Fire stopping in Toogs
Fire stopping in Toogs, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Hidden openings found during inspections
- Expanding foam used as fire stopping
- Improvised or mixed-product fire seals
Fire stopping across Toogs
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
When something else is needed
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be one of these:
- Fire doors, dampers or other fire safety equipment
- Signing off or certifying a building’s fire stopping
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can phone 01277 525 020 or email us and we will tell you honestly before you book.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
Fire stopping in Toogs
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, give us a call on 01277 525 020 or email the details over with the schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. We work on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and pipe penetrations, and what we are called in for most is unsealed openings around new pipes and cables and hidden openings found during inspections. Searching for sealant specialists in Toogs? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Refurbishments in small hotels, schools and care homes around places like Toogs can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Toogs (ZE2)
- Region
- Shetland Islands
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Building owners, agents and FMs in Toogs
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Toogs can form part of a wider programme.
We work for building owners and managing agents on everything from one building to a spread of sites around Toogs. Several sites can go on one quote, which keeps the paperwork simple.
Maintenance after handover
To get the most from the new sealant:
- Keep general-purpose fillers away from compartment walls
- Include service cupboards in routine inspections
- Put resealing into every M&E and fit-out package
- File the specified details where the next contractor can find them
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown, and report them promptly.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
How the job changes by surface
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access is often tight, so we agree it with you in advance.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do and we will tell you what the detail says instead.
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Where we can, we combine work around Toogs with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Let building users know which areas are affected
- Flag any permit to work we’ll need
- Send any specification or drawings in advance
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Read more
Other services in Toogs
Fire stopping in Toogs: the local picture
Island jobs, Toogs among them, are planned around the ferry and the forecast. The specification and photographs of each penetration let us bring the right products first time. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
In a building such as Burra Parish Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Toogs is in the Shetland Islands. If you are looking for fire stopping in Toogs, we can help. Our the Shetland Islands coverage takes in 63 places.
Commercial sites across ZE2 are covered for service penetrations. Nearby places we also cover include Hamnavoe (1 mile north), Scalloway (4 miles north-east), Cunningsburgh (4 miles south-east), Bremirehoull (4 miles south-east) and Aithsetter (5 miles south-east) for service penetrations. Further afield, our area takes in Lerwick (7 miles north-east), Sound (7 miles north-east) and Sandwick (7 miles south-east). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Landmarks near Toogs
Open spaces near Toogs include Hill of Berry and Loch of Couster.
Signs you need fire stopping in Toogs
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe, and the repair is often skipped.
Common reasons buildings call us in:
- Builders’ foam or ordinary silicone in compartment walls
- Seals that don’t match their tested detail
- Fire sealant pulled out of the opening
- Unsealed openings around new pipes and cables
Buildings near Toogs get the fire-rated product that’s specified, installed to its tested detail.
Questions to ask before you book
- Is the sealant right for the movement and the substrate?
- How they handle RAMS and site documents
- Their public liability cover
- Will failed sealant be removed rather than covered?
Toogs: questions and answers
How do Scotland’s building standards affect fire-rated sealant in Toogs?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Do you work on the island where Toogs is?
Yes. Islands are part of our area, Toogs included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
What about RAMS and site documents?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Can you work while the building is occupied?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.