Fire Stopping in Fearn
Fire-rated and intumescent sealing of service penetrations and linear gaps in Fearn. CHAS accredited and fully insured, with a 12-month guarantee.
- Snag lists that include open service penetrations
- Hidden openings found during inspections
- Improvised or mixed-product fire seals
Fire stopping across Fearn
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Fearn
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in. Site teams most often ask us about openings left by services added after handover and snag lists that include open service penetrations, on service gaps in risers, pipe penetrations and cable penetrations. Whether you call it commercial sealant work, mastic application or joint sealing, in Fearn it comes down to the same thing: the right product in a properly prepared joint.
Travel to smaller places like Fearn is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Location
- Fearn (IV20)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Fire-rated sealing for Fearn buildings
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For a unit at a site such as Cadboll Industrial Estate, 2 miles east of Fearn, new power or data runs between office and warehouse can breach a compartment wall.
Fearn is about 13 miles north of Nairn, in Highland. Looking for fire stopping in Fearn? We can help. Fearn is one of 256 places we cover in Highland. Aberdeen is covered too, around 80 miles from Fearn.
Postcode districts covered here: IV20. Just outside Fearn, we also work in Hill of Fearn (1 mile north-west), Loans of Tullich (1 mile south-east), Balintore (2 miles south-east), Shandwick (2 miles south-east) and Arabella (2 miles south-west). Bigger towns within reach include Nairn (13 miles south), Tain (5 miles north-west), Alness (12 miles south-west), Dornoch (8 miles north), Invergordon (10 miles south-west) and Fortrose (15 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you ring 01277 525 020 or send photos by email.
Around Fearn
The nearest railway station is Fearn station, about 1.5 miles west of the centre. Nearby you will also find Milntown Castle (4.7 miles south-west). Open spaces near Fearn include Loch Eye.
Towns and villages near Fearn
Other services in Fearn
Honest limits
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Gaps in walls that were never built as compartment walls
- Fire doors, dampers or other fire safety equipment
- Writing the fire-stopping specification
If in doubt, phone 01277 525 020 or email us and we will say what we think before you book.
Surfaces we seal
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers
When to bring in a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
How a job runs
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For work around Fearn, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
- Point out any areas we must not close
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to call 01277 525 020 or use the quote form.
Related advice
What we’re called out for in Fearn
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
It’s worth sending us details if you spot any of the following:
- Non-fire-rated filler around services
- Head-of-wall gaps with no fire seal
- Fire sealant pulled out of the opening
- Hidden openings found during inspections
Hotels like Fearn Hotel, under half a mile west of Fearn, are refurbished in phases, and each phase can open up compartment walls.
Before you book anyone
- Proof of insurance
- Whether old or failed sealant will be cut out, not overlaid
- Who will actually carry out the work
- The terms of the workmanship guarantee
FAQs: Fearn
Is Fearn too far out for you?
Not at all. Fearn is within our area. Our area covers all of Scotland, cities, towns and islands alike. Good photographs up front let us bring everything on the first visit.
How do Scotland’s building standards affect fire-rated sealant in Fearn?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Can you quote from photos?
Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
What sets the cost
A fixed quote reflects the actual work. It takes account of:
- Access and working height
- Whether old sealant has to be cut out first
- Phasing around occupants
- Which sealant the job calls for
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Before you send an enquiry
A few photos plus some basic facts will normally do. Please tell us:
- Access details, including height
- Drawings or a marked-up plan, if available
- Photos of the joints, close up and from further back
- Where the site is, with the postcode
For a fixed quote, call 01277 525 020 or send photos by email with the site address and an outline of the work. You can also send details through our quote form.
Surface by surface
Risers and ceiling voids
Voids hide a lot of unsealed openings. We follow your schedule area by area.
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail, so we check each one.