Fire stopping in Donside Village
Fire stopping in Donside Village, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Penetration schedules that need working through
- Unsealed penetrations discovered above suspended ceilings
Fire stopping for businesses in Donside Village
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Donside Village
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. If you are dealing with old intumescent sealant that has split away and unsealed joints where partitions meet the slab, we can help, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Donside Village is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Tenement blocks and converted stone buildings in Scottish cities often hide old service routes through walls and floors. Before sealing, we confirm the wall or floor and the services passing through, so the product matches the detail.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant.
- Place
- Donside Village (AB24, AB22, AB23)
- Wider area
- Aberdeen
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Give us the access times and building rules for your premises in Donside Village, and we’ll plan the work to suit, phased where areas need to stay in use.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Flag any permit to work we will need
- Share the asbestos register for older buildings
- Send your site hours and access windows
Quotes
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Read more
Nearby places to Donside Village
Other services in Donside Village
Service penetrations in Donside Village buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail. A 2-mile radius around Donside Village takes in plenty of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Hotels like Northern Hotel (0.8 miles south of Donside Village) are refurbished in phases, and each phase can open up compartment walls. Older community buildings such as St Joseph's Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Donside Village is about 1 mile north of Aberdeen, in Aberdeen. Commercial clients in Donside Village use us for work on service penetrations, as part of our coverage of Aberdeen. 40 places across Aberdeen fall within our area, including Donside Village.
Commercial sites across AB24, AB22 and AB23 are covered. For a building on Gort Road, Hayton Road and Tedder Road or nearby, we can quote for service penetrations. Sites close to Donside Village are covered too, including Tillydrone (1 mile south-west), Danestone (1 mile north-west), Berryden (1 mile south), Cornhill (1 mile south-west) and Aberdeen (1 mile south). A short drive away, we cover Ferryhill (3 miles south), Dyce (4 miles north-west), Cults (5 miles south-west), Braeside (3 miles south-west), Cove Bay (5 miles south) and West End (3 miles south).
Around Donside Village
Recent enquiries here include premises near Bridge of Don Academy, Library and St Peter's RC Primary School, among other places. Nearby too are Seaton Park (under half a mile south-east) and 97 High Street pub (0.7 miles south-east). For rail, the closest station is Aberdeen station, about 2.3 miles south of the centre. Well-known places in the area include Bishop Dunbar's Hospital (under half a mile south-east) and Bon Accord Centre (1.8 miles south). For a walk, there’s Gallows Hill and Rubislaw Quarry.
Doing it in-house
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Honest limits
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Writing the fire-stopping specification
- Gaps in walls that were never built as compartment walls
- Fire doors, dampers or other fire safety equipment
Not sure which it is? You can ring 01277 525 020 or send details through our quote form and we will tell you honestly.
Surfaces we seal
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
Do you need fire stopping in Donside Village?
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is when untested combinations creep in and later need putting right.
Any of the following is a good reason to get the joints checked over:
- Damaged fire seals in risers and voids
- Fire sealant pulled out of the opening
- Hidden openings found during inspections
- Unsealed openings around new pipes and cables
Wherever services are added at a hospital such as Royal Cornhill Hospital (to the south of Donside Village) the compartment line has to be made good with the specified product.
Questions to ask before you book
- What level of public liability insurance do they hold?
- Will failed sealant be removed rather than covered?
- How long is the guarantee, and what does it include?
- Will RAMS and insurance details be available?
Questions we are asked in Donside Village
Can you seal around new services in a hotel near Donside Village?
Yes, where the specification calls for fire-rated sealant. Each seal follows the tested detail, and rooms are done in turn.
Is Aberdeen Innovation Park, near Donside Village, within your area?
Yes. We cover Donside Village and the area around it, including industrial estates, business parks and retail parks such as Aberdeen Innovation Park. To start, just phone 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Is colour matching possible?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
How long does a typical visit take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Can staff carry on working while you’re here?
In most cases, yes. We phase the work so most of the building stays in use.
Can weather delay the job?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Put resealing into every M&E and fit-out package
- Arrange inspection before areas are covered up
- Record which product was used where
- Foam or ordinary sealant is never a fire-seal repair
Allow the manufacturer’s stated cure time before boxing in or decorating. Some fire-rated sealants accept paint and some don’t, so check the product data first.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Donside Village can sit alongside others in a wider programme.