Fire Stopping in Connel
Fire-rated and intumescent sealing of service penetrations and linear gaps in Connel. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Old intumescent sealant that has split away
- Service penetrations left open after M&E works
- Fire-stopping items raised at inspection or handover
Fire stopping for businesses in Connel
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Connel: the local picture
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
In a hotel such as Falls of Lora Hotel, which lies east of Connel, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Theatres, wards and plant rooms at sites like Lorn and Islands Hospital, 4.9 miles south-west of Connel, all have compartment walls crossed by services.
Connel (Gaelic: A'Choingheal) is about 40 miles north-west of Helensburgh, in Argyll and Bute. Connel sits inside our coverage and the rest of Argyll and Bute, with the same fixed quotes and 12-month guarantee as everywhere else. Our Argyll and Bute coverage takes in 124 places, large and small. There’s a separate page for Glasgow, about 60 miles away.
If you need fire stopping in PA37, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Among the streets we cover are St Oran's Place, Powell Place and Grosvenor Crescent. Close to Connel, our area also takes in North Connel (1 mile north-west), Black Crofts (2 miles north-east), Ardchattan (2 miles north-east), Dunbeg (2 miles west) and Benderloch (3 miles north). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Near you in Connel
Connel has its own railway station: Connel Ferry station. Well-known places in the area include Lorn and Islands Hospital (4.9 miles south-west) and Dunstaffnage Castle (1.8 miles west). Green spaces nearby include Lochan Dubh.
About our fire stopping in Connel
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. Site teams most often ask us about penetration schedules that need working through and expanding foam used as fire stopping, across linear gaps at wall heads, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. A specialist sealant contractor works differently from a general builder: on jobs in Connel, preparation and product choice get the time they need.
Around smaller places such as Connel, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Connel (PA37)
- Wider area
- Argyll and Bute
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Signs you need fire stopping in Connel
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.
What tends to prompt an enquiry:
- Expanding foam used as fire stopping
- Penetration schedules that need working through
- Old intumescent sealant that has split away
- Damaged fire seals in risers and voids
Halls and meeting rooms at places like St Oran's Church of Scotland sometimes gain new services, and any compartment wall crossed needs the specified seal.
Before you book anyone
- Is the sealant right for the movement and the substrate?
- Will failed sealant be removed rather than covered?
- How the joint faces will be prepared and primed
- What level of public liability insurance do they hold?
FAQs: Connel
Is Connel too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Good photos up front let us bring everything on the first visit.
Is a hospital such as Lorn and Islands Hospital somewhere you can work?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
How many days will you need on site?
It depends on the scope, though a typical visit normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Can you tell us what fire stopping our building needs?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is installing what they specify, to the product’s tested detail.
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Is any job too small?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
How a job runs
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For work around Connel, we aim for one trip, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Let us know about inductions and permits
- Warn occupants and staff about the work
- Make sure the joints can be reached
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
When something else is needed
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Issuing fire ratings or certificates for seals
- Large openings beyond what any sealant detail covers
- Fire risk assessments, a job for a competent assessor
If you are not sure, just call 01277 525 020 or email us and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
What happens if it’s left?
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Connel, a repair visit takes planning, so it’s better to act early.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
Why choose Mastic Doctor in Connel
- Joints cleaned back to sound surfaces
- Over 20 years of commercial sealing
- CHAS accredited contractor
- 12-month guarantee on workmanship
Nearby places to Connel
Other services in Connel
Cost factors for service penetrations
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- Whether old sealant has to be cut out first
- Quantities, in metres or numbers
- Travel to remote or island sites
- The product specified
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Details that help us quote
Whether it’s one area or a whole building, these details speed things up:
- A wide shot and a close-up of the area
- The postcode of the building
- Anything awkward about access or site hours
- Rough lengths or quantities, or drawings if you have them
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or email us.
For managing agents and facilities managers
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Connel can sit alongside others in a wider programme.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.