Fire-rated sealing and fire stopping in Yateley, Hampshire
Fire-rated and intumescent sealing of service penetrations and linear gaps in Yateley and across Hampshire. CHAS accredited and fully insured, with a 12-month guarantee.
- Openings found when ceilings come down for a refit
- Fire seals cut back for extra cables and never reinstated
- Snag lists that include open service penetrations
Fire stopping in Yateley
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What sealant work can’t fix
Before quoting, we check that sealant is the right answer. It won’t put right:
- Openings that need collars, wraps, batts or boards rather than sealant
- Gaps in walls that were never built as compartment walls
- Writing the fire-stopping specification
If in doubt, speak to us on 01277 525 020 or send photos by email and we will say what we think.
Where we work in Yateley
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Pipe penetrations
How we handle fire stopping in Yateley
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. So our job is to reproduce that arrangement faithfully. We work on joints between fire-resisting walls and floors, pipe penetrations and linear gaps at wall heads, and the failures we’re asked to look at most are expanding foam used as fire stopping and fire sealant pulled out of the opening. For commercial sealant work in Yateley, you deal with one contact from quote to sign-off, whether it’s one building or several.
Older buildings in towns like Yateley have often been rewired and replumbed several times, with gaps around pipes and cables left after each change. Intumescent or fire-rated sealant is used wherever the specification asks for it, built up exactly as tested.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Yateley (GU46)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
How a job runs
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. In a town such as Yateley, most jobs are single buildings. We start with your photographs, drawings or a site visit, then send a fixed quote.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Let building users know which areas are affected
- Point out parking and an unloading spot
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or speak to us on 01277 525 020 or email a schedule or drawings to discuss it first.
Advice
Questions we are asked in Yateley
What does the BS 476 change mean for fire-rated sealant in Yateley?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is Blackbushe Business Park, near Yateley, within your area?
Yes. Our area takes in Yateley and its surroundings, with estates and business parks such as Blackbushe Business Park included. To start, just give us a call on 01277 525 020 or email us with the unit, the joints involved and your access times.
What do you charge?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we will confirm the curing time on the day.
Will you come and look before quoting?
Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit.
Why deal with it now?
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme which is why earlier is better. For businesses and landlords in Yateley, a tidy, sound joint also matters for appearance. Renewing it keeps the building looking cared for.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Commercial sealant work since 2005
- CSCS-carded applicators
- 12 months’ guarantee on every job
- One contact handling all your sites
See our cost guide or how we’re accredited.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Maintenance after handover
Regular inspection catches problems early. Specifically:
- Ask the designer to confirm details early on refits
- Report damaged or disturbed seals as soon as they’re spotted
- Check with the data sheet before painting over fire sealant
- Don’t let anyone top up a fire seal with the wrong product
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small.
Places near Yateley
More services for Yateley
Where services cross fire walls in Yateley
Yateley lies roughly 34 miles out from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product. Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
Holiday works at schools like Yateley School often leave service openings to seal before pupils return. Office fit-outs on sites such as Blackbushe Business Park, 0.6 miles south of Yateley, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. Wherever services are added at a hospital such as Pinewood Hospital (3.6 miles north-east of Yateley) the compartment line has to be made good with the specified product.
Yateley is about 4 miles north-west of Farnborough, in Hampshire. We cover commercial sites throughout Yateley, whether it’s a single job or part of a planned programme. We work across 723 places in Hampshire, large and small. There’s a separate page for Reading, about 10 miles away.
We cover the GU46 postcode districts. We cover commercial and managed buildings on Hall Lane, Calcott Park and Wistaria Lane. Main routes into Yateley include the B3272, which helps when planning parking and deliveries for the job. Nearby places we also cover include Darby Green (1 mile east), Eversley Cross (1 mile north-west), Little Sandhurst (1 mile north-east), Minley (2 miles south) and Eversley Centre (2 miles west) for service penetrations. A short drive away, we cover Basingstoke (13 miles south-west), Farnborough (4 miles south-east), Fleet (4 miles south), Aldershot (7 miles south-east), Alton (14 miles south-west) and Tadley (13 miles west).
Local landmarks in Yateley
We work on buildings around Dog & Partridge pub, Cranford Park Primary and Ambarrow Court. For rail, the closest station is Sandhurst station, roughly 1.3 miles north-east. Other landmarks nearby include Staff College Museum (3.6 miles east) and Pinewood Hospital (3.6 miles north-east). For a walk, there’s Horseshoe Lake and Hitches Hill.
When to bring in a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.