Fire Stopping in Baughurst
Need fire stopping in Baughurst? It’s simple: send details, get a quote, we seal, guaranteed.
- Unsealed openings around new pipes and cables
- Fire stopping installed outside its tested range
- Unsealed joints where partitions meet the slab
Fire stopping for Baughurst sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Baughurst
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail, not a rule of thumb. Most enquiries involve unsealed penetrations discovered above suspended ceilings and seals that don’t match their tested detail, on pipe penetrations, linear gaps at wall heads and cable penetrations. A specialist sealant contractor works differently from a general builder: on jobs in Baughurst, preparation and product choice get the time they need.
A job near Baughurst is usually planned around one visit, so send the specification and photos first. Design and sign-off belong to the designer or building control; we install what’s specified.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.
- Location
- Baughurst (RG26)
- Wider area
- Hampshire
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Quoting for work in Baughurst
The price varies from site to site. Expect it to depend on:
- Joint width, depth and condition
- Phasing around occupants
- The product specified
- How much there is to seal
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
What to include in your enquiry
There’s no need for a formal survey. A few details are enough to get going:
- The asbestos register, for older buildings
- Drawings or a marked-up plan, if available
- Any dates the work must fit around
- What the building is and how it’s used
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
FAQs: Baughurst
Is hospital work, at somewhere like Park Prewett Hospital, something you do?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
What does the BS 476 change mean for fire-rated sealant in Baughurst?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Do you take on small jobs?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
How the job changes by surface
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance, including keys, permits and any isolations.
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do and we’ll tell you what the detail says instead.
Where services cross fire walls in Baughurst
At about 47 miles from central London, Baughurst is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
Hospital estates such as Park Prewett Hospital (to the south-east of Baughurst) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. In a hotel such as The Broomsquire Hotel, 1.4 miles east of Baughurst, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. In a school such as The Hurst School, fire-rated sealant goes in around service penetrations where it is specified.
Baughurst is about 1 mile west of Tadley, in Hampshire. Across the RG26 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Baughurst is one of 723 places we cover in Hampshire. Reading is covered too, some 11 miles away.
We cover the RG26 postcode districts for service penetrations. We cover commercial and managed buildings on Blackthorn Close, Brimpton Road and Wolverton Road and the roads nearby. We also cover Inhurst (1 mile north-west), Heath End (1 mile north), Axmansford (1 mile south-west), Tadley (1 mile east) and Brimpton Common (1 mile north-west) for service penetrations. Further afield, our area takes in Basingstoke (7 miles south-east), Fleet (15 miles east), Yateley (14 miles east), Hook (10 miles south-east), Popley (6 miles south-east) and Kempshott (8 miles south).
What’s near Baughurst
We work on buildings around Wellington Arms Public House and Burnham Copse Primary School. The closest station to Baughurst is Midgham station, roughly 3.1 miles north of the centre. Nearby you’ll also find Park Prewett Hospital (5.4 miles south-east) and Calleva Museum (3 miles east).
Also near Baughurst
What else we do in Baughurst
Why it’s worth doing now in Baughurst
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. Halls, stores and units around places like Baughurst may not be checked every day, which gives a failed joint time to do damage. Resealing early avoids that.
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you are ready.
Why clients in Baughurst choose us
- CHAS accredited
- 12 months’ guarantee on every job
- Fixed quotes based on photos, drawings or a visit
- Sealing commercial buildings since 2005
See how commercial sealant jobs are priced and how we’re accredited.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Smaller jobs around Baughurst can be grouped with others nearby. A fixed quote is given before anything starts.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Move anything stored against the joints
- Let us know about inductions and permits
- Share the asbestos register for older buildings
Request a quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or send photos by email to discuss it first.
Related advice
Honest limits
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be one of these:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Large openings beyond what any sealant detail covers
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Where we work in Baughurst
- Cable penetrations
- Service gaps in risers
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
Site staff or a sealant specialist?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.