Industrial and floor joint sealing in Kennington, Kent
Work needed on a floor joint in Kennington? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Soft sealant dragged out of trafficked joints
- Loading bay joints breaking down
- Chipped and spalling edges along forklift routes
Floor joint sealing in Kennington
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Floor joint sealing for commercial buildings in Kennington
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Our CSCS-carded applicators follow your site induction and rules, and we are CHAS accredited and a Constructionline member holding public liability insurance. Completed joints come with a 12-month guarantee on our workmanship. We work on forklift and pallet-truck routes, loading bays and joints along racking aisles, and what we’re called in for most is joint fill separating from the concrete and a rough ride across broken joints. A specialist sealant contractor works differently from a general builder: in Kennington, that means joint design, primers and backing rod as standard.
Work in a smaller place like Kennington is usually one building at a time, so we gather photos and measurements first. Getting widths, depths and traffic details up front means one visit, not two.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Kennington (TN24, TN25)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Also near Kennington
What else we do in Kennington
Your questions answered
Will you take on work at estates like Eurogate Business Park, close to Kennington?
Yes, sites like Eurogate Business Park are within our area, along with the rest of Kennington. To start, just call the office on 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Is Kennington too small for you to travel to?
No. Small places get the same service as large ones. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and we will price the work to it, flagging anything that needs clarifying.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. We will give you an estimate of time on site when we quote.
Can you fill joints where the arrises have spalled?
Edge condition is recorded when we look at the floor. Damaged edges are flagged up front, so nothing is filled that won’t hold.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Is the floor joint work guaranteed?
There is a 12-month guarantee on our workmanship, and we hold public liability insurance.
Looking after the joints
Keep the joints in good shape with a few simple steps:
- Record damaged joints with a photo and a location
- Ask drivers not to drag forks or pallets
- Clear packed debris from open joints regularly
- Plan for a top-up on newer floors
Normal floor cleaning is fine once the product has cured. Tell us about aggressive cleaning products or hot washing at quote stage so the product suits them.
A broken joint on a main route is crossed by every truck on that route. Early treatment protects wheels, loads and drivers as much as the floor.
Warehouse floors and decks around Kennington
Rainfall across the South East, Kennington included, is lower than in many parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and where de-icing salt is spread in winter, open joints let it in. At about 48 miles from central London, Kennington is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
Schools like Kennington Church of England Academy often have long brick elevations with movement joints that age quietly. Another example is Warren Retail Park, 0.9 miles south-west of Kennington, where floors and yards would be done in stages around the occupiers. Large sites such as The One Ashford Hospital, 2 miles to the south-east of Kennington, have car parks, service roads and long elevations with movement joints in brick and panels.
Kennington is about 2 miles north-east of Ashford, in Kent. Our applicators travel to Kennington for work on floor joints. 931 places across Kent fall within our area, including Kennington. For work in that direction, see our London page.
Postcode districts covered here: TN24 and TN25 for floor joints. For a building on Park Road, York Road and Ball Lane or nearby, send details and we will quote for floor joints. Being close to the A28, Kennington is straightforward for us to reach. Nearby places we also cover include Bockhanger (1 mile south-west), Potters Corner (1 mile west), Boughton Lees (2 miles north), Godinton (2 miles south-west) and Willesborough (2 miles south) for floor joints. Nearby towns on our patch include Canterbury (12 miles north-east), Sittingbourne (14 miles north-west), Folkestone (13 miles south-east), Whitstable (14 miles north-east), Faversham (10 miles north) and Hythe (11 miles south-east).
Local landmarks in Kennington
We work on buildings around Towers School and Sixth Form Centre, Conningbrook Lakes Country Park and The Rose Inn and the streets around them. For rail, the closest station is Ashford International station, roughly 1.7 miles south. Other landmarks nearby include County Square (1.4 miles south-west) and William Harvey Hospital (2.1 miles south-east). Open spaces near Kennington include Hatch Park.
Diagnose, treat, sign off
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. For a job in Kennington, the main thing is a clear picture of the work, so send photos of each area. A fixed quote follows.
- First, the zones and order of work are agreed with you.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Getting the site ready
- Point out any areas we must not close
- Have the specification and drawings to hand
- Move anything stored against the joints
Request a quote
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, ring 01277 525 020 or send photos by email.
Read more
Commercial clients in Kennington
Building owners and managing agents use us on everything from one building to a spread of sites around Kennington. Several sites can go on one quote, which keeps the paperwork simple.
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
When it isn’t the sealant
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Unstable slabs moving under traffic
- Cracks across panels caused by settlement or overload
- A failing floor coating, which is a flooring contractor’s job
Not sure which it is? You can phone 01277 525 020 or send photos by email and we will tell you honestly.
Surfaces we seal
- Retail and showroom floors
- Construction joints
- Saw-cut induced joints
- Loading bays
- Forklift and pallet-truck routes
- Joints along racking aisles
How the quote is worked out
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Quantities, in metres or numbers
- Distance, for remote addresses
- How accessible the joints are
- The size and state of each joint
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Before you send an enquiry
To price the job accurately, we need to understand the site. Useful things to include:
- Access details, including height
- The asbestos register, for older buildings
- Clear photos of the problem areas
- Approximate linear metres or a joint schedule
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or send details through our quote form.