Wolverton Common fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Wolverton Common and the surrounding area. Send photographs or drawings for a fixed quote.
- Builders’ foam or ordinary silicone in compartment walls
- Fire-rated sealant that has cracked or shrunk back
- Improvised or mixed-product fire seals
Need fire stopping in Wolverton Common?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
When to call us in Wolverton Common
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. The opening looks sealed but has no fire test evidence behind it, so it has to come out.
If one of these sounds familiar, it’s time for a closer look:
- Damaged fire seals in risers and voids
- Unsealed joints where partitions meet the slab
- Unsealed openings around new pipes and cables
- Improvised or mixed-product fire seals
Holiday works at schools like The Hurst School often leave service openings to seal before pupils return.
Comparing quotes
- The named product and why it was chosen
- How the joint faces will be prepared and primed
- What site paperwork they can supply
- Will CSCS-carded applicators be on site?
How we handle fire stopping in Wolverton Common
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. If you have builders’ foam or ordinary silicone in compartment walls and fire-rated sealant that has cracked or shrunk back, we can help. For commercial sealant work in Wolverton Common, you deal with one contact from quote to sign-off, whether it’s one building or several.
Smaller places such as Wolverton Common still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Where
- Wolverton Common (RG26)
- Region
- Hampshire
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
How a job runs
Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Jobs in and around smaller places like Wolverton Common are normally planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Let building users know which areas are affected
- Send asbestos survey details if the building is pre-2000
- Arrange parking or a loading space
Request a quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, call the office on 01277 525 020 or email drawings and photos.
Related advice
Why act early in Wolverton Common
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. The specified fire seal closes the gap for all of these and the building feels the difference. For buildings around smaller places like Wolverton Common, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.
Why appoint us
- Constructionline member for supplier checks
- One number for every site we cover
- 12-month guarantee on workmanship
- Joints cleaned back to sound surfaces
Read what affects the cost and how we’re accredited.
Common questions from Wolverton Common clients
Is a hospital such as Park Prewett Hospital somewhere you can work?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
How does the move away from BS 476 affect penetration seals in Wolverton Common?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Do you work in Wolverton Common?
Yes. We cover Wolverton Common, and the simplest way to start is to call the office on 01277 525 020 or email us.
What will the job cost?
Every job gets its own fixed quote. For yours, ring 01277 525 020 or email the details over with a description of the work.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Compartments and services around Wolverton Common
In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Wolverton Common lies roughly 49 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
In a hotel such as The George & Dragon Country Pub & Hotel, which lies south-east of Wolverton Common, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Offices at parks like Scion Business Park (to the north of Wolverton Common) are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.
Wolverton Common is about 3 miles south-west of Tadley, in Hampshire. Our applicators travel to Wolverton Common for work on service penetrations, handled exactly as we handle every other area. Across Hampshire, 723 places are covered, including Wolverton Common. Sites around Reading have their own page, about 12 miles away.
Anyone looking for fire stopping in RG26 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Wolverton Road and Holt Lane. If your building is just outside Wolverton Common, we cover Townsend (1 mile south), Axmansford (1 mile north-east), Inhurst (2 miles north-east), Baughurst (2 miles north-east) and Heath End (2 miles north-east). Nearby towns on our patch include Basingstoke (6 miles south-east), Andover (15 miles south-west), Tadley (3 miles north-east), Hook (11 miles east), Popley (6 miles south-east) and Kempshott (7 miles south).
What’s near Wolverton Common
In Wolverton Common, that means premises near The George And Dragon Public House and the streets around them. Wolverton Common’s nearest station is Midgham station, about 4.4 miles north. Nearby you will also find Park Prewett Hospital (5 miles south-east).
Surface by surface
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter, so we check before sealing.
Cost factors for service penetrations
Your fixed quote is built from the real scope. It allows for:
- The total length or number of joints
- The site’s rules and procedures
- Travel to remote or island sites
- Backing rod, priming and other preparation
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Sending details for a quote
There’s no need for a formal survey. These details are enough to start:
- The postcode of the building
- How the joints are reached, and at what height
- The asbestos register, for older buildings
- Any specification or named product
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
What we can’t put right
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Plastic pipes whose detail calls for a collar or wrap
- Deciding what a wall or floor needs, which belongs to the designer
- Approving the work on behalf of building control
Not sure which it is? You can ring 01277 525 020 or use the quote form and we’ll tell you honestly.
Surfaces we seal
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers