Oakfield fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps across Oakfield, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Service penetrations left open after M&E works
- Openings found when ceilings come down for a refit
- Unsealed joints where partitions meet the slab
Fire stopping near Oakfield
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Oakfield
Facilities managers in Oakfield often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. We work on pipe penetrations, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows, and the usual reasons a site gets in touch are unsealed penetrations discovered above suspended ceilings and fire-stopping items raised at inspection or handover. Searching for sealant specialists in Oakfield? We have been sealing commercial buildings since 2005.
Fire-rated sealing in a place like Oakfield is usually a single building at a time. With the specification and photographs of the gaps, we can give a fixed quote and bring the right products.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Oakfield (PO33)
- Region
- Isle of Wight
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Oakfield: questions and answers
Do you cover business parks and estates near Oakfield, such as Ryde Business Park?
Yes. Estates, retail parks and business parks around Oakfield, Ryde Business Park among them, are all within reach. Photos and a short description are enough for a first look.
What does the BS 476 change mean for fire-rated sealant in Oakfield?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Do you offer coloured sealant?
It depends on the product. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
How long does a typical visit take?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Other services in Oakfield
Looking after the joints
Cleaning and maintenance staff play a part too. Pass these on to them:
- Check with the data sheet before painting over fire sealant
- Arrange inspection before areas are covered up
- Ask the designer to confirm details early on refits
- Make fire stopping part of every scope that crosses a fire-resisting wall
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown and get them dealt with.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match.
Service penetrations in Oakfield buildings
Five care or nursing homes sit less than 2 miles from Oakfield. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
For a hotel such as Dorset House Hotel, which lies north of Oakfield, penetration seals are worth checking after any refit or services upgrade. Older community buildings such as St John's Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Oakfield is about 6 miles south-west of Southsea, in the Isle of Wight. Oakfield sits inside our coverage and the rest of the Isle of Wight, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 125 places in the Isle of Wight. We also cover Portsmouth, around 7 miles from Oakfield.
Business premises anywhere in PO33 are within our area for service penetrations. Buildings on Park Road, Rink Road and Hope Road are within our area for service penetrations. Main routes into Oakfield include the A3055, useful when we plan access and materials. Just outside Oakfield, we also work in Elmfield (1 mile east), Ryde (1 mile north-west), Appley (1 mile north-east), Westridge (1 mile south-east) and Haylands (1 mile west). Bigger towns within reach include Newport (6 miles west), Cowes (7 miles west), Sandown (5 miles south), Shanklin (6 miles south), Ventnor (9 miles south) and East Cowes (6 miles west). Oakfield is one of the busier places in the Isle of Wight, and we take on service penetrations for its commercial and public buildings. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you speak to us on 01277 525 020 or email us.
Local landmarks in Oakfield
We work on buildings around Ryde Academy, Ryde School with Upper Chine and The Railway pub, among other places. There’s a railway station in Oakfield itself: Ryde St Johns Road station. Other landmarks nearby include Gosport War Memorial Hospital (5 miles north) and The Donald Mcgill Museum (0.8 miles north). Green spaces nearby include Alan Hersey Nature Reserve and Brading Down.
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Several jobs near Oakfield can be grouped on one trip. Mention the building’s opening times and we will work within them.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Getting the site ready
- Share the asbestos register for older buildings
- Confirm the product named in the specification
- Let building users know which areas are affected
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Related advice
General trades versus a specialist
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Building owners, agents and FMs in Oakfield
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
When to call us in Oakfield
A common fault is a product that was never fire-rated in the first place: builders’ foam or ordinary silicone used to fill a hole. It may look closed, but it has no tested fire performance in that position, so it has to come out.
Most enquiries start with one or more of the following:
- Improvised or mixed-product fire seals
- Seals disturbed by maintenance and left open
- Fire sealant pulled out of the opening
- Openings left by services added after handover
For a building at a site such as Ryde Business Park, which lies south of Oakfield, a check of penetration seals after each fit-out is good practice.
What to look for in a quote
- Which product they’ll use, and why it suits the joint
- What level of public liability insurance do they hold?
- How the joint faces will be prepared and primed
- Whether their applicators hold CSCS cards
Honest limits
Being straight saves everyone time. Fresh joints won’t solve:
- Reviewing a building’s overall fire safety
- Writing the fire-stopping specification
- Large openings beyond what any sealant detail covers
If in doubt, phone 01277 525 020 or email a schedule or drawings and we will say what we think before you book.
Where we work in Oakfield
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Linear gaps at wall heads