Industrial and floor joint sealing in Seven Dials, Brighton and Hove
Need floor joint sealing in Seven Dials? It’s simple: send details, get a quote, we seal, guaranteed.
- Loading bay joints breaking down
- Trucks and loads jolting over damaged joints
- Sealant pulled out along a truck route
Need floor joint sealing in Seven Dials?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Maintenance after handover
Cleaning and maintenance staff play a part too. Pass these on to them:
- Stop forks and pallets being dragged across joints
- Hold traffic back until the product has cured
- Record damaged joints with a photo and a location
- Expect fillers on young slabs to need a top-up
Problems inside the 12-month guarantee period are ours to put right. After that, a check before your busiest period keeps small repairs small.
Grit in an open joint does damage every time a wheel crosses it. Getting it filled stops the damage before it becomes a repair.
Floor joint sealing for commercial buildings in Seven Dials
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. If you are dealing with untidy open joints in a retail unit and saw-cut joints left open and packed with grit, we can help, whatever the surface. One point of contact handles commercial sealant work in Seven Dials from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Small units near places like Seven Dials are often converted farm buildings with new concrete floors. Joints in those slabs need a product suited to whatever runs over them, from pallet trucks to foot traffic.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Seven Dials (BN1, BN3, BN50)
- Region
- Brighton and Hove
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Cost factors for floor joints
We price every job individually. The things that drive the figure:
- Which sealant the job calls for
- Site requirements such as inductions and permits
- Distance, for remote addresses
- Whether old sealant has to be cut out first
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Details that help us quote
However big the job, the same details help:
- How the joints are reached, and at what height
- Drawings or a marked-up plan, if available
- Clear photos of the problem areas
- What the building is and how it’s used
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.
Where floor joints take the most wear near Seven Dials
The sea is no more than about 1 mile from Seven Dials. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so a failed joint lets more in and the edges break up sooner. Central London is about 46 miles from Seven Dials. The South East has large numbers of industrial estates and warehouses along the motorway corridors; their floors carry heavy traffic every shift.
At places like Freshfield Industrial Estate, 1.2 miles south-east of Seven Dials, joints are sealed a section at a time so operations carry on. Sites like The Montefiore Hospital, less than half a mile to the west of Seven Dials, carry ambulances, deliveries and visitors’ cars over their road and deck joints. Warehouse floors on estates like Centenary Industrial Estate, 0.9 miles to the north-east of Seven Dials, carry pallet trucks and forklifts over every saw-cut joint.
Seven Dials is about 1 mile west of Brighton, in Brighton and Hove. We send applicators to Seven Dials for floor joints. 29 places across Brighton and Hove fall within our area, including Seven Dials.
Anyone looking for floor joint sealing in BN1, BN3 and BN50 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on Dyke Road, Powis Road and York Avenue or close by, send details and we’ll quote for floor joints. With the A2010 nearby, Seven Dials is easy to get to with materials and equipment. Sites close to Seven Dials are covered too, including West Hill (1 mile south-east), Prestonville (1 mile north), Brunswick (1 mile south-west), Brighton (1 mile east) and Hanover (1 mile east). Further afield, our area takes in Portslade (3 miles west), Hangleton (3 miles north-west), Saltdean (5 miles east), Roedean (3 miles south-east), Rottingdean (4 miles east) and Ovingdean (3 miles east).
Landmarks near Seven Dials
Around Seven Dials, our work takes us to commercial buildings near Stanford Junior School, The Cow pub and St. Ann's Well Gardens, among other places. Seven Dials has its own railway station: Brighton station. Nearby you will also find Montefiore Hospital (under half a mile west) and Brighton Transport Museum (0.6 miles north). Open spaces near Seven Dials include Newmarket Hill and Whitehawk Hill.
For managing agents and facilities managers
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Surface by surface
Isolation joints at walls and columns
Where racking or plant sits near column joints, access is agreed before we start so nothing has to move unexpectedly.
Saw-cut induced joints
A sawn joint left open soon packs with debris and chips at the edges. Filled in good time, they stay narrow and neat.
On site: what to expect
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. What matters most for a job in Seven Dials is a clear list of what needs doing. You will then get a fixed price for the work.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Before we start on site
- For older buildings, check the asbestos register before work
- Have the specification and drawings to hand
- Let us know about inductions and permits
Getting a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, ring 01277 525 020 or email a schedule or drawings.
Read more
When it isn’t the sealant
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is any of the following:
- Broken concrete either side of the joint
- Cracks across panels caused by settlement or overload
- Uneven floors that need grinding or levelling
If you are not sure, just phone 01277 525 020 or email the details over and we’ll give you a straight answer.
What we seal
- Joints along racking aisles
- Construction joints
- Retail and showroom floors
- Forklift and pallet-truck routes
- Loading bays
- Saw-cut induced joints
FAQs: Seven Dials
Is Seven Dials too far out for you?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Will you take on work at estates like Centenary Industrial Estate, close to Seven Dials?
Yes, sites like Centenary Industrial Estate are within our area, along with the rest of Seven Dials. To start, just call 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Will we need to close the floor?
Usually only the zone we are working in has to close. Traffic returns to each zone once it has cured and the next zone follows.
Is it normal for joint filler to separate?
It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We look at which it is before recommending anything.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
How long before trucks can use the joints?
The wait is set by the product’s cure time, and cold floors slow it down. We plan the phasing so that waiting time fits your operation.