Fire stopping in Benderloch
Fire-rated and intumescent sealing of service penetrations and linear gaps across Benderloch, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Fire stopping installed outside its tested range
- Openings found when ceilings come down for a refit
- Unsealed joints where partitions meet the slab
Fire stopping for Benderloch sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Benderloch
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, give us a call on 01277 525 020 or email the details over with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. If you’re dealing with fire seals cut back for extra cables and never reinstated and openings found when ceilings come down for a refit, we can help, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Benderloch is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Hotels and care homes around smaller places like Benderloch often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Benderloch (PA37)
- Wider area
- Argyll and Bute
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Benderloch
Is Benderloch too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Will you design a fire-stopping scheme for our building in Benderloch?
No. The designer or fire engineer sets the detail and building control accepts it. We install what’s specified, to the product’s tested detail.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Can you work while the building is occupied?
In the majority of cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Also near Benderloch
Other services in Benderloch
Common problems we fix in Benderloch
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
It’s worth sending us details if you spot any of the following:
- Open linear gaps along the top of fire-resisting walls
- Non-fire-rated filler around services
- Old intumescent sealant that has split away
- Seals disturbed by maintenance and left open
Around Benderloch, fire-stopping design belongs to the designer and building control; installation to the specification is our part.
Before you book anyone
- Are they CHAS accredited or on Constructionline?
- How joint depth will be controlled
- What the guarantee covers, and for how long
- Do they follow the manufacturer’s priming guidance?
What affects the price in Benderloch
Quotes vary with the job. Expect it to depend on:
- Joint width, depth and condition
- How accessible the joints are
- Quantities, in metres or numbers
- Specialist products, such as fire-rated or hygienic sealants
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Before you send an enquiry
There’s no need for a formal survey. A few details are enough to get going:
- Whether the building will be occupied during the work
- Drawings or a marked-up plan, if available
- The site address and postcode
- Anything awkward about access or site hours
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, call 01277 525 020 or email drawings and photos.
Why act early in Benderloch
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Benderloch before they leak.
A quote for service penetrations depends on quantities, condition and access, and any specification that applies. Call for a quote.
What you get with us
- One number for every site we cover
- A fixed quote before work starts
- Our applicators hold CSCS cards
- Fully insured
Read how commercial sealant jobs are priced or our accreditations.
Diagnose, treat, sign off
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Travel to smaller Scottish places like Benderloch is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Move anything stored against the joints
- Warn occupants and staff about the work
- Share your working hours and any access restrictions
Quotes
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Read more
Site staff or a sealant specialist?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Arrange inspection before areas are covered up
- Check risers and ceiling voids after each round of works
- Settle who seals which penetrations at the start of a project
- Keep product data and details in the fire safety file
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there, not months later.
Service penetrations in Benderloch buildings
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
For buildings in and around Benderloch, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Benderloch is in Argyll and Bute. Looking for fire stopping in Benderloch? We can help, as we do across Argyll and Bute. Benderloch is one of 124 places we cover in Argyll and Bute for service penetrations. We also cover Glasgow, some 62 miles away.
Business premises anywhere in PA37 are within our area for service penetrations. We cover commercial and managed buildings on Ceum Dhun Righ, Beinn Lora Drive and Keil Gardens. Close to Benderloch, our area also takes in Ardchattan (2 miles south-east), Black Crofts (2 miles south-east), North Connel (2 miles south), Connel (3 miles south) and Dunbeg (3 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you ring 01277 525 020 or send details through our quote form.
Near you in Benderloch
For rail, the closest station is Connel Ferry station, about 2.7 miles south of the centre. Nearby you will also find Dunstaffnage Castle (2.8 miles south-west). Open spaces near Benderloch include Lochan Dubh.