Fire Stopping in Winford
Looking for fire stopping in Winford? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Openings found when ceilings come down for a refit
- Open linear gaps along the top of fire-resisting walls
- Seals that don’t match their tested detail
Fire stopping in Winford
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Winford, done properly
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance. If you have improvised or mixed-product fire seals and hidden openings found during inspections, we can help, whatever the surface. Whoever orders the work in Winford, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Barn and farm-building conversions near places like Winford often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Winford (PO36)
- Wider area
- Isle of Wight
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Fire-rated sealing for Winford buildings
In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. The area within 2 miles of Winford holds a good number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Halls and meeting rooms at places like All Saints' Church sometimes gain new services, and any compartment wall crossed needs the specified seal. In a school such as Newchurch Primary School, fire-rated sealant goes in around service penetrations where it is specified. In a hotel such as Apse Manor Country Hotel, which lies south of Winford, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Winford is about 5 miles south of Ryde, in the Isle of Wight. We cover commercial sites throughout Winford, whether it’s a single job or part of a planned programme. Winford is one of 125 places we cover in the Isle of Wight for service penetrations. We also cover Portsmouth, some 12 miles away.
Work on service penetrations is covered throughout PO36, for business premises of every kind. For a building on Chambers Drive, Alverstone Road and Woods Drive or nearby, we can quote for service penetrations. Sites close to Winford are covered too, including Branstone (1 mile west), Apse Heath (1 mile south), Princelett (1 mile south-west), Newchurch (1 mile north) and Hale Common (1 mile west). Nearby towns on our patch include Newport (5 miles north-west), Ryde (5 miles north), Cowes (9 miles north-west), Ventnor (4 miles south), East Cowes (8 miles north-west) and Oakfield (5 miles north-east). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
What’s near Winford
In Winford, that means premises near The Pointer Inn and Sandown Bay Academy and the streets around them. The nearest railway station is Lake station, roughly 1.6 miles east. Nearby you’ll also find Arthur Webster Memorial Hospital for Children (1.6 miles south-east) and Wight Aviation Museum (0.8 miles east). Open spaces near Winford include Brading Down and Alverstone Mead.
When something else is needed
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. It won’t fix:
- Fire risk assessments, a job for a competent assessor
- Approving the work on behalf of building control
- Plastic pipes whose detail calls for a collar or wrap
If you’re not sure, just call the office on 01277 525 020 or email us and we’ll give you a straight answer.
What we seal
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
Winford: questions and answers
Will you take on work at estates like Branstone Business Park, close to Winford?
Yes. Estates, retail parks and business parks around Winford, Branstone Business Park among them, are all within reach. Photos and a short description are enough for a first look.
Is Winford off your patch?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
Is the BS 476 change in 2029 relevant to fire stopping?
For buildings in England, Approved Document B removes BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence. Scotland follows its own Technical Handbook, including clause 2.1.14 on service penetrations.
Do you need to see the site first?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
Do you hold third-party fire-stopping installer certification?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
How the quote is worked out
What shapes the price:
- Access and working height
- Phasing around occupants
- The product specified
- How much there is to seal
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Before you send an enquiry
We can often quote from photographs and a few details. It helps to include:
- How the joints are reached, and at what height
- Asbestos survey details if the building is older
- Rough lengths or quantities, or drawings if you have them
- Where the site is, with the postcode
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, call 01277 525 020 or email the details over.
Nearby places to Winford
Also in Winford
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
On site: what to expect
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact. If others near Winford need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Point out any areas we must not close
- Share the asbestos register for older buildings
- Let building users know which areas are affected
Quotes
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or phone 01277 525 020 or use the quote form if you’d rather talk the job through.
Related advice
Work for main contractors and building owners
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Aftercare for building managers
For the best life from the joints:
- File the specified details where the next contractor can find them
- Agree the fire-stopping specification before services go in
- Brief every trade that openings they make must be sealed
- Include service cupboards in routine inspections
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original, or a new specification from the designer.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open.