Fire Stopping in Townsend
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Townsend. Send details for a fixed quote.
- Fire stopping installed outside its tested range
- Penetration schedules that need working through
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for businesses in Townsend
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Signs you need fire stopping in Townsend
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is when untested combinations creep in.
These are often picked up first by site or facilities staff:
- Fire stopping installed outside its tested range
- Non-fire-rated filler around services
- Fire seals cut back for extra cables and never reinstated
- Fire-stopping items raised at inspection or handover
Schools such as The Hurst School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
What to look for in a quote
- How they handle RAMS and site documents
- Health and safety accreditation such as CHAS
- Which product they’ll use, and why it suits the joint
- What level of public liability insurance do they hold?
Fire stopping for commercial buildings in Townsend
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it, matching the product and detail it names. Where there isn’t one, the designer or fire engineer needs to set one first. We work on linear gaps at wall heads, service gaps in risers and cable penetrations, and what we are called in for most is non-fire-rated filler around services and fire-stopping items raised at inspection or handover. A single leaking joint is often how a building in Townsend first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
A job near Townsend is normally planned around one visit, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Townsend (RG26)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Work for main contractors and building owners
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Honest limits
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Construction that lacks the fire resistance the seal relies on
- Large openings beyond what any sealant detail covers
- Reviewing a building’s overall fire safety
If in doubt, give us a call on 01277 525 020 or email us and we’ll say what we think before you book.
What we seal
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Linear gaps at wall heads
Where services cross fire walls in Townsend
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Townsend lies roughly 49 miles out from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
For a hospital such as Park Prewett Hospital (4.5 miles south-east of Townsend), penetration sealing is usually phased ward by ward, with infection-control rules agreed first. Older community buildings such as Church of St Catherine that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Townsend is about 3 miles south-west of Tadley, in Hampshire. Across the RG26 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Across Hampshire, 723 places are covered, Townsend among them. Our Reading page has more on work in that area (13 miles or so).
Commercial sites across RG26 are covered. Just outside Townsend, we also work in Wolverton Common (1 mile north), Axmansford (2 miles north), West Heath (2 miles east), Ramsdell (2 miles south-east) and Baughurst (2 miles north-east). Further afield, our area takes in Basingstoke (6 miles south-east), Andover (15 miles south-west), Alton (15 miles south-east), Tadley (3 miles north-east), Hook (11 miles east) and Popley (5 miles south-east).
Around Townsend
Recent enquiries here include premises near The George And Dragon Public House. For rail, the closest station is Midgham station, roughly 4.9 miles north. Other landmarks nearby include Park Prewett Hospital (4.5 miles south-east).
What affects the price in Townsend
Before we quote, we look at:
- How much there is to seal
- Backing rod, priming and other preparation
- How accessible the joints are
- Induction, permit and paperwork requirements
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What to include in your enquiry
The more we know, the firmer the quote. Helpful details to send:
- The type of building and who uses it
- Clear photos of the problem areas
- Anything awkward about access or site hours
- When you need the work done
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. If you have questions first, call the office on 01277 525 020 or email drawings and photos.
Looking after the joints
Regular inspection catches problems early. In particular:
- Brief every trade that openings they make must be sealed
- Check risers and ceiling voids after each round of works
- Leave fire sealant to cure fully before covering it
- Agree the fire-stopping specification before services go in
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job.
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Townsend?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is a hospital such as Park Prewett Hospital somewhere you can work?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
How long does a typical visit take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
How do we ask for a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit before quoting.
Places near Townsend
What else we do in Townsend
How a job runs
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Smaller jobs around Townsend can be grouped with others nearby. You’ll have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Tell staff and tenants when we’ll be in
- Send your site hours and access windows
- Clear stock, furniture or equipment away from the joints
Ask for a quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or phone 01277 525 020 or email drawings and photos to discuss it first.