Fire Stopping in Hale Common
Fire-rated and intumescent sealing of service penetrations and linear gaps in Hale Common and across the Isle of Wight. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Seals disturbed by maintenance and left open
- Openings found when ceilings come down for a refit
- Openings left by services added after handover
Fire stopping for Hale Common sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Hale Common
No fire sealant works on its own: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in. We work on small duct penetrations where the tested detail allows, cable penetrations and pipe penetrations, and what we’re called in for most is hidden openings found during inspections and open linear gaps along the top of fire-resisting walls. Facilities teams, main contractors and managing agents in Hale Common tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Smaller places such as Hale Common still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application.
- Location
- Hale Common (PO36, PO30)
- Region
- Isle of Wight
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Different surfaces, different methods
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, with no gaps along the run.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do.
Places near Hale Common
Also in Hale Common
Your questions answered
Do you cover business parks and estates near Hale Common, such as Branstone Business Park?
Yes, sites like Branstone Business Park are within our area, along with the rest of Hale Common. A few photographs and the unit address let us price the work.
Is Hale Common off your patch?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Do you certify or sign off fire stopping?
No. Approval sits with the designer, principal designer or building control. We will confirm the product and detail installed and agree any further records when we quote.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Which standards are fire seals tested to?
In short, BS EN 1366-3 and 1366-4 are the fire tests and BS EN 13501-2 is how results are classified. An EI 60 seal kept its integrity and insulation for 60 minutes as tested.
Can you seal any opening with fire-rated sealant?
No. A sealant’s evidence covers set services, gaps and wall or floor types. If an opening falls outside, it needs another solution.
Our process
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. If others near Hale Common need work, visits can be combined. A fixed quote is given before anything starts.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Getting the site ready
- For older buildings, check the asbestos register before work
- Point out any areas we must not close
- Point out parking and an unloading spot
Quotes
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Honest limits
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Fire doors, dampers or other fire safety equipment
- Construction that lacks the fire resistance the seal relies on
- Openings that need collars, wraps, batts or boards rather than sealant
If in doubt, ring 01277 525 020 or email drawings and photos and we’ll say what we think.
Surfaces we seal
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
Do you need fire stopping in Hale Common?
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Any of the following is a good reason to get the joints checked over:
- Penetration schedules that need working through
- Fire sealant pulled out of the opening
- Non-fire-rated filler around services
- Damaged fire seals in risers and voids
Offices at parks like Branstone Business Park, 0.6 miles south-east of Hale Common, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.
What your quote should include
- What the guarantee covers, and for how long
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Whether old or failed sealant will be cut out, not overlaid
- Whether their applicators hold CSCS cards
General trades versus a specialist
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
How the quote is worked out
We price every job individually. The main factors are:
- Joint width, depth and condition
- Quantities, in metres or numbers
- Phasing around occupants
- Which sealant the job calls for
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
What to include in your enquiry
There’s no need for a formal survey. A few details are enough to get going:
- Whether the building will be occupied during the work
- Where the site is, with the postcode
- Drawings or a marked-up plan, if available
- Anything awkward about access or site hours
For a fixed quote, call the office on 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Compartment walls and floors in Hale Common
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
Large healthcare estates like Arthur Webster Memorial Hospital for Children (to the south-east of Hale Common) change their services often, so penetration seals are worth checking after M&E work. For a school such as Newchurch Primary School, penetration sealing fits best at the end of the summer works.
Hale Common is about 3 miles north-west of Shanklin, in the Isle of Wight. Looking for fire stopping in Hale Common? We can help, as we do across the Isle of Wight. Hale Common is one of 125 places in the Isle of Wight on our list for service penetrations. Portsmouth is covered too, around 12 miles from Hale Common.
Commercial sites across PO36 and PO30 are covered. Being close to the A3056, Hale Common is easy to get to with materials and equipment. Nearby places we also cover include Branstone (1 mile east), Winford (1 mile east), Princelett (1 mile south-east), Newchurch (1 mile north-east) and Apse Heath (1 mile south-east). Nearby towns on our patch include Newport (4 miles north-west), Ryde (6 miles north-east), Cowes (8 miles north-west), Sandown (3 miles east), Shanklin (3 miles south-east) and Ventnor (4 miles south). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call the office on 01277 525 020 or send photos by email.
What’s near Hale Common
For rail, the closest station is Shanklin station, roughly 2.5 miles south-east. Nearby you’ll also find Museum of Country And Agriculture (1 mile north) and Sandown Castle (3.5 miles east). Open spaces near Hale Common include Stenbury Down and Alverstone Mead.