Floor Joint Sealing in Hamnavoe
Commercial sealant work in Hamnavoe for contractors, FMs and building owners: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Trucks and loads jolting over damaged joints
- Joint edges breaking up under truck wheels
- Dock area joints that have failed first
Floor joint sealing in Hamnavoe
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Hamnavoe
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. If you’re dealing with joint fill separating from the concrete and joint edges breaking up under truck wheels, we can help, on construction joints, joints along racking aisles and retail and showroom floors alike. For commercial sealant work in Hamnavoe, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
In smaller places such as Hamnavoe, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Hamnavoe (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Surface by surface
Semi-rigid joint fillers
On industrial routes, a semi-rigid filler is often the right choice. They are installed to the depth the manufacturer specifies and finished flush.
Saw-cut induced joints
Sawn joints make up most of the joint length in a typical industrial floor. We clear them back to clean concrete and fill them to the depth the product calls for with a flush finish.
Diagnose, treat, sign off
Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. For work around Hamnavoe, we aim for one trip, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Preparing the site
- Move anything stored against the joints
- Agree which areas must stay open
- Let us know about inductions and permits
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email us.
Read more
Maintenance after handover
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Record damaged joints with a photo and a location
- Respect the cure time before traffic returns
- Put loading bays at the top of the list
- Plan for a top-up on newer floors
Ask drivers not to drag forks or pallets along the floor. Even a well-filled joint can be damaged by steel scraping along it.
Joints are easiest to look after when someone checks them regularly. A phased plan, worst routes first, spreads the work out and keeps on top of the rest.
What we are called out for in Hamnavoe
A soft, flexible sealant on a forklift route can’t hold the arrises up, so the concrete still breaks beside it. It can go the other way too: a stiff filler in a joint that keeps moving splits or comes away from the sides.
Any of the following is a good reason to get the joints checked over:
- Failing joints at loading bays and dock doors
- A gap opening alongside old joint filler
- Untidy open joints in a retail unit
- A rough ride across broken joints
Around Hamnavoe, open joints collect water and debris, and the arrises are the next to go.
Comparing quotes
- Will failed sealant be removed rather than covered?
- Proof of insurance
- Do they follow the manufacturer’s priming guidance?
- Is the sealant right for the movement and the substrate?
Your questions answered
Our building in Hamnavoe is near the coast: does that change the sealant?
It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Must our site in Hamnavoe stop work while the joints are done?
Rarely. Work is phased around your operations. We agree the sequence and timings with you before we start.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Do you work in Hamnavoe?
Yes. We cover Hamnavoe, and you can call 01277 525 020 or send details through our quote form to get started.
How long does a job like this take?
It depends on the scope, but the work typically takes a day for smaller units, with bigger warehouse floors programmed over several visits. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
Will we need to close the floor?
Typically only the zone we’re working in has to close. Traffic returns to each zone once it has cured, then we move to the next.
What affects the price in Hamnavoe
Before we quote, we look at:
- Quantities, in metres or numbers
- The product specified
- Distance, for remote addresses
- How much existing material needs removing
The product called for affects the cost, and so does the preparation. Access, phasing and site requirements come into it too.
Sending details for a quote
A few photos plus some basic facts will normally do. Please tell us:
- Access details, including height
- The asbestos register, for older buildings
- Any specification or named product
- Any dates the work must fit around
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, ring 01277 525 020 or email us.
When to bring in a specialist
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Also near Hamnavoe
What else we do in Hamnavoe
Slabs, ramps and loading bays in Hamnavoe
With the shore within about 1 mile, Hamnavoe counts as a coastal location. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. Island jobs, Hamnavoe among them, are planned around the ferry and the forecast. Send joint sizes and details of the traffic so the right materials come on the crossing.
For floors and slabs around Hamnavoe, the product is chosen for the traffic and the movement at each joint.
Hamnavoe is in the Shetland Islands. We send applicators to Hamnavoe for floor joints. 63 places across the Shetland Islands fall within our area, including Hamnavoe.
Postcode districts covered here: ZE2. Buildings on Glenburn Road, Atlaness and Gudda Taing are within our area for floor joints. Nearby places we also cover include Toogs (1 mile south), Scalloway (3 miles north-east), Gulberwick (5 miles east), Cunningsburgh (5 miles south-east) and Bremirehoull (6 miles south-east) for floor joints. A short drive away, we cover Lerwick (7 miles north-east), Sound (6 miles north-east) and Sandwick (8 miles south-east). As one of the bigger centres in the Shetland Islands, Hamnavoe has a broad mix of commercial, public and industrial buildings, and we cover them all. Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Local landmarks in Hamnavoe
Other landmarks nearby include Scalloway Museum (3.5 miles north-east). Open spaces near Hamnavoe include West Loch and Hill of Berry.