Industrial and floor joint sealing in Appledore, Kent
Floor joint sealing and filling in warehouses, factories and industrial units in Appledore and across Kent. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Old filler gone hard, cracked or loose
- Open saw cuts full of debris
- Drivers complaining about joints on a route
Floor joint sealing for Appledore sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Appledore
Most industrial slabs are divided into panels with saw cuts and day joints, and every one of those joints is an exposed edge under hard wheels. We fill or seal them with a product matched to the traffic and the movement so the edges are held up and debris can’t pack in. The enquiries we see most involve cracked and crumbling joint fill and grimy joint lines spoiling a showroom floor, across saw-cut induced joints, forklift and pallet-truck routes and construction joints. Facilities teams, main contractors and managing agents in Appledore tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Smaller community and commercial buildings around Appledore have their own movement joints in walls and floors. They’re easily forgotten until water gets in or an edge breaks.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Appledore (TN26)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Why deal with it now?
Dirt and spillage gather in open joints where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Flush, filled joints leave nothing for cleaners to dig out. Older rural buildings around Appledore move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
A quote for floor joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
What you get with us
- A fixed quote before work starts
- Over 20 years of commercial sealing
- Workmanship guaranteed for 12 months
- CSCS-carded applicators
Take a look at our cost guide or our accreditations.
What we can’t put right
Honesty saves time and money. Fresh joints won’t solve:
- Cracks across panels caused by settlement or overload
- A floor that rocks at the joints, which needs a structural fix
- Uneven floors that need grinding or levelling
If you’re not sure, just call 01277 525 020 or email us and we’ll give you a straight answer before you book.
What we seal
- Loading bays
- Construction joints
- Retail and showroom floors
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Joints along racking aisles
Cost factors for floor joints
Quotes vary with the job. Expect it to depend on:
- How much there is to seal
- Location, for remote and island sites
- Which sealant the job calls for
- Working within restricted access windows
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Details that help us quote
To price the job accurately, we need a clear picture of the site. Useful things to include:
- The asbestos register, for older buildings
- Photos of the joints, close up and from further back
- The product your specification calls for
- The type of building and who uses it
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or call the office on 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.
Questions we are asked in Appledore
What documents will you need to give us for a job in Appledore?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Does a site in Appledore have to shut while its joints are sealed?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Will we need to close the floor?
Typically only the zone we’re working in has to close. Traffic returns to each zone once it has cured, then we move to the next.
Who decides which product is used?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can you fill joints where the arrises have spalled?
We check the edges as part of the survey. Where they have broken away, we will tell you before quoting the filling so the filling isn’t wasted.
Is Appledore in your area?
Yes. We cover Appledore, within our coverage of Greater London, South East England and Scotland. For a quote, ring 01277 525 020 or email us.
Owners, agents and contractors
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Places near Appledore
More services for Appledore
Where floor joints take the most wear near Appledore
At about 50 miles from central London, Appledore is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day. The South East is one of the drier parts of the UK. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints.
A joint near Appledore that has lost its sealant lets in water and grit, and the edges suffer next.
Appledore is about 8 miles south-west of Ashford, in Kent. Anywhere in TN26, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. 931 places across Kent fall within our area, including Appledore. Brighton is covered too, some 42 miles away.
Postcode districts covered here: TN26 for floor joints. Streets here include The Street, Old Way and Court Lodge Road, and sites on any of them can send details for a fixed quote. Just outside Appledore, we also work in Appledore Heath (1 mile north), Stone in Oxney (1 mile south-west), Reading Street (2 miles west), Stone Corner (3 miles west) and Brattle (3 miles north). Bigger towns within reach include Ashford (8 miles north-east), Hythe (13 miles east), Tenterden (5 miles north-west), Kennington (10 miles north-east), New Romney (7 miles south-east) and Staplehurst (14 miles north-west).
Around Appledore
The closest station to Appledore is Appledore (Kent) station, about 1.3 miles east of the centre. Nearby you will also find Brenzett Aeronautical Museum (3.6 miles south-east). Not far away are Orlestone Forest.
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. Smaller jobs around Appledore can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- We look at joint widths, edge condition and the traffic on each route.
- A fixed quote follows, listing the treatment for each area and the order of work.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- The area is handed back once it has cured enough to take traffic.
Preparing the site
- Make sure the joints can be reached
- Agree which areas must stay open
- Send any specification or drawings in advance
Getting a fixed quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Read more
When to call us in Appledore
A slab keeps shrinking for a long time after it is cast, and the saw cuts are there so it cracks in straight, controlled lines. Each panel pulls back as it shrinks and the joints open up, and a filler placed early can part company with one face.
It’s worth sending us details if you spot any of the following:
- Flexible sealant torn out by wheels
- Cracked and crumbling joint fill
- Grimy joint lines spoiling a showroom floor
- A rough ride across broken joints
Around Appledore, each joint gets a filler or sealant matched to what crosses it and how much it moves.
What your quote should include
- What the guarantee covers, and for how long
- How they handle RAMS and site documents
- Proof of insurance
- Will failed sealant be removed rather than covered?