Basingstoke fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps in Basingstoke. CHAS accredited and fully insured, with a 12-month guarantee.
- Builders’ foam or ordinary silicone in compartment walls
- Penetration schedules that need working through
- Service penetrations left open after M&E works
Fire stopping across Basingstoke
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Basingstoke
Facilities managers in Basingstoke often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you have fire-stopping items raised at inspection or handover and unsealed joints where partitions meet the slab, we can help. One point of contact handles commercial sealant work in Basingstoke from the first photographs to the final walk-round, whether it’s one building or several.
Bigger buildings around a town like Basingstoke are often done in sequence: services first, then penetration and linear seals. Design and sign-off of fire stopping rest with the designer, fire engineer or building control; we install what has been specified.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
Commercial clients in Basingstoke
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Basingstoke can form part of a wider programme.
Places near Basingstoke
More services for Basingstoke
Looking after the joints
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Get seals inspected before ceilings and boxing close
- Keep product data and details in the fire safety file
- Report damaged or disturbed seals as soon as they’re spotted
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way, or a new specification from the designer.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there.
Common problems we fix in Basingstoke
Some service penetrations were never sealed at all, often hidden above suspended ceilings or behind boxing. Inspections, refurbishments and ceiling access usually bring them to light.
If one of these sounds familiar, it’s time for a closer look:
- Open linear gaps along the top of fire-resisting walls
- Fire-stopping items raised at inspection or handover
- Improvised or mixed-product fire seals
- Seals disturbed by maintenance and left open
Hotels such as Great Western Hotel (to the north-east of Basingstoke) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
What to look for in a quote
- How the joint faces will be prepared and primed
- Their approach to joint depth and backing
- The terms of the workmanship guarantee
- What level of public liability insurance do they hold?
Why act early in Basingstoke
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper. On a busy site in a large place like Basingstoke, a failed joint gets worse with every day of use. Catching it early keeps the fix simple.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why clients in Basingstoke choose us
- Constructionline member for supplier checks
- 12-month guarantee on workmanship
- Over 20 years of commercial sealing
- One contact handling all your sites
See how commercial sealant jobs are priced or how we’re accredited.
Common questions from Basingstoke clients
Can you seal penetrations in a hotel in Basingstoke after a refit?
Yes. We install fire-rated and intumescent sealant where it is specified. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.
Will you work in a care home in Basingstoke without moving residents out?
Yes. We agree rooms and times with the manager and work a few areas at a time. We follow the home’s own procedures throughout.
Are you CHAS accredited?
Yes. We are CHAS accredited and a Constructionline member.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
Is any job too small?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Which sealant will you use?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How many days will you need on site?
It depends on the scope, though a typical visit normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we will set out a timescale with the quote.
On site: what to expect
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. In a large town like Basingstoke, work on busy buildings is planned area by area, so the building keeps working. Send drawings or photos and we will set out a phasing plan with the quote.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Make sure the joints can be reached
- Send any specification or drawings in advance
- Share the asbestos register for older buildings
Request a quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to call the office on 01277 525 020 or email the details over.
Read more
When to bring in a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Fire-rated sealing for Basingstoke buildings
Basingstoke is about 46 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal. Two care or nursing homes sit less than 2 miles from Basingstoke. Where new services have gone through compartment walls in a care setting, the gaps need the specified product.
Where a unit on an estate such as Thornycroft Industrial Estate, which lies south-west of Basingstoke, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail. Hospital estates such as Basingstoke and North Hampshire Hospital, 1.2 miles to the north of Basingstoke, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Basingstoke is in Hampshire. Our applicators travel to Basingstoke for work on service penetrations, handled exactly as we handle every other area. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. There’s a separate page for Reading, about 14 miles away.
Business premises anywhere in RG24, RG22, RG21 and RG23 are within our area. If your site is on Church Square, Queen Annes Square and The Square or close by, send details and we’ll quote for service penetrations. You’ll find Basingstoke on or near the A30 and A33. Nearby places we also cover include South Ham (1 mile south-west), Winklebury (1 mile west), Brighton Hill (1 mile south), Rooksdown (1 mile north-west) and Buckskin (1 mile west) for service penetrations. A short drive away, we cover Farnborough (15 miles east), Fleet (11 miles east), Aldershot (15 miles east), Alton (10 miles south-east), Yateley (13 miles north-east) and Tadley (6 miles north). Basingstoke ranks among the main centres of Hampshire, with offices, shops, schools and other public and commercial buildings.
Around Basingstoke
We work on buildings around Cranbourne, The Costello School and The Rising Sun pub. For rail, the closest station is Basingstoke station, roughly 0.6 miles east. Well-known places in the area include Basing House (2.2 miles east) and The Malls (0.6 miles east). The countryside around Basingstoke includes Farleigh Hill and Daneshill Park Woods.