Floor Joint Sealing in Aithsetter
Need floor joint sealing in Aithsetter? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Saw-cut joints left open and packed with grit
- Filler that has parted from one face
- Grimy joint lines spoiling a showroom floor
Floor joint sealing in Aithsetter
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
What the job involves on each surface
Flexible floor sealants
Movement joints, joints at walls and joints in lightly trafficked areas often take a flexible sealant. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Forklift and pallet-truck routes
Main aisles and cross routes carry the most wheel movements and the joints on them break down first. A semi-rigid filler is common here because it supports the arrises under hard wheels.
About our floor joint sealing in Aithsetter
It isn’t only heavy industry. Shops, showrooms and trade counters have joints that take trolleys, foot traffic and scrubber-driers, where a gappy, dirty joint looks untidy and snags castors. A neat, flush fill makes the floor easier to clean and look after. Site teams most often ask us about untidy open joints in a retail unit and sealant pulled out along a truck route, across forklift and pallet-truck routes, loading bays and construction joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Aithsetter, that means joint design, primers and backing rod as standard.
In smaller places such as Aithsetter, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Aithsetter (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Building owners, agents and FMs in Aithsetter
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Looking after the joints
For the best life from the joints:
- Remind operators to lift rather than drag
- Plan for a top-up on newer floors
- Walk the main routes and inspect joint lines on a regular cycle
- Let us know what the floor is cleaned with
Walk the main truck routes every few months and look along the joint lines. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
A broken joint on a main route is crossed by every truck on that route. Early treatment protects wheels, loads and drivers as much as the floor.
What sets the cost
We price every job individually. The main factors are:
- Induction, permit and paperwork requirements
- How much there is to seal
- Distance, for remote addresses
- Access and working height
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What to include in your enquiry
To price the job accurately, we need to understand the site. Send us:
- Whether the building will be occupied during the work
- The site address and postcode
- Drawings or a marked-up plan, if available
- The asbestos register, for older buildings
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or email us.
Aithsetter: questions and answers
Do you work on the island where Aithsetter is?
Yes. We cover the whole of Scotland, and that includes island locations such as Aithsetter. Island work is planned around ferry crossings and the weather, so photos and a full list before we travel are essential.
Can being near the sea in Aithsetter affect the sealant we need?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
How long does a job like this take?
It depends on the scope, though a typical visit typically takes a day or more, depending on the metres of joint and how many zones the floor is split into. For bigger or phased jobs, we’ll set out a timescale with the quote.
Why is there a gap next to the joint filler?
Separation usually comes from slab shrinkage, poor preparation or the wrong product. We look at which it is before recommending anything.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
From enquiry to sign-off
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking a day or more, depending on the metres of joint and how many zones the floor is split into. Where we can, we combine work around Aithsetter with other jobs nearby. Tell us how flexible your dates are.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- We fill the joints with the agreed product, finished level.
- You get a time for each zone to reopen.
Preparing the site
- Tell us what induction or permit system the site runs
- Send any specification or drawings in advance
- Move anything stored against the joints
Getting a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Read more
Honest limits
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Level or flatness problems across the floor
- Worn screed or surface finishes
- Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we will say what we think.
What we seal
- Forklift and pallet-truck routes
- Joints along racking aisles
- Construction joints
- Saw-cut induced joints
- Retail and showroom floors
- Loading bays
Also near Aithsetter
Other services in Aithsetter
Joints that move: notes for Aithsetter
Aithsetter is within about 2 miles of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. The east of Scotland, where Aithsetter is, gets less rain than the west. Frost and de-icing salt still find their way into open external joints. Sealing them in drier months limits winter damage.
For floors and slabs around Aithsetter, the product is chosen for the traffic and the movement at each joint. A joint near Aithsetter that has lost its sealant lets in water and grit, and the edges suffer next.
Aithsetter is in the Shetland Islands. We cover Aithsetter and the rest of the Shetland Islands, with the same fixed quotes and 12-month guarantee as everywhere else. Across the Shetland Islands, 63 places are covered, Aithsetter among them.
Anyone looking for floor joint sealing in ZE2 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Close to Aithsetter, our area also takes in Cunningsburgh (1 mile west), Bremirehoull (1 mile south-west), Mail (2 miles south-west), Sandwick (4 miles south) and Hoswick (4 miles south-west). Further afield, our area takes in Lerwick (7 miles north), Sound (6 miles north) and Scalloway (6 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Aithsetter
Green spaces nearby include Loch of Fladdabister.