Fire Stopping in Scatsta
Fire stopping in Scatsta, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Unsealed joints where partitions meet the slab
- Snag lists that include open service penetrations
- Seals disturbed by maintenance and left open
Fire stopping across Scatsta
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
For managing agents and facilities managers
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, with CSCS-carded applicators on site.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
How we handle fire stopping in Scatsta
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. Most enquiries involve service penetrations left open after M&E works and unsealed penetrations discovered above suspended ceilings, on joints between fire-resisting walls and floors, service gaps in risers and cable penetrations. Facilities teams, main contractors and managing agents in Scatsta tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Refurbishments in small hotels, schools and care homes around places like Scatsta can leave gaps around new services. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Scatsta (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Why it’s worth doing now in Scatsta
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is typically a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Early resealing prevents it.
A quote for service penetrations depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
Why appoint us
- 12-month guarantee on workmanship
- One number for every site we cover
- Work to your specification and the manufacturer’s guidance
- Public liability insurance in place
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Surface by surface
Drylining partitions
Drylined fire walls are tested in a particular build-up. We check that the product’s detail covers that partition type and board thickness first.
Small ducts
Ducts are only sealed with sealant where the detail allows it. The ductwork, its supports and any dampers are for the ductwork contractor.
Quoting for work in Scatsta
To price the job, we consider:
- How much there is to seal
- Distance, for remote addresses
- Backing rod, priming and other preparation
- Which sealant the job calls for
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Before you send an enquiry
There’s no need for a formal survey. These details are enough to start:
- The product your specification calls for
- What the building is and how it’s used
- Anything awkward about access or site hours
- Clear photographs of the problem areas
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or send photos by email.
Also in Scatsta
What we’re called out for in Scatsta
Some service penetrations were never sealed at all, often hidden above suspended ceilings or behind boxing. They come to light during inspections, refits or when another trade lifts a tile.
Things that normally lead to an enquiry:
- Old intumescent sealant that has split away
- Fire-stopping items raised at inspection or handover
- Builders’ foam or ordinary silicone in compartment walls
- Damaged fire seals in risers and voids
Around Scatsta, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Comparing quotes
- Proof of insurance
- The terms of the workmanship guarantee
- Are they CHAS accredited or on Constructionline?
- How the joint faces will be prepared and primed
Our process
Occupied buildings need a little choreography. We sign and contain the area we’re in, keep walkways clear and work section by section so the rest of the building stays in use. Tell us who will meet us and how to get in at your building near Scatsta. We’ll confirm the plan with the fixed quote.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Confirm the product named in the specification
- Flag any permit to work we will need
- Move anything stored against the joints
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or email us.
Read more
Questions about Scatsta
What do Scotland’s building standards say about service penetrations in Scatsta?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Do you design the fire stopping for buildings in Scatsta?
No. The designer or fire engineer sets the detail and building control accepts it. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Can the building stay open while you work?
Yes, as long as we plan it. Tell us your site hours and access windows and we will plan around them.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we will plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
What do you charge?
Every job gets its own fixed quote. For yours, ring 01277 525 020 or email a schedule or drawings with a description of the work.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
Compartment walls and floors in Scatsta
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. For an island location such as Scatsta, work is planned around ferry crossings and the weather. Photos of each opening and the specification mean the right products make the trip.
Wherever the building is near Scatsta, design and sign-off of fire stopping sit with the designer, fire engineer or building control; we install what has been specified.
Scatsta is in the Shetland Islands. We send applicators to Scatsta for service penetrations. We work across 63 places in the Shetland Islands, large and small.
Anyone looking for fire stopping in ZE2 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Main routes into Scatsta include the B9076. Nearby places we also cover include Sullom (2 miles west), Brae (3 miles south-west), Firth (4 miles east), Mossbank (4 miles north-east) and Hogaland (5 miles north-west) for service penetrations. Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call the office on 01277 525 020 or email us.
Near you in Scatsta
The countryside around Scatsta includes Otter Loch.