Scotland
Fire Stopping in Inverclyde
We cover 19 towns and villages across Inverclyde for fire stopping, with failed joints always cut out and a 12-month guarantee on our workmanship.
Need fire stopping in Inverclyde?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Where we work in Inverclyde
Fire-rated and intumescent sealing of service penetrations and linear gaps. Pick your town below to see the details for your area, and send details for a fixed quote.
Biggest towns in Inverclyde
Other services in Inverclyde
- Facade and window perimeter sealing
- Expansion and movement joint sealing
- Mastic sealing for building owners and managing agents
- Commercial sealant contractors
- Construction and new-build mastic
- Industrial and floor joint sealing
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
Postcodes in Inverclyde
About fire stopping in Inverclyde
No fire sealant works on its own: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. The enquiries we see most involve builders’ foam or ordinary silicone in compartment walls and seals that don’t match their tested detail, across cable penetrations, service gaps in risers and linear gaps at wall heads.
At the end of each section, we remove the tape, clean down and inspect every joint. Where the sealant needs time to cure before use, we tell you and sign the area.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
How we quote
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Why clients in Inverclyde choose us
- One contact handling all your sites
- 12-month guarantee on workmanship
- Fixed quotes based on photographs, drawings or a visit
- Health and safety: CHAS accredited
Ask for a quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or give us a call on 01277 525 020 or send details through our quote form if you’d rather talk the job through.
What’s near Greenock
In Greenock, that means premises near Watt Library, The James Watt pub and Wellington Academy, among other places. Greenock has its own railway station: Drumfrochar station. A little further out are McLean Museum and Art Gallery (0.6 miles north-east) and Oak Mall (0.7 miles north-east). Open spaces near Greenock include Lyle Hill.
Fire stopping across Inverclyde: the area picture
For buildings across Inverclyde, fire-stopping design and sign-off belong to the designer, fire engineer or building control. Our part is installing the specified product correctly, matched to the wall or floor and the services passing through.
Tenements in Scotland’s cities are often managed by property factors, with shared repairs agreed by the owners, so mastic work on shared parts may come through the factor. In the parts of Inverclyde near the sea, the elevations facing the weather are where sealant gives up first.
Greenock: Industrial units on estates such as Cappielow Trade Park (to the east of Greenock) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. In a hotel such as Tontine Hotel, 0.7 miles to the north of Greenock, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Quoting for work in Inverclyde
Quotes vary with the job. Expect it to depend on:
- Site requirements such as inductions and permits
- How much existing material needs removing
- Distance, for remote addresses
- Phasing around occupants
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
What we need to price the job
We can often quote from photographs and a few details. It helps to include:
- The postcode of the building
- Your programme or deadline
- A wide shot and a close-up of the area
- How the joints are reached, and at what height
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, call 01277 525 020 or email a schedule or drawings.
What we’re called out for in Inverclyde
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
Common reasons buildings call us in:
- Expanding foam used as fire stopping
- Old intumescent sealant that has split away
- Snag lists that include open service penetrations
- Hidden openings found during inspections
Keeping the joints sound
A few simple habits keep the new joints working:
- Arrange inspection before areas are covered up
- Leave fire sealant to cure fully before covering it
- Keep product data and details in the fire safety file
- Put resealing into every M&E and fit-out package
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown, and report them promptly.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Questions we are asked in Inverclyde
What will the job cost?
There isn’t a price list, as every site differs. Send photographs or drawings and we’ll price it at a fixed figure.
Do you work in Inverclyde?
Yes. Sites across Inverclyde are covered.
Do you certify or sign off fire stopping?
No. Approval sits with the designer, principal designer or building control. We’ll confirm the products and details used, and you can tell us what other records you need at quote stage.
Does weather matter for sealant work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Do you have public liability insurance?
Yes. We are fully insured, including public liability cover.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
Can you seal any opening with fire-rated sealant?
No. A sealant’s evidence covers set services, gaps and wall or floor types. Outside that, a different product is needed.