Fire Stopping in Axmansford
Need fire stopping in Axmansford? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Unsealed penetrations discovered above suspended ceilings
- Openings left by services added after handover
- Expanding foam used as fire stopping
Fire stopping for businesses in Axmansford
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Axmansford, done properly
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. Site teams most often ask us about open linear gaps along the top of fire-resisting walls and non-fire-rated filler around services, on pipe penetrations, service gaps in risers and linear gaps at wall heads. For commercial sealant work in Axmansford, you deal with one contact from quote to sign-off, whether it’s one building or several.
Rural conversions around Axmansford can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
A 12-month guarantee applies to all our work. Should something we installed fail, speak to us on 01277 525 020 or send photos by email and we’ll come back to it.
- Where
- Axmansford (RG26)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Fire risk assessments, a job for a competent assessor
- Signing off or certifying a building’s fire stopping
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just ring 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Service gaps in risers
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
What happens if it’s left?
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed, so earlier action pays back. Around Axmansford, it’s better to renew all the failing joints at once. Send photos of each area and we will quote for the lot.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Why appoint us
- One contact handling all your sites
- Public liability insurance in place
- Health and safety: CHAS accredited
- Old sealant cut out, never sealed over
Take a look at how commercial sealant jobs are priced or how we’re accredited.
Do you need fire stopping in Axmansford?
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls.
These are often picked up first by site or facilities staff:
- Openings found when ceilings come down for a refit
- Seals disturbed by maintenance and left open
- Service penetrations left open after M&E works
- Fire sealant pulled out of the opening
Schools such as The Hurst School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Comparing quotes
- Whether primer will be used where the manufacturer specifies it
- Are they CHAS accredited or on Constructionline?
- What level of public liability insurance do they hold?
- Whether their applicators hold CSCS cards
Different surfaces, different methods
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement.
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products.
Where services cross fire walls in Axmansford
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Axmansford lies roughly 48 miles out from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls; the gaps need the specified seal.
Older community buildings such as Church of St Stephen that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Tenant changes at parks like Scion Business Park, 1.2 miles to the north of Axmansford, bring new data and services, and openings through fire-resisting walls need the specified seal.
Axmansford is about 2 miles west of Tadley, in Hampshire. Any commercial site in Axmansford is covered, whether it’s a single job or part of a planned programme. Axmansford is one of 723 places we cover in Hampshire for service penetrations. There’s a separate page for Reading, about 11 miles away.
Work on service penetrations is covered throughout RG26, for business premises of every kind. If your building is just outside Axmansford, we cover Inhurst (1 mile north), Baughurst (1 mile north-east), Heath End (1 mile north-east), Wolverton Common (1 mile south-west) and Brimpton Common (1 mile north). Nearby towns on our patch include Basingstoke (7 miles south-east), Yateley (15 miles east), Hook (11 miles south-east), Popley (6 miles south-east), Kempshott (7 miles south) and Oakridge (7 miles south-east).
Around Axmansford
We work on buildings around Wellington Arms Public House and Ashford Hill Primary School, among other places. The closest station to Axmansford is Midgham station, about 3.4 miles north of the centre. Well-known places in the area include Park Prewett Hospital (5.3 miles south-east) and Calleva Museum (3.6 miles east).
How a job runs
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. If others near Axmansford need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Tell us which areas need to stay in use
- Tell us your opening times and when work is allowed
- Move anything stored against the joints
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or email a schedule or drawings.
Read more
After the work
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Ask the designer to confirm details early on refits
- Put resealing into every M&E and fit-out package
- Treat an open penetration as a priority repair
- Look above ceilings when tiles are lifted for other jobs
Allow the manufacturer’s stated cure time before boxing in or decorating. Not every fire-rated product can be painted.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there, not months later.
Common questions from Axmansford clients
How does the move away from BS 476 affect penetration seals in Axmansford?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Would you work within a site like Park Prewett Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we will plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Will you come and look before quoting?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit.