typically dealt with by topping up once the slab has settled down.
Edges tend to break slowly at first, then quickly. Each chip makes the drop deeper and the next impact harder, so it pays to act at the first signs.
Doing it in-house
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Signs you need floor joint sealing in Rattray
Loading bay joints are exposed to wind, wet tyres and bigger temperature swings on top of the heaviest turning movements. That is normally where joint failure starts.
Typical triggers for a call:
- A gap opening alongside old joint filler
- Open saw cuts full of debris
- Scruffy, dirty joint lines on a shop or showroom floor
- Sealant pulled out along a truck route
For a school such as Blairgowrie High School, playground and building joints can be done in the holidays.
Comparing quotes
- Will failed sealant be removed rather than covered?
- Whether primer will be used where the manufacturer specifies it
- How they’ll work around occupants
- Is the sealant right for the movement and the substrate?
Floor joint sealing around Rattray: what changes locally
Being in the east of Scotland, Rattray gets less rain than the west coast. Frost and de-icing salt still find their way into open external joints. Resealing before the cold months helps protect the edges.
A healthcare site such as Blairgowrie Community Hospital (to the south-west of Rattray) depends on car parks, ramps and service yards whose joints take traffic all day. For an occupier at a site such as Welton Industrial Estate (less than half a mile south of Rattray), the joints at loading doors and dock levellers usually see the hardest wear.
Rattray is about 1 mile north-east of Blairgowrie and Rattray, in Perth and Kinross. Businesses, contractors and managing agents in Rattray can call on us for floor joints, as part of our coverage of Perth and Kinross. Rattray is one of 114 places we cover in Perth and Kinross. For work in that direction, see our Dundee page, about 16 miles away.
Work on floor joints is covered throughout PH10, for business premises of every kind. Streets here include New Road, Croft Lane and Haugh Road, and sites on any of them can send details for a fixed quote. Rattray sits on or close to the A926, useful when we plan access and materials. Close to Rattray, our area also takes in Blairgowrie and Rattray (1 mile south-west), Carsie (2 miles south-west), Kinloch (2 miles west), Meikleour (4 miles south-west) and Coupar Angus (4 miles south-east). Bigger towns within reach include Perth (14 miles south), Letham (14 miles south-west), Scone (12 miles south), Tulloch (13 miles south-west), Alyth (4 miles north-east) and Oakbank (15 miles south).
Landmarks near Rattray
Recent enquiries here include premises near The Ericht Ale House, among other places. Well-known places in the area include Lethendy House (3.4 miles south-west) and Blairgowrie Community Hospital (0.7 miles south-west). For a walk, there’s Hill of Alyth and Black Loch.
What sealant work can’t fix
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Level or flatness problems across the floor
- Unstable slabs moving under traffic
- Broken concrete either side of the joint
If you’re not sure, just call 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.
Joints and surfaces we work on
- Forklift and pallet-truck routes
- Construction joints
- Retail and showroom floors
- Loading bays
- Saw-cut induced joints
- Joints along racking aisles
How the job changes by surface
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They often see more movement than sawn joints, and that shapes the product choice.
Loading bays and dock areas
Bays can be treated one or two at a time so goods in and out carry on. Tell us your site hours and access windows and we’ll plan around them.
On site: what to expect
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Jobs near Rattray are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
What we need from you
- Send any specification or drawings in advance
- Point out parking and an unloading spot
- Agree which areas must stay open
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or phone 01277 525 020 or email us if you’d rather talk the job through.