Kent · England
Commercial sealant contractors in TN26
Our applicators cover all of the TN26 postcode district, which takes in Hamstreet, Bethersden and Woodchurch. Every joint is properly prepared, with a 12-month guarantee.
Mastic and sealant across TN26
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Areas within TN26
- Hamstreet
- Bethersden
- Woodchurch
- Shadoxhurst
- High Halden
- Hothfield
- Brattle
- Appledore
- Appledore Heath
- Bromley Green
- Stubb's Cross
- Ram Lane
- Shirkoak
- Brook Street
- Durrant Green
- Ruckinge
- Wissenden
- Daniel's Water
- Fleeden
- Further Quarter
- Kenardington
- Orlestone
- Tutt Hill
- Ashford
- Kingsnorth
- Potters Corner
Sealant work we offer in TN26
- Mastic sealing for building owners and managing agents
- Commercial sealant contractors
- Commercial washroom and wet-area sealing
- Industrial and floor joint sealing
- Fire-rated sealing and fire stopping
- Coloured and colour-matched sealant
- Construction and new-build mastic
- Facade and window perimeter sealing
- Expansion and movement joint sealing
- See all services
Let us know the job and your postcode and we’ll come back with a price: call 01277 525 020 or use the quote form.
About commercial sealant contractors in TN26
Having a single contact for all your sites makes sealant far simpler to manage. Single jobs, multi-site packages and planned programmes all come to us, run the same way on every site: details in, a fixed quote back, the sealing done, then our 12-month guarantee. For sites in TN26, the quickest start is to call the office on 01277 525 020 or use the quote form with a list of addresses. Most enquiries involve damp patches where an external joint has failed and frame sealant that has cracked, shrunk or pulled away, on movement joints in walls and floors, window and door perimeters and floor and threshold joints.
Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use.
- You send photos, drawings or a list of the joints and areas involved, and a site visit is booked where it helps.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Finished joints are checked with you and handed over with our 12-month guarantee.
Pricing in TN26
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why choose Mastic Doctor
- Colour agreed before work starts
- Products installed to the manufacturer’s instructions
- Old sealant cut out, never sealed over
- Fixed quotes based on photographs, drawings or a visit
Get a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call 01277 525 020 or send photos by email.
What’s near Hamstreet
Around Hamstreet, our work takes us to commercial buildings near Hamstreet Primary Academy, The Dukes Head pub and Church of the Good Shepherd, among other places. There’s a railway station in Hamstreet itself: Ham Street station. Nearby you will also find Brenzett Aeronautical Museum (3.9 miles south) and William Harvey Hospital (5.8 miles north-east). Open spaces near Hamstreet include Orlestone Forest.
Where commercial joints are in TN26
Across TN26, from Ashford, Hamstreet and Bethersden to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact, with colours matched site to site where the brand needs it.
All of Greater London is inside the ULEZ, and much of the South East is within easy reach of the capital, so jobs in TN26 are planned with access, loading and parking in mind.
Hamstreet: Shops and cafés around stations like Ham Street station, less than half a mile north of Hamstreet, trade from early, so work is timed around them. If you run an office at a site such as Meadow View Business Park, 0.8 miles east of Hamstreet, the sealant at reception desks, tea points and frames ages with each fit-out.
Surface by surface
Movement joints in walls and floors
Brickwork, blockwork and floor slabs all have movement joints that need a flexible seal. Failed seals let grit and water in, and the edges start to suffer. The joints are resealed using a sealant matched to the movement and any traffic.
Commercial kitchens and tea points
A smooth, continuous joint is easier to keep clean, which matters when environmental health officers look at a kitchen. Work is timed around the hours you give us so the kitchen isn’t out of use longer than needed.
Why it fails
A good share of the joints we inspect were topped up instead of being renewed. Fresh sealant won’t stick to the old bead underneath so it soon peels and traps moisture against the joint. Getting back to a clean joint then means removing every layer.
Things that typically lead to an enquiry:
- Black mould through washroom sealant that won’t clean off
- Damp patches where an external joint has failed
- Movement joints packed with grit and debris
- Shrunken sealant along kitchen worktops and splashbacks
When it isn’t the sealant
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be one of these:
- Misted, cracked or failed glazing units (a glazier’s job)
- Water from a services leak rather than a joint
- Old mastic that tests positive for asbestos
Maintenance after handover
A few simple habits keep the new joints working:
- Check joints after other trades have worked nearby
- Keep abrasive pads and scrapers off resealed joints
- Have extract fans checked so wet areas dry out
- Deal with small splits before they become leaks
Give fresh sealant time to cure before it’s cleaned, wetted or walked past. That time depends on the product, the temperature and the joint depth. Keeping signs or barriers up until then protects the finish.
Sealant rarely fails all at once across a building. The first failures are often a warning about the rest so the whole run is worth inspecting. We’ll tell you which sealant joints need doing first and which can wait.
What affects the price in TN26
A fixed quote reflects the actual work. It takes account of:
- Any access equipment needed
- How much existing material needs removing
- Whether the work must be split into stages
- Backing rod, priming and other preparation
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- The asbestos register, for older buildings
- Any dates the work must fit around
- Any specification or named product
- Anything awkward about access or site hours
For a fixed quote, speak to us on 01277 525 020 or email the details over, telling us the site location and the nature of the job. Our quote form is another easy route.
Questions we are asked in TN26
Do you work directly for building managers?
Yes. You can send details through our quote form, and tell us what site paperwork you need.
Can areas stay open during the work?
It’s normal for us to work in occupied buildings. We agree the order of areas, protect what’s nearby and close off only the section we’re sealing for as long as the cure needs.
Is the old sealant taken out first?
Every scrap of failed sealant is removed before the new bead goes on. A bead laid on old silicone peels away and isn’t worth paying for.
Which site documents can you send us?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote. We hold CHAS accreditation and Constructionline membership and carry five million pounds of public liability insurance.
Is it fine to apply new sealant on top of old?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Does commercial sealant work come with a guarantee?
Each job sits under our 12-month guarantee. Looking after the joints as we advise helps them last.
Is TN26 in your area?
Yes. We cover TN26, and you can ring 01277 525 020 or email us to get started.