Fire stopping in Bremirehoull
Sealant work in Bremirehoull for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Seals that don’t match their tested detail
- Fire seals cut back for extra cables and never reinstated
- Penetration schedules that need working through
Fire stopping near Bremirehoull
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Bremirehoull
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. We work on joints between fire-resisting walls and floors, cable penetrations and linear gaps at wall heads, and the usual reasons a site gets in touch are seals disturbed by maintenance and left open and old intumescent sealant that has split away. One point of contact handles commercial sealant work in Bremirehoull from the first photos to the final walk-round, whether it’s one building or several.
Around smaller places such as Bremirehoull, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Bremirehoull (ZE2)
- Region
- Shetland Islands
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Keeping the joints sound
Regular inspection catches problems early. In particular:
- Flag new cables with no seal around them
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Settle who seals which penetrations at the start of a project
- Leave fire sealant to cure fully before covering it
During planned inspections, look at seals in risers, cupboards and voids. Look for cracks, unsealed new cables and gaps that have been enlarged and get them dealt with.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned.
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Jobs near Bremirehoull are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Let building users know which areas are affected
- Have the specification and drawings to hand
- Move anything stored against the joints
Getting a fixed quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Related advice
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Why act early in Bremirehoull
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. For buildings near Bremirehoull, dealing with all the failing joints at once saves return trips. Send photographs and we will quote for everything together.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why clients in Bremirehoull choose us
- One number for every site we cover
- Failed material removed, not covered up
- Public liability insurance in place
- Clear, fixed quotes
See how commercial sealant jobs are priced and our accreditations and insurance.
Service penetrations in Bremirehoull buildings
Work on Bremirehoull has to fit the ferry timetable and the forecast. The specification and photographs of each penetration let us bring the right products first time. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Buildings near Bremirehoull get the fire-rated product that’s specified, installed to its tested detail.
Bremirehoull is about 8 miles south of Lerwick, in the Shetland Islands. Our applicators travel to Bremirehoull for work on service penetrations. Our the Shetland Islands coverage takes in 63 places.
Commercial sites across ZE2 are covered for service penetrations. Streets here include Midgarth and Dandiegarth. If your building is just outside Bremirehoull, we cover Cunningsburgh (1 mile north), Mail (1 mile south), Aithsetter (1 mile north-east), Sandwick (3 miles south) and Hoswick (3 miles south). Nearby towns on our patch include Lerwick (8 miles north), Sound (7 miles north) and Scalloway (7 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call 01277 525 020 or email drawings and photos.
Near you in Bremirehoull
Open spaces near Bremirehoull include Loch of Fladdabister.
Places near Bremirehoull
Other services in Bremirehoull
FAQs: Bremirehoull
Can you take on a job in Bremirehoull, on the island?
Yes. Islands are part of our area, Bremirehoull included. Island work is planned around ferry crossings and the weather, so photographs and a full list before we travel are essential.
Will you design a fire-stopping scheme for our building in Bremirehoull?
No. The designer or fire engineer sets the detail and building control accepts it. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact.
Do you offer coloured sealant?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Can the building stay open while you work?
Yes, with some planning. Tell us your site hours and access windows and we’ll plan around them.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Do you need fire stopping in Bremirehoull?
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access usually bring them to light.
If one of these sounds familiar, it’s time for a closer look:
- Unsealed openings around new pipes and cables
- Expanding foam used as fire stopping
- Unsealed penetrations discovered above suspended ceilings
- Penetration schedules that need working through
Around Bremirehoull, fire-stopping design belongs to the designer and building control; installation to the specification is our part.
Questions to ask before you book
- Is the sealant right for the movement and the substrate?
- Proof of insurance
- How they’ll work around occupants
- Will failed sealant be removed rather than covered?
When something else is needed
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Fire doors, dampers or other fire safety equipment
- Plastic pipes whose detail calls for a collar or wrap
Not sure which it is? You can call 01277 525 020 or email drawings and photos and we’ll tell you honestly.
What we seal
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations