Fire Stopping in Rahane
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Rahane and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Penetration schedules that need working through
- Openings left by services added after handover
- Non-fire-rated filler around services
Fire stopping across Rahane
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Deciding what a wall or floor needs, which belongs to the designer
- Fire doors, dampers or other fire safety equipment
- Issuing fire ratings or certificates for seals
Not sure which it is? You can speak to us on 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
Fire stopping in Rahane, done properly
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it, matching the product and detail it names. With no specification in place, the first step sits with your designer or fire engineer, not with us. Most enquiries involve snag lists that include open service penetrations and fire sealant pulled out of the opening, on linear gaps at wall heads, pipe penetrations and joints between fire-resisting walls and floors. Facilities teams, main contractors and managing agents in Rahane tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Hotels and care homes around smaller places like Rahane often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Rahane (G84)
- Region
- Argyll and Bute
- Guarantee
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Jobs near Rahane are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Flag any permit to work we’ll need
- Tell us which areas need to stay in use
- Send your site hours and access windows
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call 01277 525 020 or use the quote form.
Advice
Leave it or put it right?
Open penetrations multiply: each new service adds to the list. A schedule that is dealt with regularly stays manageable and avoids a much larger catch-up later. For buildings near Rahane, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why clients in Rahane choose us
- Old sealant cut out, never sealed over
- Sealing commercial buildings since 2005
- A Constructionline member, so easy to vet
- Fully insured, including public liability cover
Take a look at our cost guide and our accreditations.
Also near Rahane
What else we do in Rahane
Rahane: questions and answers
How do Scotland’s building standards affect fire-rated sealant in Rahane?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is Rahane too small for you to travel to?
No. Places such as Rahane are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
General trades versus a specialist
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Where services cross fire walls in Rahane
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail.
For buildings in and around Rahane, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Rahane is about 5 miles north-west of Helensburgh, in Argyll and Bute. Across the G84 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Across Argyll and Bute, 124 places are covered, Rahane among them. Our Glasgow page has more on work in that area (25 miles or so).
We take on service penetrations across the G84 postcode area, for business premises of every kind. For a building on Rosneath Road and Peaton Road or nearby, we can quote for service penetrations. Nearby places we also cover include Mambeg (1 mile north), Coulport (1 mile west), Ardpeaton (2 miles south-west), Clynder (2 miles south-east) and Garelochhead (3 miles north). Nearby towns on our patch include Helensburgh (5 miles south-east), Dunoon (7 miles south-west), Cardross (9 miles south-east), Rhu (3 miles south-east), Sandbank (6 miles south-west) and Innellan (12 miles south-west).
Local landmarks in Rahane
The nearest railway station is Garelochhead station, about 2.3 miles north of the centre. A little further out are Victoria Infirmary (5.5 miles south-east) and Faslane Castle (1.9 miles north-east). Open spaces near Rahane include Clach Bheinn.
When to call us in Rahane
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Things that normally lead to an enquiry:
- Expanding foam used as fire stopping
- Fire stopping installed outside its tested range
- Seals disturbed by maintenance and left open
- Unsealed penetrations discovered above suspended ceilings
Wherever services are added at a hospital such as Victoria Infirmary (5.5 miles south-east of Rahane) the compartment line has to be made good with the specified product.
Questions to ask before you book
- How the existing material will be dealt with
- How joint depth will be controlled
- The named product and why it was chosen
- What site paperwork they can supply
Cost factors for service penetrations
Each job is priced on its own details. The things that drive the figure:
- Site requirements such as inductions and permits
- Distance, for remote addresses
- Quantities, in metres or numbers
- Joint width, depth and condition
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Sending details for a quote
Whether it’s one area or a whole building, these details speed things up:
- When you need the work done
- Photos of the joints, close up and from further back
- Rough lengths or quantities, or drawings if you have them
- The type of building and who uses it
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.