Appledore Heath floor joint sealing
Work needed on a floor joint in Appledore Heath? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- A gap opening alongside old joint filler
- Trucks and loads jolting over damaged joints
- Broken arrises where pallet trucks cross
Floor joint sealing across Appledore Heath
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing in Appledore Heath
Sometimes the concrete either side of a joint has already spalled. A filler laid against broken edges has nothing sound to grip, so we’ll tell you if the joint edges need repairing first and leave that decision with you. The enquiries we see most involve old filler gone hard, cracked or loose and flexible sealant torn out by wheels, on forklift and pallet-truck routes, loading bays and saw-cut induced joints. Looking for mastic applicators who cover Appledore Heath? We’ve been sealing commercial buildings since 2005.
In and around smaller places like Appledore Heath, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Appledore Heath (TN26)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
When it isn’t the sealant
Not every problem is a sealant problem, and we’re upfront when that’s the case. It won’t fix:
- Uneven floors that need grinding or levelling
- Cracks across panels caused by settlement or overload
- A floor that rocks at the joints, which needs a structural fix
Not sure which it is? You can ring 01277 525 020 or send photos by email and we will tell you honestly.
Where we work in Appledore Heath
- Joints along racking aisles
- Loading bays
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Retail and showroom floors
- Construction joints
After the work
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Photograph any joint that starts to chip
- Let us know what the floor is cleaned with
- Remind operators to lift rather than drag
- Keep trucks off new joints until we say they’re ready
Once cured, the joints get cleaned along with the slab. If you use strong chemicals or hot-water washing, mention it when we quote so the product suits them.
Grit in an open joint does damage every time a wheel crosses it. Filling it ends that cycle before it becomes a repair.
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. For a building around Appledore Heath, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- You get a fixed quote with the product and the phasing set out.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- Each phase reopens when the product is ready for wheels, then we start the next.
Preparing the site
- Tell us which areas need to stay in use
- Confirm the product named in the specification
- Share your working hours and any access restrictions
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Advice
Leave it or put it right?
While the arrises are intact, filling a joint is straightforward. Left until they break, it needs an edge repair before any filling can start which means more downtime in that zone. Older rural buildings around Appledore Heath move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why appoint us
- Specification-led, product-correct work
- A fixed quote before work starts
- Public liability insurance in place
- One contact handling all your sites
Take a look at what affects the cost or our accreditations.
Floor joint sealing around Appledore Heath: points for this area
Central London is about 49 miles from Appledore Heath. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift. The South East is one of the drier parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in.
Once a joint near Appledore Heath opens up, grit and water get in and the edges start to break. For floors and slabs around Appledore Heath, the product is chosen for the traffic and the movement at each joint.
Appledore Heath is about 8 miles south-west of Ashford, in Kent. Commercial clients in Appledore Heath can call on us for floor joints, as part of our coverage of Kent. Our Kent coverage takes in 931 places. We also cover Brighton, around 42 miles from Appledore Heath.
Business premises anywhere in TN26 are within our area for floor joints. We cover commercial and managed buildings on School Road, Heathside and Woodchurch Road. Just outside Appledore Heath, we also work in Appledore (1 mile south), Stone in Oxney (2 miles south-west), Reading Street (2 miles west), Brattle (2 miles north) and Brook Street (2 miles north-west). Further afield, our area takes in Ashford (8 miles north-east), Hythe (13 miles east), Tenterden (4 miles north-west), Kennington (10 miles north-east), New Romney (8 miles south-east) and Staplehurst (13 miles north-west).
Landmarks near Appledore Heath
For rail, the closest station is Appledore (Kent) station, roughly 1.6 miles east of the centre. A little further out are Woodchurch Village Life Museum (3 miles north). Green spaces nearby include Orlestone Forest.
Quoting for work in Appledore Heath
To price the job, we consider:
- Whether the work must be split into stages
- How much there is to seal
- Removal of failed or old sealant
- Induction, permit and paperwork requirements
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Sending details for a quote
A good diagnosis starts with the right details. Tell us:
- Any specification or named product
- How the joints are reached, and at what height
- Whether an asbestos survey exists
- Any dates the work must fit around
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Towns and villages near Appledore Heath
Also in Appledore Heath
Questions about Appledore Heath
What documents will you need to give us for a job in Appledore Heath?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Will our site in Appledore Heath have to close for joint sealing?
Usually not: we work in sections and hand each one back once it has cured. We agree the sequence and timings with you before we start.
How long does a job like this take?
It depends on the scope, but the work normally takes a day for smaller units, with bigger warehouse floors programmed over several visits. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Do you guarantee industrial floor joints?
Our workmanship carries a 12-month guarantee, and we hold public liability insurance.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Can you fill joints where the arrises have spalled?
We check the edges as part of the survey. Where they have broken away, we’ll tell you before quoting the filling so the filling isn’t wasted.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, which many sites require.