Fire-rated sealing and fire stopping in Heath End, Hampshire
Fire-rated and intumescent sealing of service penetrations and linear gaps across Heath End, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Penetration schedules that need working through
- Non-fire-rated filler around services
- Fire-rated sealant that has cracked or shrunk back
Fire stopping in Heath End
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Heath End, done properly
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it. Where there isn’t one, the designer or fire engineer needs to set one first. Most enquiries involve damaged fire seals in risers and voids and old intumescent sealant that has split away, on linear gaps at wall heads, cable penetrations and pipe penetrations. A single leaking joint is often how a building in Heath End first comes to us: we look at the rest while we’re there and tell you what we find.
For a smaller site near Heath End, we plan to do all the penetrations in one go, with the specification and photographs sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Heath End (RG26, RG7)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Also near Heath End
What else we do in Heath End
After the work
Your facilities or cleaning team can help the joints last. Share these points with them:
- Foam or ordinary sealant is never a fire-seal repair
- File the specified details where the next contractor can find them
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Look above ceilings when tiles are lifted for other jobs
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small compared with dozens found at once.
From enquiry to sign-off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. Smaller jobs around Heath End can be grouped with others nearby, which keeps travel down. You’ll have a fixed quote before work starts.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Preparing the site
- Let us know about inductions and permits
- Point out parking and an unloading spot
- Tell staff and tenants when we will be in
Request a quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, phone 01277 525 020 or email the details over.
Advice
Compartment walls and floors in Heath End
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Several hotels sit less than 2 miles from Heath End. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
For a school such as The Hurst School, penetration sealing fits best at the end of the summer works. For a building such as Saint Mary's Church, new heating or data runs are the usual reason penetrations need sealing. On a hospital site such as Park Prewett Hospital, which lies south-east of Heath End, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Heath End is about 1 mile west of Tadley, in Hampshire. Commercial clients in Heath End can call on us for service penetrations. Our Hampshire coverage takes in 723 places. Sites around Reading have their own page, about 10 miles away.
We take on service penetrations across the RG26 and RG7 postcode area, for business premises of every kind. We cover commercial and managed buildings on Ash Lane, Pinks Lane and Stokes Lane and the roads nearby. We also cover Inhurst (1 mile south-west), Baughurst (1 mile south), Brimpton Common (1 mile north-west), Axmansford (1 mile south-west) and Tadley (1 mile east) for service penetrations. Bigger towns within reach include Basingstoke (7 miles south-east), Yateley (15 miles east), Hook (11 miles south-east), Popley (6 miles south-east), Kempshott (8 miles south) and Oakridge (7 miles south-east).
Near you in Heath End
In Heath End, that means premises near Burnham Copse Primary School, among other places. Heath End’s nearest station is Midgham station, about 2.6 miles north. Nearby you will also find Calleva Museum (3.2 miles east) and Park Prewett Hospital (5.9 miles south-east).
What the job involves on each surface
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail.
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. The specified product and backing for that movement are what goes in.
Common questions from Heath End clients
Can you seal penetrations in a hotel in Heath End after a refit?
Yes, where fire-rated sealant is the specified product. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Would you work within a site like Park Prewett Hospital?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
Do you have public liability insurance?
Yes. We’re fully insured, including public liability cover.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
What about RAMS and site documents?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Do you offer coloured sealant?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Can staff carry on working while you’re here?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Commercial clients in Heath End
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
When something else is needed
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Fire risk assessments, a job for a competent assessor
- Openings that need collars, wraps, batts or boards rather than sealant
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just speak to us on 01277 525 020 or email the details over and we will give you a straight answer before you book.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers