Shandwick fire stopping
Planning work on a service penetration in Shandwick? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Seals that don’t match their tested detail
- Fire-stopping items raised at inspection or handover
- Head-of-wall gaps with no fire seal
Need fire stopping in Shandwick?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Shandwick: questions and answers
Is Shandwick off your patch?
Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. Good photos up front let us bring everything on the first visit.
What do Scotland’s building standards say about service penetrations in Shandwick?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
How do you choose the sealant?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Fire stopping in Shandwick
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. If you’re dealing with fire-stopping items raised at inspection or handover and expanding foam used as fire stopping, we can put it right, on cable penetrations, pipe penetrations and linear gaps at wall heads alike. A specialist sealant contractor works differently from a general builder: on jobs in Shandwick, preparation and product choice get the time they need.
Around smaller places such as Shandwick, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Location
- Shandwick (IV20)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Penetration seals near Shandwick
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. We install what’s specified, to the product’s tested detail.
Buildings near Shandwick get the fire-rated product that’s specified, installed to its tested detail.
Shandwick is about 12 miles north of Nairn, in Highland. We cover commercial sites throughout Shandwick. Shandwick is one of 256 places in Highland on our list. For work in that direction, see our Aberdeen page (79 miles or so).
Work on service penetrations is covered throughout IV20, for business premises of every kind. Buildings on Shore Street and New Street are within our area. Just outside Shandwick, we also work in Balintore (1 mile north-east), Loans of Tullich (1 mile north-west), Hilton of Cadboll (1 mile north-east), Fearn (2 miles north-west) and Hill of Fearn (2 miles north-west). Bigger towns within reach include Nairn (12 miles south), Tain (7 miles north-west), Alness (13 miles west), Dornoch (10 miles north-west), Invergordon (10 miles south-west) and Fortrose (14 miles south-west). Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
Landmarks near Shandwick
For rail, the closest station is Fearn station, roughly 3.3 miles north-west. For a walk, there’s Loch Eye.
Keeping the joints sound
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Look above ceilings when tiles are lifted for other jobs
- Flag new cables with no seal around them
- Agree the fire-stopping specification before services go in
- Keep product data and details in the fire safety file
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged and get them dealt with.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and the work runs in step with the M&E.
What happens if it’s left?
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme, so earlier action pays back. Renewing every failing joint on one visit is the sensible approach for a place like Shandwick. Send photos and we’ll quote for everything together.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What you get with us
- One phone line for London, the South East and Scotland
- Products installed to the manufacturer’s instructions
- 12-month guarantee on workmanship
- CHAS accredited
See what affects the cost or our accreditations and insurance.
What we’re called out for in Shandwick
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. The opening looks sealed but has no fire test evidence behind it and has to be removed.
Any of the following is a good reason to get the joints checked over:
- Old intumescent sealant that has split away
- Non-fire-rated filler around services
- Openings found when ceilings come down for a refit
- Snag lists that include open service penetrations
Industrial units on estates such as Cadboll Industrial Estate, 1.7 miles north of Shandwick, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
What to look for in a quote
- How the existing material will be dealt with
- Are they CHAS accredited or on Constructionline?
- Do they follow the manufacturer’s priming guidance?
- Proof of insurance
What the job involves on each surface
Small ducts
Some fire-rated sealant details cover small ducts. Larger or fire-rated ductwork usually needs a different solution set by the designer and we flag that rather than guess.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point against the detail’s limits, and any that don’t are flagged.
Commercial clients in Shandwick
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Also near Shandwick
More services for Shandwick
How a job runs
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Where we can, we combine work around Shandwick with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Tell us what induction or permit system the site runs
- Explain the parking and delivery arrangements
- Make sure the joints can be reached
Quotes
For a fixed quote, ring 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.