Fire-rated sealing and fire stopping in Braeside, Aberdeen
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Braeside. Send details for a fixed quote.
- Hidden openings found during inspections
- Head-of-wall gaps with no fire seal
- Unsealed openings around new pipes and cables
Fire stopping near Braeside
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire-rated sealing for Braeside buildings
Plenty of hotels sit less than 2 miles from Braeside. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Braeside has eight care or nursing homes no more than 2 miles away. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product.
At a retail site such as Garthdee Retail Park, 1 mile south-east of Braeside, walls between units may be fire-resisting, so services added in a refit need the specified seal. Older community buildings such as Mannofield Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Braeside is about 2 miles south-west of Aberdeen, in Aberdeen. Braeside sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Braeside is one of 40 places in Aberdeen on our list for service penetrations.
Commercial sites across AB15 and AB10 are covered for service penetrations. Among the streets we cover are Gordon Road, Gordon Lane and New Fox Lane, and sites on any of them can send details for a fixed quote. Close to Braeside, our area also takes in West End (1 mile north-east), Craigiebuckler (1 mile north-west), Garthdee (1 mile south-east), Broomhill (1 mile east) and Kaimhill (1 mile south-east). A short drive away, we cover Dyce (5 miles north), Tillydrone (3 miles north-east), Donside Village (3 miles north-east), Cove Bay (3 miles south-east), Danestone (3 miles north) and Bucksburn (3 miles north). Braeside ranks among the main centres of Aberdeen, with offices, shops, schools and other public and commercial buildings.
What’s near Braeside
In Braeside, that means premises near Hazlehead Park and Albyn School. For rail, the closest station is Aberdeen station, roughly 2 miles north-east. Other landmarks nearby include Gordon Highlanders Museum (0.5 miles north) and Woodend Hospital (1.6 miles north-west). For a walk, there’s Kincorth Hill and Rubislaw Quarry.
Fire stopping in Braeside, done properly
Facilities managers in Braeside often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. We work on small duct penetrations where the tested detail allows, service gaps in risers and pipe penetrations, and what we are called in for most is unsealed penetrations discovered above suspended ceilings and head-of-wall gaps with no fire seal. Most enquiries from Braeside start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Large city estates in Scotland, from universities to hospitals and offices, are re-serviced constantly, and each new run of cable or pipe through a compartment wall needs sealing. Intumescent sealant goes in where the specification calls for it, with backing and depth as tested.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Braeside (AB15, AB10)
- Region
- Aberdeen
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Your questions answered
Does your area include sites such as Garthdee Retail Park, near Braeside?
Yes. We cover Braeside and the area around it, including industrial estates, business parks and retail parks such as Garthdee Retail Park. A few photos and the unit address let us price the work.
Can you work in a care home near Braeside with residents in?
Yes. We agree rooms and times with the manager and work a few areas at a time. Tell us about any infection-control or safeguarding requirements and we will work to them.
Will you sign off the seals for us?
No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. We work to the specification and the manufacturer’s installation guidance, and any records you need can be confirmed with the quote.
Can you tell us what fire stopping our building needs?
No, we don’t design fire stopping. Once you have a specification, we can price and install the sealant elements of it.
Who decides which product is used?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Quoting for work in Braeside
We price every job individually. The things that drive the figure:
- Phasing around occupants
- Induction, permit and paperwork requirements
- Location, for remote and island sites
- The total length or number of joints
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Before you send an enquiry
The more we know, the firmer the quote. When you get in touch, include:
- The type of building and who uses it
- The site address and postcode
- Approximate linear metres or a joint schedule
- When you need the work done
To get a fixed quote, speak to us on 01277 525 020 or email the details over. You can also send details through our quote form.
What the job involves on each surface
Metal pipes
Heat travels along metal pipework. We follow whatever the detail requires and flag anything we can’t match.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. Bundle size, cable type and the space between cables all matter and we work within those limits.
What else we do in Braeside
Do you need fire stopping in Braeside?
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
Most enquiries start with something like this:
- Snag lists that include open service penetrations
- Non-fire-rated filler around services
- Unsealed penetrations discovered above suspended ceilings
- Head-of-wall gaps with no fire seal
Wherever services are added at a hospital such as Albyn Hospital, 1.4 miles north-east of Braeside, the compartment line has to be made good with the specified product.
Comparing quotes
- Who will actually carry out the work
- The named product and why it was chosen
- What site paperwork they can supply
- Do they follow the manufacturer’s priming guidance?
Our process
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you. In a Scottish city, kerbside space and loading need planning, especially near the centre. Shared closes, stairs and the property factor may need to be part of the plan.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Let us know about inductions and permits
- Send any specification or drawings in advance
- Agree which areas must stay open
Quotes
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, phone 01277 525 020 or send photos by email.
Read more
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Honest limits
Honesty saves time and money. Fresh joints won’t solve:
- Openings that need collars, wraps, batts or boards rather than sealant
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Signing off or certifying a building’s fire stopping
If in doubt, ring 01277 525 020 or email the details over and we’ll say what we think before you book.
What we seal
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Cable penetrations