Expansion and movement joint sealing in Appledore, Kent
Expansion joint sealing for Appledore, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Movement joints with split or torn sealant
- Sealant pulling off the joint face
- Damp inside where a wall movement joint has failed
Expansion joint sealing in Appledore
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Why it’s worth doing now in Appledore
Doing joint resealing alongside other planned works can save on access. But joints already letting water in shouldn’t wait for a programme. Urgent joints now, the rest later, is often the sensible plan. Around Appledore, it’s better to renew all the failing joints at once. Send photos of each area and we will quote for the lot.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
Why appoint us
- Fully insured, including public liability cover
- A range of standard colours, depending on the product
- Sealing commercial buildings since 2005
- Failed material removed, not covered up
See how commercial sealant jobs are priced or our accreditations and insurance.
Expansion joint sealing in Appledore, done properly
A movement joint only works while its seal does. When the sealant splits or lets go, the gap fills with dirt and water. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. We work on blockwork control joints, cladding panel joints and car park decks and ramps, and what we are called in for most is hardened, cracked sealant on exposed facades and expansion joints filled with dirt and stones. Searching for sealant specialists in Appledore? We’ve been sealing commercial buildings since 2005.
Halls, schools and small commercial buildings near places like Appledore have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Appledore (TN26)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Also near Appledore
Other services in Appledore
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Building owners and managing agents use us on everything from one building to a spread of sites around Appledore. One quote can cover more than one site, which keeps the paperwork simple.
When something else is needed
Sealant solves a lot, but not everything, and we are upfront when that’s the case. It won’t fix:
- Cracking or settlement that calls for an engineer’s assessment
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Concrete or masonry repairs along the arrises
If in doubt, phone 01277 525 020 or email drawings and photos and we’ll say what we think.
Where we work in Appledore
- Brickwork movement joints
- Cladding panel joints
- Car park decks and ramps
- Precast concrete panel joints
- Podiums and floor movement joints
- Blockwork control joints
How a job runs
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. For work around Appledore, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Warn occupants and staff about the work
- Tell us which areas need to stay in use
Quotes
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Related advice
Where floor joints take the most wear near Appledore
Appledore is about 50 miles from central London. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift. The South East is one of the drier parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints.
Around Appledore, each joint gets a filler or sealant matched to what crosses it and how much it moves. Once a joint near Appledore opens up, grit and water get in and the edges start to break.
Appledore is about 8 miles south-west of Ashford, in Kent. We send applicators to Appledore for movement joints. We work across 931 places in Kent, large and small. Our Brighton page has more on work in that area, about 42 miles away.
We cover the TN26 postcode districts. If your site is on The Street, Old Way and Court Lodge Road or close by, send details and we will quote for movement joints. If your building is just outside Appledore, we cover Appledore Heath (1 mile north), Stone in Oxney (1 mile south-west), Reading Street (2 miles west), Stone Corner (3 miles west) and Brattle (3 miles north). Nearby towns on our patch include Ashford (8 miles north-east), Hythe (13 miles east), Tenterden (5 miles north-west), Kennington (10 miles north-east), New Romney (7 miles south-east) and Staplehurst (14 miles north-west).
Near you in Appledore
The nearest railway station is Appledore (Kent) station, roughly 1.3 miles east. A little further out are Brenzett Aeronautical Museum (3.6 miles south-east). Green spaces nearby include Orlestone Forest.
Appledore: questions and answers
What paperwork can you provide for a job in Appledore?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
Does a site in Appledore have to shut while its joints are sealed?
Normally not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Who decides which product is used?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What if the joint edges are damaged?
Spalled edges need repairing before a new seal will last. A bead on a broken edge soon lets go.
Do you reseal car park expansion joints?
Yes, we do. Tyre loads, grit and de-icing salts make these some of the hardest joints to keep sealed.
Do you have public liability insurance?
Yes. We’re fully insured, including public liability cover.
Does the weather affect joint sealing?
Weather matters for any external joint: rain, frost and condensation all stop sealant bonding. Internal floor joints are far less affected.
Quoting for work in Appledore
There’s no standard rate for sealant work, because every site is different. What we take into account:
- Distance, for remote addresses
- Removal of failed or old sealant
- The product specified
- Working within restricted access windows
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Details that help us quote
For an accurate fixed quote, we need to understand the site. Useful things to include:
- The product your specification calls for
- Whether the building will be occupied during the work
- The postcode of the building
- Approximate linear metres or a joint schedule
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
When to bring in a specialist
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.