Expansion Joint Sealing in Blairdardie
Planning work on a movement joint in Blairdardie? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Expansion joints split through the centre of the bead
- Arrises breaking up along floor joints
- Car park joints leaking onto vehicles below
Expansion joint sealing for Blairdardie sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Expansion joint sealing in Blairdardie
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability while depth is limited by backing rod or, in shallow joints, a bond-breaker. For wider joints, many sealant makers recommend a width-to-depth ratio, often around 2:1. We work on brickwork movement joints, podiums and floor movement joints and cladding panel joints, and the failures we’re asked to look at most are leaks through car park deck joints onto the level below and layers of sealant in a movement joint. Facilities teams, main contractors and managing agents in Blairdardie tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around the edges of Scotland’s cities are warehouses, trade counters and distribution units, whose floor joints take forklift and pallet-truck traffic daily. We work in phases with a product suited to the traffic, so operations carry on.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Blairdardie (G13, G15, G61)
- Wider area
- Glasgow
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Cost factors for movement joints
The price varies from site to site. It mainly depends on:
- Distance, for remote addresses
- The site’s rules and procedures
- Working within restricted access windows
- Access and working height
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- The asbestos register, for older buildings
- Any specification or named product
- What the building is and how it’s used
- Photos of the joints, close up and from further back
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
What the job involves on each surface
Brickwork and blockwork joints
Long brick and block elevations have movement joints at intervals. They take a low-modulus sealant with a movement class to suit.
Joints between different materials
Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement priming where the maker calls for it.
Questions about Blairdardie
Can you work at a site such as Great Western Retail Park, by Blairdardie?
Yes. Our area takes in Blairdardie and its surroundings, with estates and business parks such as Great Western Retail Park included. Send details of the unit and the work through our quote form for a quick quote.
Will our site in Blairdardie have to close for joint sealing?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
What sealant do you use in movement joints?
We choose a sealant with a movement capability that suits the joint as set out in BS EN ISO 11600. Hybrid or MS polymer products suit some mixed-material joints.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Slabs, ramps and loading bays in Blairdardie
Less than 3 miles from Blairdardie there are at least three named estates and business parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Blairdardie is on Scotland’s wetter western side. Open joints in external slabs take a lot of water. Outside joints are sealed in dry spells, so dates have some give.
Across sites such as Anniesland Industrial Estate (1.1 miles east of Blairdardie), floor and movement joints can be sealed in phases so units keep working. For a store at a site such as Great Western Retail Park, which lies west of Blairdardie, the service yard and goods-in area are where joints break down first.
Blairdardie is about 2 miles south-west of Bearsden, in Glasgow. Across the G13 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Blairdardie is one of 171 places we cover in Glasgow.
Work on movement joints is covered throughout G13, G15 and G61, for business premises of every kind. If your site is on Mace Road, Fruin Road and Manor Road or close by, send details and we will quote for movement joints. We also cover Drumchapel (1 mile north-west), Old Drumchapel (1 mile west), Westerton (1 mile north-east), Linnvale (1 mile west) and Drumry (1 mile west) for movement joints. A short drive away, we cover Glasgow (5 miles south-east), Hillhead (3 miles south-east), Dowanhill (3 miles south-east), Woodlands (4 miles south-east), Woodside (4 miles south-east) and North Kelvinside (3 miles south-east).
Local landmarks in Blairdardie
We work on buildings around Jordanhill College and Dawsholm Park, among other places. There’s a railway station in Blairdardie itself: Drumchapel station. Well-known places in the area include Drumchapel Hospital (less than half a mile north) and Braehead (1.8 miles south). The countryside around Blairdardie includes Castle Hill and Kilmardinny.
Towns and villages near Blairdardie
What else we do in Blairdardie
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Give us the access times and building rules for your premises in Blairdardie, so the work can be phased and areas kept in use.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Getting the site ready
- Let us know about inductions and permits
- Point out parking and an unloading spot
- Point out any areas we must not close
Get a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or send details through our quote form.
Advice
What we can’t put right
Before quoting, we check that sealant is the right answer. It won’t put right:
- Concrete or masonry repairs along the arrises
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
If in doubt, speak to us on 01277 525 020 or send details through our quote form and we will say what we think.
What we seal
- Podiums and floor movement joints
- Blockwork control joints
- Precast concrete panel joints
- Cladding panel joints
- Brickwork movement joints
- Car park decks and ramps
When to call us in Blairdardie
With no backing rod or bond-breaker in place, sealant grips the base of the joint too. Bonded on three faces, it can’t stretch evenly when the joint opens.
Look out for the following:
- Leaks through car park deck joints onto the level below
- Layers of sealant in a movement joint
- Movement joints with split or torn sealant
- Debris jammed in movement joints
Campuses like University of Glasgow Garscube Campus, 1.7 miles east of Blairdardie, mix old and new buildings, with movement joints wherever they meet.
Comparing quotes
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Their public liability cover
- Will CSCS-carded applicators be on site?
- Health and safety accreditation such as CHAS