Bishopbriggs fire stopping
Work needed on a service penetration in Bishopbriggs? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Builders’ foam or ordinary silicone in compartment walls
- Hidden openings found during inspections
- Old intumescent sealant that has split away
Fire stopping near Bishopbriggs
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Bishopbriggs
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, and they are easy to forget. Those on your schedule are closed with the specified product. Site teams most often ask us about fire seals cut back for extra cables and never reinstated and seals that don’t match their tested detail, on service gaps in risers, joints between fire-resisting walls and floors and linear gaps at wall heads. A specialist sealant contractor works differently from a general builder: in Bishopbriggs, that means joint design, primers and backing rod as standard.
In a Scottish town such as Bishopbriggs, buildings with compartment walls include schools, health centres, care homes and offices. Scotland’s building standards expect service penetrations to keep the wall or floor’s fire resistance, so the seal must match a tested detail.
A 12-month guarantee applies to all our work in East Dunbartonshire. Should something we installed fail, call 01277 525 020 or send details through our quote form and we will come back to it.
- Where
- Bishopbriggs (G64)
- Wider area
- East Dunbartonshire
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
When to bring in a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
What we can’t put right
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Issuing fire ratings or certificates for seals
- Large openings beyond what any sealant detail covers
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you’re not sure, just give us a call on 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Where we work in Bishopbriggs
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
Also near Bishopbriggs
What else we do in Bishopbriggs
How a job runs
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. If you manage more than one building in Bishopbriggs, they can be grouped, with one quote. Share your working hours and access arrangements and we will fit in.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Getting the site ready
- Share the asbestos register for older buildings
- Explain the parking and delivery arrangements
- Move anything stored against the joints
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or email drawings and photos with what you know.
Related advice
Building owners, agents and FMs in Bishopbriggs
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
Bishopbriggs: questions and answers
Would you work within a site like Stobhill Hospital?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
Will you plan work around the academic year at somewhere like University of Strathclyde?
Yes. We plan campus work around teaching, exams and residence turnarounds. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Who decides which product is used?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Do the same rules apply to fire stopping in Scotland?
Our work covers Greater London, the South East and every Scottish council area. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook says service penetrations should keep at least the fire resistance of the wall or floor.
Do you cover Bishopbriggs?
Yes. We cover Bishopbriggs, and you can call the office on 01277 525 020 or send details through our quote form to get started.
Is BS 476 being phased out?
For buildings in England, Approved Document B removes BS 476 references from 2 September 2029. Products are then judged on BS EN 13501-2 classifications. In Scotland, the Technical Handbook sets its own guidance, with clause 2.1.14 covering service penetrations.
What will the job cost?
That depends on the job: quantities, access, the product and any phasing. Call for a quote and we will price it properly.
Aftercare for building managers
Cleaning and maintenance staff play a part too. Pass these on to them:
- Brief every trade that openings they make must be sealed
- Record which product was used where
- Check risers and ceiling voids after each round of works
- Arrange inspection before areas are covered up
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts.
What sets the cost
We price every job individually. The main factors are:
- Travel to remote or island sites
- Whether old sealant has to be cut out first
- How much there is to seal
- Access and working height
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Details that help us quote
However big the job, these details speed things up:
- Anything awkward about access or site hours
- Rough lengths or quantities, or drawings if you have them
- Any dates the work must fit around
- Whether the building will be occupied during the work
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or email drawings and photos.
Service penetrations in Bishopbriggs buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Large healthcare estates like Stobhill Hospital, 1 mile south of Bishopbriggs, change their services often, so penetration seals are worth checking after M&E work. At a university such as University of Strathclyde, 2.5 miles south of Bishopbriggs, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. Older community buildings such as Colston Wellpark Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Bishopbriggs is about 4 miles north-east of Glasgow, in East Dunbartonshire. We cover Bishopbriggs, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across East Dunbartonshire, 24 places are covered, including Bishopbriggs.
Work on service penetrations is covered throughout G64, for business premises of every kind. Streets here include Ruskin Square, Springfield Square and Myrtle Square. Being close to the A803 and B812, Bishopbriggs is easy to get to with materials and equipment. We also cover Cadder (1 mile north), Balmore (2 miles north-west), Torrance (2 miles north), Bardowie (3 miles north-west) and Summerston (3 miles west). Further afield, our area takes in Kirkintilloch (3 miles north-east), Bearsden (5 miles west), Lenzie (3 miles north-east), Milngavie (5 miles north-west), Westerton (5 miles west) and Lennoxtown (5 miles north).
What’s near Bishopbriggs
We work on buildings around Springburn Park. There’s a railway station in Bishopbriggs itself: Bishopbriggs station. A little further out are Chinatown (3.2 miles south-west) and Kirkintilloch Castle (3.1 miles north-east). Open spaces near Bishopbriggs include Lenzie Moss and Gadloch.