
Coltness fire stopping
Work needed on a service penetration in Coltness? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Hidden openings found during inspections
- Damaged fire seals in risers and voids
- Expanding foam used as fire stopping
Fire stopping for Coltness sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Coltness, done properly
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. We work on service gaps in risers, small duct penetrations where the tested detail allows and pipe penetrations, and the usual reasons a site gets in touch are unsealed openings around new pipes and cables and improvised or mixed-product fire seals. Facilities teams, main contractors and managing agents in Coltness tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Refurbishments in small hotels, schools and care homes around places like Coltness can leave gaps around new services. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Coltness (ML2, ML1)
- Wider area
- North Lanarkshire
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026

When to call us in Coltness
Some service penetrations were never sealed at all because they sat out of sight above a ceiling or inside a riser. They come to light during inspections, refits or when another trade lifts a tile.
Most enquiries start with something like this:
- Snag lists that include open service penetrations
- Unsealed penetrations discovered above suspended ceilings
- Open linear gaps along the top of fire-resisting walls
- Fire-rated sealant that has cracked or shrunk back
At a college such as New College Lanarkshire - Motherwell Campus (2.1 miles west of Coltness), checking penetration seals after summer M&E works is good practice.
What to look for in a quote
- Their public liability cover
- Who will actually carry out the work
- How they’ll work around occupants
- The terms of the workmanship guarantee
Nearby places to Coltness
Other services in Coltness
Diagnose, treat, sign off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For work around Coltness, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Send your site hours and access windows
- Tell staff and tenants when we will be in
Quotes
To get a fixed quote, call the office on 01277 525 020 or email us with the site address and an outline of the work. Our quote form is another easy route.
Read more
What affects the price in Coltness
These are the things that shape the price:
- Travel to remote or island sites
- How accessible the joints are
- The product specified
- The total length or number of joints
Pricing service penetrations depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- Any specification or named product
- Photos of the joints, close up and from further back
- Whether an asbestos survey exists
- Your programme or deadline
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Service penetrations in Coltness buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. We install fire-rated sealant to that tested detail where it is specified.
For a school such as St. Aidan's Primary School, penetration sealing fits best at the end of the summer works. Large healthcare estates like Cleland Hospital (0.9 miles north of Coltness) change their services often, so penetration seals are worth checking after M&E work.
Coltness is about 1 mile north of Wishaw, in North Lanarkshire. Our applicators travel to Coltness for work on service penetrations. 100 places across North Lanarkshire fall within our area, including Coltness. There’s a separate page for Glasgow, roughly 15 miles from Coltness.
Postcode districts covered here: ML2 and ML1 for service penetrations. For a building on Banchory Road, Coltness Road and Linden Avenue or nearby, send details and we will quote for service penetrations. Just outside Coltness, we also work in Wishaw (1 mile south), Dimsdale (2 miles south), Pather (2 miles south), Netherton (2 miles south-west) and Ravenscraig (2 miles west). Further afield, our area takes in Motherwell (3 miles west), Cumbernauld (12 miles north), Coatbridge (6 miles north-west), Airdrie (6 miles north-west), Bellshill (5 miles north-west) and Kilsyth (14 miles north-west).
Landmarks near Coltness
Recent enquiries here include premises near Coltness High School, among other places. The nearest railway station is Cleland station, roughly 1 mile north of the centre. Other landmarks nearby include Murdostoun Castle (1.5 miles east) and Cleland Hospital (0.9 miles north). The countryside around Coltness includes Baron's Haugh RSPB Reserve and Allanton House lake.
Owners, agents and contractors
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Coltness can sit alongside others in a wider programme.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Why deal with it now?
The longer openings stay, the more there tend to be: each new service adds to the list. A schedule that is dealt with regularly stays manageable and avoids a much larger catch-up later. Renewing every failing joint on one visit is the sensible approach for a place like Coltness. Send photographs and we’ll quote for everything together.
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- Fixed quotes based on photos, drawings or a visit
- Public liability insurance in place
- Workmanship guaranteed for 12 months
- One number for every site we cover
Read what affects the cost and our accreditations and insurance.
When it isn’t the sealant
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Signing off or certifying a building’s fire stopping
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Fire doors, dampers or other fire safety equipment
If you’re not sure, just call the office on 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
Where we work in Coltness
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Service gaps in risers
Questions about Coltness
Will you take on work at estates like Netherton Industrial Estate, close to Coltness?
Yes. Estates, retail parks and business parks around Coltness, Netherton Industrial Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
How do Scotland’s building standards affect fire-rated sealant in Coltness?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
Are you CHAS accredited?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can the sealant be colour-matched?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Do you seal on top of existing sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.