Fire stopping in Fortrose
Fire stopping in Fortrose, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Open linear gaps along the top of fire-resisting walls
- Fire sealant pulled out of the opening
- Non-fire-rated filler around services
Fire stopping for Fortrose sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When something else is needed
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Deciding what a wall or floor needs, which belongs to the designer
- Signing off or certifying a building’s fire stopping
- Walls or floors that aren’t fire-resisting to begin with
If you’re not sure, just give us a call on 01277 525 020 or send details through our quote form and we will give you a straight answer.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Pipe penetrations
Fire stopping in Fortrose, done properly
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. The enquiries we see most involve expanding foam used as fire stopping and openings left by services added after handover, across joints between fire-resisting walls and floors, linear gaps at wall heads and service gaps in risers. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Fortrose is the same: the right product in a properly prepared joint.
Hotels and care homes around smaller places like Fortrose often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Fortrose (IV10)
- Region
- Highland
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For a building near Fortrose, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Flag any permit to work we will need
- Explain the parking and delivery arrangements
- Clear stock, furniture or equipment away from the joints
Ask for a quote
To get a fixed quote, call the office on 01277 525 020 or email us. Our quote form is another easy route.
Read more
Commercial clients in Fortrose
Building owners and managing agents use us on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Doing it in-house
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Compartments and services around Fortrose
A 2-mile radius around Fortrose takes in a number of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
In a building such as St Andrew's Episcopal Church, any service penetration through a fire-resisting wall should be sealed to the specified detail. Where a unit on an estate such as Avoch Industrial Estate, 2.4 miles south-west of Fortrose, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Fortrose is about 8 miles north-east of Inverness, in Highland. Commercial clients in Fortrose can call on us for service penetrations, as part of our coverage of Highland. Across Highland, 256 places are covered, including Fortrose. There’s a separate page for Aberdeen, roughly 80 miles from Fortrose.
Postcode districts covered here: IV10 for service penetrations. Among the streets we cover are Cathedral Square, High Street and Station Road, and sites on any of them can send details for a fixed quote. Fortrose sits on or close to the A832. We also cover Rosemarkie (1 mile north-east), Avoch (2 miles south-west), Killen (3 miles west), Ardersier (4 miles east) and Davidston (5 miles north) for service penetrations. Bigger towns within reach include Inverness (8 miles south-west), Nairn (10 miles east), Cradlehall (7 miles south), Merkinch (8 miles south-west), Dingwall (11 miles west) and Hilton (9 miles south). Where a site is remote or on an island, we plan travel and materials carefully.
Landmarks near Fortrose
For rail, the closest station is Inverness Airport station, about 4.3 miles south-east of the centre. Nearby you will also find Groam House Museum (0.9 miles north-east) and Chanonry of Ross (under half a mile north-west). For a walk, there’s Fairy Glen.
Cost factors for service penetrations
What shapes the price:
- Whether the work must be split into stages
- Removal of failed or old sealant
- The size and state of each joint
- The site’s rules and procedures
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Sending details for a quote
We can often quote from photos and a few details. It helps to include:
- The type of building and who uses it
- The site address and postcode
- Any specification or named product
- Clear photographs of the problem areas
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, call 01277 525 020 or email us.
Why it’s worth doing now in Fortrose
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down. For buildings near Fortrose, dealing with all the failing joints at once saves return trips. Send photographs and we will quote for everything together.
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why choose Mastic Doctor in Fortrose
- Fixed quotes based on photos, drawings or a visit
- One contact handling all your sites
- 12 months’ guarantee on every job
- Work to your specification and the manufacturer’s guidance
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Other services in Fortrose
Common questions from Fortrose clients
Will you take on work at estates like Avoch Industrial Estate, close to Fortrose?
Yes, sites like Avoch Industrial Estate are within our area, along with the rest of Fortrose. To start, just call 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Which Scottish guidance covers penetration seals in Fortrose?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Does the weather affect the work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
How do you choose the sealant?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Is the work guaranteed?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.